With the Toyota Adjustable Upper Control Arms released and used by Ricko from The Offroad Adventure Show, SuperPro is pleased to announce the release of the Ford Ranger, Everest and Mazda BT-50 Lift Align Arms.
These arms will deliver extra camber and up to Three Degrees of Castor on a lifted vehicle.
Built tough in Australia, there is nothing else available like these arms!
Ford Ranger 2011-2015
Ford Ranger 2015-on
Ford Everest 2015-on
Mazda BT50 2011-on
By utilising up to the minute modern design techniques and a desire to make the good even better, SuperPro have made some impressive changes to these arms.
Previously made from steel tube welded to a forged steel ball joint plate, the new arms utilise the O.E manufacturing style with a twist.
Firstly, a one piece pressed steel arm is made, then a flat steel internal section is robotically welded inside the pressing. This manufacturing approach results in an unbreakable product.
While looking every bit like an O.E arm, but with unrivalled durability and toughness built in.
Add to this suspension geometry changes built into the shape of the arm, along with a neutral ball joint position on a lifted vehicle to maximise ball joint articulation.
We all know that when these 4WDs are lifted they run out of Camber and Caster adjustment or have none at all. The Lift Align Arms are a product that will provide the solution, a complete replacement arm that gives camber and caster adjustment in one product!
This provides better handling, steering and traction, on and off road.
The trend to fit accessories, larger tyres & rims and suspension lift kits to the modern 4 X 4 has exposed the lack of any real O.E camber or caster adjustment. Left unresolved this leads to undesirable handling issues and premature tyre wear.
The new SuperPro Lift-Align Arms provide the widest range of camber and caster adjustment available, ensuring that whatever the circumstance, the geometry of the front suspension will not be compromised.
So what does this mean? Finally an arm solution that is purpose built for Aussie Lifted 4WDs, built tough and made locally to suit Australian conditions.
SuperPro engineers recently received service information regarding a failure of the front suspension bushing on this vehicle.
The O.E Original bushing is fluid filled for comfort however, the vehicle in Australian conditions is generally used in commercial applications on rough roads. Using our superior in house technology, time to market has been swift and we can now announce a new SuperPro part release allowing the highest users of this vehicle, fleets to have an economical repair to save down time.
As these vehicles are predominantly used as commercial vehicles carrying high loads, all this excessive movement causes handling, braking and tyre wear issues.
The O.E replacement option is only available genuine with the complete arm and is not a dealer stocked part. So what does this mean, it means the vehicle owner has to either have the vehicle off the road for a stretch or drive around with a failed part, not anymore!
The SuperPro bushing kit SPF4774K is the perfect solution, durable, cost effective and available!
SuperPro were able to research, develop and test their solution in a very short time frame, from enquiry to production. Parts in less than 5 months!
That’s the benefit of teaming up with a local manufacturer that can be responsive to the needs of the local repair market.
Using 40 years of knowledge and computer testing along with in service testing the SuperPro solution is available using design features to minimise noise vibration and harshness while offering a lifetime warranty.
The SuperPro bushing kit is the perfect solution, durable, cost effective and available as a spare part only, not incorporated in a complete control arm as an expensive repair.
This month we can release the new Alloy Arms for Subaru WRX & STi 2008-on.
The newest addition to the range are fitted with Offset Duroball bushings for an additional 1.5 Degrees of caster and featuring lightweight Alloy construction, these arms are the ideal upgrade for a WRX.
