Front | Control Arm Lower Inner Rear Bush Kit
| SPF2082K | 1 | | $101.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitVehicle Application Information: Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Double Offset
| SPF2084K | 1 | | $110.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Double OffsetVehicle Application Information: A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 210
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front Bush Kit Replaces OEM NUMBER: 357407182 | SPF1915K | 1 | | $60.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush KitReplaces OEM NUMBER: 357407182 Bush OD 30mm
Tube 19x12.3x54 - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Engine Support Insert Bush Kit
| SPF2575K | 1 | | $69.00 |
Rubber Buffer, engine mounting systemEngine Support Insert Bush Kit- Fitting Difficulty: moderate
- Fitting time [min]: 120
- Fitting Position: Front
- Part of kit: (x)
|
Front | Engine Support Lower Front Bush Kit
| SPF2576K | 1 | | $43.00 |
Rubber Buffer, engine mounting systemEngine Support Lower Front Bush KitVehicle Application Information: - Replacement of original rubber bush
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF3366K | 1 | | $44.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush Kit- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4063 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10.5mm ID Bush/Bush Link
90 Degree opposed
Length 105.5mm center to center Vehicle Application Information: - Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12245 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 300 mm - Maximum Length 345 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2593-21K | 1 | | $37.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 17, 18, 19, 20, 21, 22, 23, 25 & 26mm Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2593-22K | 1 | | $37.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 17, 18, 19, 20, 21, 22, 23, 25 & 26mm Vehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2593-23K | 1 | | $37.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 17, 18, 19, 20, 21, 22, 23, 25 & 26mm Vehicle Application Information: - Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Lateral Arm Lower Inner Bush Kit
| SPF2540K | 1 | | $133.00 |
Mounting Kit, control/trailing arm mountingLateral Arm Lower Inner Bush KitVehicle Application Information: - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Lateral Arm Lower Inner Bush Kit - Double Offset
| SPF2541K | 1 | | $110.00 |
Mounting Kit, control/trailing arm mountingLateral Arm Lower Inner Bush Kit - Double OffsetVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction - camber adjustment
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Part of kit: (x)
|
Rear | Lateral Arm Upper Inner Bush Kit
| SPF2540K | 1 | | $133.00 |
Mounting Kit, control/trailing arm mountingLateral Arm Upper Inner Bush KitVehicle Application Information: - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Lateral Arm Upper Inner Bush Kit - Double Offset
| SPF2541K | 1 | | $110.00 |
Mounting Kit, control/trailing arm mountingLateral Arm Upper Inner Bush Kit - Double OffsetVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction - camber adjustment
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2592-24K | 1 | | $85.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 15, 16, 18, 19, 20, 21, 22 & 24mm Vehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Trailing Arm Front Bush Kit
| SPF2536K | 1 | | $292.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Front Bush KitVehicle Application Information: - Standard & Excess toe adjustment attainable
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|