| Front and Rear | Alignment & Enhancement Kit
| KIT167K | 1 |  | $1774.00 |
Mounting, control/trailing armAlignment & Enhancement KitKit contains: - Front Control Arm Upper-Inner Bush Kit
- Front Control Arm Lower-Outer Bush Kit
- Front Control Arm Lower-Inner Bush Kit - Double Offset
- Front Strut Bar To Chassis Mount Bush Kit - Double Offset
- Front Steering Rack & Pinion Mount Bush Kit
- Rear Control Arm Upper-Inner or Outer Bush Kit - Double Offset
- Rear Control Arm Lower-Inner Bush Kit
- Rear Trailing Arm Lower Bush Kit
- Rear Trailing Arm Upper Bush Kit - Offset
- Rear Toe Control Arm Inner & Outer Bush Kit
Vehicle Application Information: - Fitting time [min]: 1380
- Fitting Position: Front and Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front and Rear | Enhancement Bush Kit
| KIT166K | 1 | | $1556.00 |
Mounting, control/trailing armEnhancement Bush KitKit contains: - Front Control Arm Upper-Inner Bush Kit
- Front Control Arm Lower-Outer Bush Kit
- Front Control Arm Lower-Inner Bush Kit
- Front Strut Bar To Chassis Mount Bush Kit
- Front Steering Rack & Pinion Mount Bush Kit
- Rear Control Arm Upper-Inner & Outer Bush Kit
- Rear Control Arm Lower-Inner Bush Kit
- Rear Control Arm Upper-Inner & Outer Bush Kit
- Rear Trailing Arm Lower Bush Kit
- Rear Toe Control Arm Inner & Outer Bush Kit
Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front and Rear
- Fitting time [min]: 1380
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 1380
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Bush Kit
| SPF3052K | 1 |  | $223.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitVehicle Application Information: - standard replacement
- to suit 2WD only
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Bush Kit - Double Offset
| SPF3054K | 1 | | $233.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush Kit - Double OffsetVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
2 x Offset Tubes in the Kit for Camber Adjustment A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- to suit 2WD only
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Bush Kit - Single Offset
| SPF3053K | 1 | | $230.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush Kit - Single OffsetVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - alignment correction
- Steering Pull Correction Kit
- to suit 2WD only
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower Outer Bush Kit
| SPF3055K | 1 | | $137.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Outer Bush KitVehicle Application Information: - shock absorber lower mount
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Upper Inner Bush Kit
| SPF3051K | 1 | | $273.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush Kit
| SPF3056K | 1 | | $79.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - complete kit for both sides
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit
| SPF3048K | 1 | | $223.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush KitVehicle Application Information: - Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush kit - Double Offset
| SPF3050K | 1 | | $233.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush kit - Double OffsetVehicle Application Information: - 1 degree caster adjustment available
2 x offset bushings for caster adjustment A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- to suit 2WD only
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit - Single Offset
| SPF3049K | 1 | | $226.00 |
 Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Single OffsetVehicle Application Information: - There must be at least 30mm of clearance between the droop stop and the chassis at ride height to avoid any damage to the arms.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - alignment correction
- Steering Pull Correction Kit
- to suit 2WD only
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF2914-30K | 1 | | $89.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 21, 30 & 32mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF2914-32K | 1 | | $155.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 21, 30 & 32mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
| Rear | Control Arm Lower Inner Bush Kit
| SPF3059K | 1 | | $160.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitVehicle Application Information: - Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 240
- Part of kit: (x)
|
| Rear | Control Arm Upper Inner & Outer Bush Kit
| SPF3057K | 1 | | $215.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner & Outer Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Control Arm Upper Inner or Outer Bush Kit - Double Offset
| SPF3064K | 1 | | $219.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner or Outer Bush Kit - Double OffsetVehicle Application Information: - 0.75 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Subframe to Chassis Mount Bush Kit
| SPF5166K | 1 | | $646.00 |
Bush, differential mountSubframe to Chassis Mount Bush Kit- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link Upper & Lower Bush Kit
| SPF2916K | 1 | | $78.00 |
Stabiliser Bar, suspensionSway Bar Link Upper & Lower Bush Kit- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF2915-16K | 1 | | $97.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 16, 18 & 20mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner & Outer Bush Kit
| SPF3060K | 1 | | $212.00 |
Mounting, control/trailing armToe Control Arm Inner & Outer Bush KitVehicle Application Information: - Fitting time [min]: 240
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Toe Control Arm Inner & Outer Bush Kit - Offset
| SPF3060XK | 1 | | $211.00 |
Mounting, control/trailing armToe Control Arm Inner & Outer Bush Kit - Offsetthis kit is needed to maintain toe, when SPF3064K is fitted. Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Trailing Arm Lower Bush Kit
| SPF3058K | 1 | | $211.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush Kitto suit both front & rear of the arms, rear position is located in the hub - Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 240
- Part of kit: (x)
|
| Rear | Trailing Arm Upper Bush Kit
| SPF3057K | 1 | | $215.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush KitVehicle Application Information: - to suit front and rear of arms
Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Trailing Arm Upper Bush Kit - Offset
| SPF3064K | 1 | | $219.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush Kit - OffsetVehicle Application Information: - 0.75 to 1 Degree of Camber Adjustment
- to suit front and rear of arms
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