The new part numbers in the range feature:
• Complete Arm Kit with SuperPro Bushings
• Caster increase DuroBall bushing in the Rear Position
• High Strength Alloy - lighter than OEM Steel Arm
• Reduced arm flex
• Corrosion resistant
Alloy Lower Control Arm Assembly - Includes DuroBall Caster Increase
Subaru Impreza WRX GE Sedan - 2007-2011
Subaru Impreza WRX GJ Sedan - 2012-2014
Subaru Impreza WRX GP Hatch - 2012-2014
Subaru Impreza WRX Sti GJ Sedan - 2012-2014
Subaru Impreza WRX Sti GP Hatch - 2012-2014
Subaru Impreza WRX Sti GRB - 2008-2011
Subaru Impreza WRX Sti GV - 2007-2011
Alloy Lower Control Arm Assembly - Includes DuroBall Caster Increase
Subaru Impreza WRX & WRX Sti VA - 2014-on
Also available for the Subaru WRX & STi range are:
IMPREZA GC, GF & WRX & WRX Sti - 1992-2000
IMPREZA GD, GG & WRX & WRX Sti - 2000-2002
IMPREZA GD, GG & WRX & WRX Sti - 2002-2007
In June SuperPro delivers right across the range with both new vehicles and old classics!
SuperPro brings to the market a perfectly weighted replacement Radius arms for the Toyota Landcruiser.
This month we are transitioning the Nissan Navara and Pathfinder Front Control Arm bushings to our new design.
Incorporating a half shell design with more material, the new design bushes will work better and be easier to install and still have all the adjustability of the previous versions.
Nissan Navara D40 - 2005-2014
Nissan Navara NP300 4WD Dual Cab - 2015-on
Nissan Navara NP300 4WD Single & King Cab - 2015-on
Nissan Pathfinder R51 - 2005-on
Every so often along comes a new tool or gadget that makes you think about the way things are done in your workshop.
The SuperPro Press Tools are one of those tools.
Most old and new suspension bushings are pressed out and in with old bearing shells, sockets or anything you can find.
This creates a safety issue; given that heat treated steel will shatter under stress.
At last there is a high quality, cost effective solution for the ongoing issue of seized camber bolts in a Toyota Hilux 4WD.
SuperPro has released a complete set of front lower control arm camber bolts to solve this very issue, each kit contains one vehicle set.
The originals seize for many reasons and when this happens it makes replacing bushes, ball joints and performing a wheel alignment a nightmare!
Features & Benefits
A must have product for the shelf for any workshop/wheel aligner that works with these vehicles.
SuperPro now has a comprehensive range of Heavy Duty Adjustable Sway Bar Links available.
Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
With 19 Part numbers making up the range, adjustment from 75mm to 365mm and either a 10mm or 12mm Ball stud, there is a Sway Bar Link Kit available for most applications.
Features & Benefits
• 6060-T5 Alloy Link
• Large Ball for low friction and long life
• Spanner provision for on-car adjustment
• Eliminates sway bar link flex
• Allows for neutral sway bar positioning
• Maximises all positions on adjustable Sway Bars
• Suits lowered or raised vehicles
AVAILABLE NOW
This time we've made a lot of swedish cars a little bit better:
Some Volvos were enhanced with the release of our Engine steady bushings.
The voided O.E bushes flog out and now there is a SuperPro repair upgrade solution.
The Ford rear Swaybar link bush received a facelift this month with a redesign of the lower bushing and a new ‘Upper Bushes Only” Kit added to the range.
And some more New Release for the Suzuki Swift...
