Front | Control Arm Assembly Kit
| TRC1018 | 1 | | $507.00 |
Control/Trailing Arm, wheel suspensionControl Arm Assembly KitVehicle Application Information: Left and right Arms for Standard Replacement and Repair Upgrade. Kit includes left and right arms, ball joints and all bushings These arms utilise SuperPro bushings and are manufactured from high strength steel and come complete with a heavy duty ball joint. By eliminating the O.E style rubber bushings, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. Vehicle Application Information: - standard replacement
- Includes Ball Joint
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Control Arm Lower Front Bush Kit
| SPF4208K | 1 | | $88.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush Kit- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit
| SPF4205K | 1 | | $184.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit - Double Offset
| SPF4207K | 1 | | $184.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Double OffsetVehicle Application Information: - adds +/- 1.5 degrees camber
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Alignment Correction. Caster Adjustment
- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit - Single Offset
| SPF4206K | 1 | | $169.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Single OffsetVehicle Application Information: - 1 degree caster adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Alignment Correction. Caster Adjustment
- Steering Pull Correction Kit
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4028L | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
160 degree opposed
Length 285mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4028R | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
160 degree opposed
Length 285mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting Difficulty: moderate
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar To Chassis Bush Kit
| SPF4204-23K | 1 | | $65.00 |
Mounting, stabiliser barSway Bar To Chassis Bush Kitavailable Sizes 21, 22, 23, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Blade Control Arm Front Kit
| SPF4217K | 1 | | $411.00 |
Mounting Kit, control/trailing arm mountingBlade Control Arm Front Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
Rear | Control Arm Lower Inner & Outer Bush Kit
| SPF4210K | 1 | | $229.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner & Outer Bush Kit- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Inner & Outer Bush Kit
| SPF4212K | 1 | | $154.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner & Outer Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper Outer Bush Kit
| SPF4213K | 1 | | $103.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Outer Bush KitVehicle Application Information: - +/- 1 Degree Camber Adjustment available
Vehicle Application Information: - Alignment correction. Camber adjustment
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Suits OEM Sway Bar | SPF4203-15K | 1 | | $66.00 |
Mounting, stabiliser barSway Bar Mount Bush KitSuits OEM Sway Bar available Sizes 15, 18, 19, 21 & 22mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF4203-19K | 1 | | $66.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 18, 19, 21 & 22mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Toe Control Arm Inner & Outer Bush Kit
| SPF4215K | 1 | | $151.00 |
Mounting Kit, control/trailing arm mountingToe Control Arm Inner & Outer Bush Kit- Fitting Position: Rear
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|