Front | Camber Adjusting Bolt Kit
| SPF4351-15K | 1 | | $58.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitCamber Bolt Kit 15mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Inner Front Bush Kit
| SPF0996K | 1 | | $68.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Front
- Fitting time [min]: 150
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF2085K | 1 | | $198.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitVehicle Application Information: - Fitting time [min]: 210
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Double Offset
| SPF2087K | 1 | | $201.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 210
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Single Offset
| SPF2086K | 1 | | $201.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Single OffsetUse this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - alignment correction
- Steering Pull Correction Kit
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 210
- Fitting Position: Front
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit Suits models 08/2003 - on | SPF3566K | 1 | | $105.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitSuits models 08/2003 - on Vehicle Application Information: - to suit vehicles from 08/2003 - 11/2005
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit Suits models to - 07/2003 | SPF4122K | 1 | | $70.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitSuits models to - 07/2003 Vehicle Application Information: - to suit vehicles from 07/2000 - 07/2003
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4018 | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
180 Degree opposed
Length 285mm center to center Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 30
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: 10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF3179-22K | 1 | | $54.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: available Sizes 20, 22 & 24mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: SPF3179-24K (x1)
|
Front | Sway Bar Mount Bush Kit
| SPF3179-24K | 1 | | $54.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 20, 22 & 24mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 75
- Fitting Difficulty: easy
- Part of kit: SPF3179-22K (x1)
|
Rear | Shock Absorber Lower Bush Kit
| SPF2178-16K | 1 | | $28.00 |
Bush, shock absorberShock Absorber Lower Bush KitA=16mm B=24.5mm C=24mm D=36mm E=30mm Double Tapered Bushing - Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 90
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF0605-20K | 1 | | $41.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 12, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 & 27mm Vehicle Application Information: - 20mm ID
- Suits 32mm Bracket Height
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: (x)
|