Part No: SPF4489K, SPF4490K, SPF4802K, SPF4802BK, SPF4754K, SPF4755K
Front Engine Steady Mount Bush Kit
Volvo S60 MK I - 2000-2010 Volvo V70 & S70 LS/LV - 11/1996-11/2000 Volvo V70 SW - 2000-2007 Volvo C70 Mk I - 1997-2005 Volvo XC70 Cross Country 1997-2007 Volvo XC90 MK I - 2002-2014 Volvo 850 LS, LW - 1991-1997 |
|
Front Engine Steady Mount Bush Kit
Volvo S60 MK I - 2000-2010 Volvo V70 & S70 LS/LV - 11/1996-11/2000 Volvo V70 SW - 2000-2007 Volvo C70 Mk I - 1997-2005 Volvo XC70 Cross Country 1997-2007 Volvo XC90 MK I - 2002-2014 Volvo 850 LS, LW - 1991-1997 |
|
Rear Sway Bar Link Bush Kit
Ford Falcon BA / BF Sedan - 2002-2007 Ford Falcon FG Sedan - 2008-on Ford Fairlane BA / BF - 2003-2007 Ford Territory SX & SY - 2004-2011 Ford Contour MK1 & MK2 01/1995 - 12/1999 Ford Cougar SW / SX - 1999-2003 Ford Mondeo HA, HB, HC, HD - 1995-2000 Mercury Cougar CDW27 - 1999-2002 |
|
Rear Sway Bar Link Bush Kit
Ford Falcon BA / BF Sedan - 2002-2007 Ford Falcon FG Sedan - 2008-on Ford Fairlane BA / BF - 2003-2007 Ford Territory SX & SY - 2004-2011 Ford Contour MK1 & MK2 01/1995 - 12/1999 Ford Cougar SW / SX - 1999-2003 Ford Mondeo HA, HB, HC, HD - 1995-2000 Mercury Cougar CDW27 - 1999-2002 |
|
Front Engine Mount Bush Kit
Suzuki Swift MZ, EZ - 2005-09/2010 |
SPF4755K
Front Engine Mount Bush Kit
Suzuki Swift MZ, EZ - 2005-09/2010 |
This month we have re designed our Toyota Prado & FJ Cruiser Front Control Arm Lower Front Bush Kit.
Following on from the re design of the Control Arm Rear Bush Kit, we have made both bushes easier to install and added a camber/ caster adjustable version as well!
We also now have completed the rear of the Nissan R51 Pathfinder with the release of Toe Arm bush.
By making an offset version we have added more adjustability to get the wheel alignment just right.
Some additional new releases for the Mazda RX-8, Honda Jazz & City and Holden Viva.
Part No: SPF4690K, SPF4691K, SPF3966K, SPF3475-16K, SPF4262K, SPF4485K
Front Control Arm Lower-Inner Front Bush Kit
Toyota Prado 120 Series - 2002-2010 Toyota 4 Runner GRN210/2154x4 - 2002-2009 Toyota FJ Cruiser GJS10 - 2006-2008 Toyota FJ Cruiser GJS15 - 2008 - On Toyota Hilux Surf _N210-215 - 2002-2009 Lexus GX SUV Wagon 2001-2009 |
Front Control Arm Lower-Inner Front Bush Kit - Adjustable
Toyota Prado 120 Series - 2002-2010 Toyota 4 Runner GRN210/2154x4 - 2002-2009 Toyota FJ Cruiser GJS10 - 2006-2008 Toyota FJ Cruiser GJS15 - 2008 - On Toyota Hilux Surf _N210-215 - 2002-2009 Lexus GX SUV Wagon 2001-2009 |
|
Rear Toe Control Arm Inner Bush Kit
Nissan Pathfinder R51 - 2005-on |
|
Rear Sway Bar Mount Bush Kit
Mazda RX-8 SE17 - 2003-2012 |
|
Part No: SPF3870K, SPF3871K, SPF3875K, SPF4524-__k, SPF4525-__K, SPF4527K, SPF4526K, SPF4529K, SPF4528K
Front Control Arm Lower-Front Bush Kit |
|
Front Control Arm Lower-Rear Bush Kit |
|
Front Control Arm Lower-Rear Bush Kit - Double Offset |
|
SPF4525-__K Rear Sway Bar To Lower Control Arm Bush Kit
|
|
SPF4527K Rear Control Arm Inner Bush Kit
|
|
Rear Control Arm Inner Bush Kit - Adjustable
0.5 Degree Camber available
|
|
Rear Control Arm Outer Bush Kit
|
|
Rear Control Arm Outer Bush Kit - Adjustable
|