| Front | Camber Adjusting Bolt Kit
| SPF4351-17K | 1 |  | $67.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitCamber Bolt Kit 17mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Bush Kit
| SPF0511K | 1 | | $82.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitVehicle Application Information: - SV20 SV21 ZV21 4cyl & V6 vehicles
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Outer Bush Kit
| SPF0321K | 1 | | $89.00 |
Mounting, stabiliser barControl Arm Lower Outer Bush KitVehicle Application Information: - sway bar to lower control arm
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 |  | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF0329-24K | 1 | | $74.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 24, 26 & 27mm Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF0329-26K | 1 | | $73.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 24, 26 & 27mm Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF0329-27K | 1 | | $71.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 24, 26 & 27mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit - Offset
| SPF0329-24AK | 1 | | $77.00 |
Mounting, stabiliser barSway Bar Mount Bush Kit - Offsetavailable sizes 24, 26 & 27mm Vehicle Application Information: - 24mm ID
- PS increased, DS standard caster
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit - Offset
| SPF0329-24BK | 1 | | $ |
Mounting, stabiliser barSway Bar Mount Bush Kit - Offsetavailable sizes 24, 26 & 27mm Vehicle Application Information: - 24mm ID
- PS increase, DS increase or decrease caster
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit - Offset
| SPF0329-26AK | 1 | | $73.00 |
Mounting, stabiliser barSway Bar Mount Bush Kit - Offsetavailable sizes 24, 26 & 27mm Vehicle Application Information: - 26mm ID
- PS increased, DS standard caster
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit - Offset
| SPF0329-27AK | 1 | | $72.00 |
Mounting, stabiliser barSway Bar Mount Bush Kit - Offsetavailable sizes 24, 26 & 27mm Vehicle Application Information: - 27mm ID
- PS increased, DS standard caster
- Fitting Position: Front
- Fitting time [min]: 60
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Camber Adjusting Bolt Kit
| SPF4351-14K | 1 | | $58.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitCamber Bolt Kit 14mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Control Arm Inner Bush Kit
| SPF1221K | 1 | | $69.00 |
Mounting Kit, control/trailing arm mountingControl Arm Inner Bush KitVehicle Application Information: - to suit rod type rear arms
Vehicle Application Information: - Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
| Rear | Control Arm Outer Bush Kit
| SPF1220K | 1 | | $63.00 |
Mounting Kit, control/trailing arm mountingControl Arm Outer Bush KitVehicle Application Information: - to suit rod type rear arms
Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 150
- Part of kit: (x)
|
| Rear | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Sway Bar Link
| TRC4021 | 2 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
180 Degree opposed
Length 108mm center to center Vehicle Application Information: - Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF0462-14K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 12, 14, 15, 16, 17, 18, 19 & 22mm Vehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | Trailing Arm Bush Kit
| SPF0823K | 1 | | $138.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Bush Kit- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
