Front | 24mm Heavy Duty Non Adjustable Sway Bar
| RC0004F-24 | 1 | | $389.00 |
Stabiliser Bar, suspension24mm Heavy Duty Non Adjustable Sway Bar- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: RC0004RZ-18 (x1)
|
Front | Control Arm Lower Inner Rear Bush Kit Standard replacement | SPF3395K | 1 | | $168.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitStandard replacement Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Double Offset
| SPF3397K | 1 | | $168.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Single Offset Alignment Correction | SPF3396K | 1 | | $168.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Single OffsetAlignment Correction Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - alignment correction
- Steering Pull Correction Kit
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front Bush Kit
| SPF1915K | 1 | | $60.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush KitBush OD 30mm
Tube 19x12.3x54 - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Engine Steady Mount Bush Kit Sports use only, replaces lower rear bushing in dogbone mount | SPF2907-70K | 1 | | $130.00 |
Mounting, engineEngine Steady Mount Bush KitSports use only, replaces lower rear bushing in dogbone mount - Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Engine Steady Mount Bush Kit Replaces Lower, Rear bushing in dogbone mount, Competition use | SPF2907-80K | 1 | | $133.00 |
Mounting, engineEngine Steady Mount Bush KitReplaces Lower, Rear bushing in dogbone mount, Competition use - Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit Note; Drivers side fixed | SPF3615K | 1 | | $37.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitNote; Drivers side fixed - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit OEM Bracket Part Number: 6Q0411333B Bar Diameters 16, 18, 19, 20, 22, 24, 25mm available | SPF2901-16K | 1 | | $64.00 |
Mounting, stabiliser barSway Bar Mount Bush KitOEM Bracket Part Number: 6Q0411333B Bar Diameters 16,18,19,20,22,24,25mm available - Fitting Position: Front
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit OEM Bracket Part Number: 6Q0411333B Bar Diameters 16, 18, 19, 20, 22, 24, 25mm available | SPF2901-18K | 1 | | $64.00 |
Mounting, stabiliser barSway Bar Mount Bush KitOEM Bracket Part Number: 6Q0411333B Bar Diameters 16,18,19,20,22,24,25mm available - Fitting time [min]: 90
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit OEM Bracket Part Number: 6Q0411333B Bar Diameters 16, 18, 19, 20, 22, 24, 25mm available | SPF2901-19K | 1 | | $64.00 |
Mounting, stabiliser barSway Bar Mount Bush KitOEM Bracket Part Number: 6Q0411333B Bar Diameters 16,18,19,20,22,24,25mm available - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 90
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit OEM Bracket Part Number: 6Q0411333B Bar Diameters 16, 18, 19, 20, 22, 24, 25mm available | SPF2901-20K | 1 | | $112.00 |
Mounting, stabiliser barSway Bar Mount Bush KitOEM Bracket Part Number: 6Q0411333B Bar Diameters 16,18,19,20,22,24,25mm available - Fitting time [min]: 90
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit OEM Bracket Part Number: 6Q0411333B Bar Diameters 16, 18, 19, 20, 22, 24, 25mm available | SPF2901-22K | 1 | | $112.00 |
Mounting, stabiliser barSway Bar Mount Bush KitOEM Bracket Part Number: 6Q0411333B Bar Diameters 16,18,19,20,22,24,25mm available - Fitting time [min]: 90
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | 18mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0004RZ-18 | 1 | | $574.00 |
Stabiliser Bar, suspension18mm Heavy Duty 2 Position Blade Adjustable Sway BarVehicle Application Information: - to suit vehicles with OE exhaust only
- Fitting Position: Rear
- Fitting time [min]: 210
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 210
- Part of kit: (x)
|
Rear | Beam Axle Pivot Bush Kit
| SPF3616K | 1 | | $223.00 |
Bush, beam axleBeam Axle Pivot Bush Kit- Fitting time [min]: 270
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|