Front | Control Arm Upper Inner Bush Kit
| SPF3153K | 1 | | $183.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitVehicle Application Information: - Fitting time [min]: 240
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Upper Inner Bush Kit - Double Offset
| SPF3154K | 1 | | $284.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - Double OffsetVehicle Application Information: - 0.5 Degrees of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper Outer Bush Kit
| SPF3610K | 1 | | $115.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Outer Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper Outer Bush Kit - Double Offset
| SPF1811K | 1 | | $323.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Outer Bush Kit - Double OffsetVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit Suits BNR-34 GT-R, replaces passenger side OEM 54445-05U00 & Drivers side OEM 5444-AA300 | SPF2846K | 1 | | $195.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitSuits BNR-34 GT-R, replaces passenger side OEM 54445-05U00 & Drivers side OEM 5444-AA300 - Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit - Double Offset GTR. Caster adjustable kit | SPF1960K | 1 | | $162.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Double OffsetGTR. Caster adjustable kit A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1035 | 1 | | $154.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 65 mm - Maximum Length 70 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits - Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1647-21K | 1 | | $36.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 20, 21, 22, 23, 24, 27 & 28mm Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1647-22K | 1 | | $36.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 20, 21, 22, 23, 24, 27 & 28mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | 20mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0010RZ-20 | 1 | | $371.00 |
Stabiliser Bar, suspension20mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting Position: Rear
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | 22mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0010RZ-22 | 1 | | $389.00 |
Stabiliser Bar, suspension22mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0010RZ-24 | 1 | | $441.00 |
Stabiliser Bar, suspension24mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Bush Kit
| SPF1750K | 1 | | $136.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitVehicle Application Information: - housing width 42mm
- crush tube length 50mm
- Fitting time [min]: 270
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner & Outer Bush Kit Standard replacement kit "No Adjustment" | SPF1638K | 2 | | $150.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner & Outer Bush KitStandard replacement kit "No Adjustment" Vehicle Application Information: - standard replacement
- crush tube length 40mm
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner or Outer Bush Kit - Double Offset
| SPF1869K | 2 | | $222.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner or Outer Bush Kit - Double OffsetVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - crush tube length 40mm
- alignment correction
- Inner & outer camber adjustment
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting time [min]: 240
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential Pinion Mount Bush Kit
| SPF2582K | 1 | | $84.00 |
Bush, differential mountDifferential Pinion Mount Bush KitVehicle Application Information: - Re-use original inner tube. Front of differential mounting point.
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Differential Pinion Mount Bush Kit
| SPF2637K | 1 | | $107.00 |
Bush, differential mountDifferential Pinion Mount Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Differential To Crossmember To Chassis Mount Bush Kit
| SPF3775K | 1 | | $164.00 |
Bush, differential mountDifferential To Crossmember To Chassis Mount Bush Kit- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Rear
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Shock Absorber Lower Bush Kit Must remove original shell before fitment, suited to BNR34, Replaces original part number 56219-24U01 | SPF2722K | 1 | | $88.00 |
Bush, shock absorberShock Absorber Lower Bush KitMust remove original shell before fitment, suited to BNR34, Replaces original part number 56219-24U01 Vehicle Application Information: - Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Subframe Traction Bush Kit
| KIT201K | 1 | | $93.00 |
Bush, sub-frameSubframe Traction Bush KitA complete rear Subframe Kit for the rear of various Nissan 180SX, 200SX, 300ZX and Skyline models for Performance, Traction and Drifting. This kit allows for the rear subframe inclination angle to be changed for performance, traction or drifting. - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Link Bush Kit
| SPF2667K | 1 | | $40.00 |
Mounting, stabiliser barSway Bar Link Bush Kit- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-21K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-22K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-23K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-24K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Toe Control Arm Inner & Outer Bush Kit
| SPF2296K | 1 | | $126.00 |
Mounting, control/trailing armToe Control Arm Inner & Outer Bush Kit- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|