Front and Rear | Enhancement Bush Kit
| KIT206K | 1 | | $1394.00 |
Mounting, control/trailing armEnhancement Bush KitKit contains: - Front Control Arm Lower-Inner Front & Rear Bush Kit
- Front Control Arm Upper-Inner Bush Kit
- Rear Control Arm Lower-Inner & Outer Bush Kit
- Rear Control Arm Upper-Inner Bush Kit
- Rear Toe Control Arm Inner Bush Kit
- Rear Trailing Arm Lower-Front Bush Kit
- Rear Trailing Arm Lower-Rear Bush Kit
- Fitting Difficulty: difficult
- Fitting time [min]: 540
- Axle alignment required after fitting
- Fitting Position: Front and Rear
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front & Rear Bush Kit
| SPF4634K | 1 | | $300.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front & Rear Bush Kit- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front Bush Kit
| SPF4634FK | 1 | | $184.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush Kit- Fitting Position: Front
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit
| SPF4635K | 1 | | $241.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Replacement Ball Joint for Fixed Offset Control Arm
| KIT6500RK | 2 | | $82.00 |
Ball Joint Repair KitControl Arm Replacement Ball Joint for Fixed Offset Control ArmThis kit contains one replacement heavy-duty high-articulation ball joint for the SuperPro fixed offset Upper control arm. The kit contains a brand-new ball joint, which also includes a new dust boot, circlip, nut and any other required installation hardware. Notes: If both ball joints need replacing, two kits will be required.
This kit is used to replace the ball joint in the following part numbers: TRC6500, TRC6505, TRC6730
Vehicle Application Information: - replacement Ball Joint to suit TRC6500, TRC6505 & TRC6730 only
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Control Arm Replacement Bush Kit for Fixed Offset Control Arm
| KIT6730K | 2 | | $43.00 |
Mounting Kit, control/trailing arm mountingControl Arm Replacement Bush Kit for Fixed Offset Control ArmThis kit contains two replacement SuperPro polyurethane bushings for the SuperPro fixed offset upper control arm. The replacement kit contains new bushings, crush tubes, a tube of grease and any other required hardware such as washers.
Note: Two kits will be required if the bushings in both arms need replacing.
This kit is used to replace the bushings in the following part numbers: TRC6730
Vehicle Application Information: - replacement bush kit to suit TRC6730 only
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: TRC6730 (x2)
|
Front | Control Arm Upper Complete Assembly - Fixed Offset
| TRC6730 | 1 | | $722.00 |
Control/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - Fixed OffsetVehicle Application Information: - providing an increase of 1 degree of caster over the OE UCA
Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement Fixed offset upper control arms with heavy-duty, high-articulation ball joints and SuperPro polyurethane bushings for 1 to 3 inch lifted vehicles.The SuperPro fixed offset upper control arm (UCA) is a high-performance aftermarket component designed to enhance the wheel alignment of lifted 4x4 vehicles, resulting in reduced tire wear and improved overall performance. This UCA is constructed using high-strength steel forgings and tube steel, making it durable and reliable for heavy-duty use. The components are robot-welded, ensuring consistent and precise manufacturing standards. The SuperPro fixed offset UCA features a heavy-duty high-articulation ball joint that enables the suspension to have greater articulation without binding, allowing for improved control and handling over rough terrain. This UCA also includes SuperPro’s renowned polyurethane bushings, which offer superior resilience and durability compared to traditional rubber bushings. The polyurethane material is resistant to abrasion, wear, and chemicals, making it ideal for harsh off-road environments.
Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: KIT6500RK (x1)
|
Front | Control Arm Upper-Inner Bush Kit
| SPF1956K | 1 | | $ |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitVehicle Application Information: - Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush Kit
| SPF3792K | 1 | | $267.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Rack End
| TRC4090 | 2 | | $103.00 |
Rack, steering gearRack End- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | ReadyStrut Top Caps
| RS007 | 2 | | $127.00 |
Suspension Strut MountingReadyStrut Top CapsStrut Cap, Spring Seat, Bump Stop & Boot, Nuts & Washers - Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Shock Absorber Lower Bush Kit
| SPF2940PK | 1 | | $156.00 |
Bush, shock absorberShock Absorber Lower Bush KitUtilises superior SuperPro Hybrid material for massive increase in durability in all applications. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Shock Absorber Upper Bush Kit
| SPF4646K | 1 | | $141.00 |
Bush, shock absorberShock Absorber Upper Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Spring Insulator Pad Bush Kit
| SPF2994K | 1 | | $99.00 |
Spacer Bushing, leaf spring hangerSpring Insulator Pad Bush KitUpper spring seat bushing - Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Strut Top Spacer Kit
| TRC008-6 | 1 | | $117.00 |
Spacer Sleeve, suspension strut support mountStrut Top Spacer KitOD: 125mm ID: 79mm H: 6mm Need more lift?? If you have added extra accessories to the front of your 4WD and need to correct the ride height, now SuperPro has the solution! The SuperPro Strut Spacer Kit can help with correcting lost ride height on either one side or both sides of your 4WD without having to change springs. Vehicle Application Information: - Raises vehicle approximately 10-12mm
- Fitting Position: Front
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4062L | 1 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
120 Degree opposed
Length 78mm center to center Vehicle Application Information: - suits vehicles with 12mm bolts, LHS - Standard Replacement
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4062R | 1 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
120 Degree opposed
Length 78mm center to center Vehicle Application Information: - suits vehicles with 12mm bolts, RHS - Standard Replacement
- Fitting time [min]: 30
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1225 | 1 | | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: 12mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1493-29K | 1 | | $52.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 24, 25, 26, 27, 28, 29, 30, 31, 32, 34, 36 & 37mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1493-30K | 1 | | $52.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 24, 25, 26, 27, 28, 29, 30, 31, 32, 34, 36 & 37mm Vehicle Application Information: - Fitting time [min]: 45
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1493-31K | 1 | | $52.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 24, 25, 26, 27, 28, 29, 30, 31, 32, 34, 36 & 37mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Front
- Part of kit: (x)
|
Front | Swaybar to Chassis Bush Kit
| SPF1493-34K | 1 | | $52.00 |
Mounting, stabiliser barSwaybar to Chassis Bush Kitavailable Sizes 24, 25, 26, 27, 28, 29, 30, 31, 32, 34, 36 & 37mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Front
- Part of kit: (x)
|
Rear |
| SPF4891K | 1 | | $298.00 |
Mounting Kit, control/trailing arm mounting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Coil Spring Spacer Bush Kit - Upper & Lower
| SPF5410K | 1 | | $127.00 |
Spacer Bushing, leaf spring hangerCoil Spring Spacer Bush Kit - Upper & LowerA=153mm B=105mm C=10mm & A=162.50mm B=85.50mm C=5mm - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner & Outer Bush Kit
| SPF2056HK | 1 | | $157.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner & Outer Bush KitVehicle Application Information: - H Kit for Severe Conditions or Heavy Duty applications
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner & Outer Bush Kit
| SPF2056K | 1 | | $230.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner & Outer Bush KitVehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Bush Kit
| SPF4669K | 1 | | $111.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitVehicle Application Information: - +/- 0.75 Degrees Camber Adjustment available
Vehicle Application Information: - alignment correction
- camber adjustable
- Fitting Position: Rear
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential Front Support Mount Kit
| SPF2739K | 1 | | $91.00 |
Mounting, differentialDifferential Front Support Mount KitVehicle Application Information: - Both ends of aluminium brace arm at front of diff
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Differential to Subframe Mount Bush Kit
| SPF2750K | 1 | | $265.00 |
Mounting, differentialDifferential to Subframe Mount Bush KitLocated at the rear of the differential. Heavy Duty option, can increase NVH Vehicle Application Information: - Heavy Duty Kit - can cause NVH
- remove original shell
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Differential to Subframe Mount Bush Kit - SupePro Hybrid
| TRC2750 | 1 | | $268.00 |
Mounting, differentialDifferential to Subframe Mount Bush Kit - SupePro HybridStandard option with SuperPro Hybrid Technology - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Sway Bar Link Cut To Length Link | TRC4007 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkCut To Length Link 12mm Ball Joint Link
Minimum Length 90mm - Maximum Length 320mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1245 | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: 12mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Front
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF0343-23K | 1 | | $46.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 16, 18, 20, 22, 23, 24, 25, 26, 27, 28 & 31mm Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF0343-24K | 1 | | $46.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 16, 18, 20, 22, 23, 24, 25, 26, 27, 28 & 31mm Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF0343-25K | 1 | | $46.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 16, 18, 20, 22, 23, 24, 25, 26, 27, 28 & 31mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Toe Control Arm Inner Bush Kit
| SPF2057HK | 1 | | $87.00 |
Mounting, control/trailing armToe Control Arm Inner Bush KitVehicle Application Information: - H Kit for Severe Conditions or Heavy Duty applications
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Part of kit: (x)
|
Rear | Toe Control Arm Inner Bush Kit
| SPF2057K | 1 | | $107.00 |
Mounting, control/trailing armToe Control Arm Inner Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
Rear | Trailing Arm Lower-Front Bush Kit
| SPF2777K | 1 | | $195.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Front Bush Kit- Fitting Position: Rear
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Trailing Arm Lower-Rear Bush Kit
| SPF2055HK | 1 | | $130.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Rear Bush KitVehicle Application Information: - Heavy Duty
- remove original shell
- Fitting Position: Rear
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Trailing Arm Lower-Rear Bush Kit
| SPF2055K | 1 | | $123.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Rear Bush KitVehicle Application Information: - standard replacement
- remove original shell
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|