Front and Rear | Alignment & Enhancement Kit
| KIT126K | 1 | | $1047.00 |
Mounting, control/trailing armAlignment & Enhancement KitVehicle Application Information: Kit contains: - Front Control Arm Upper-Outer Bush Kit - Double Offset
- Front Strut Bar To Chassis Mount Bush Kit - Double Offset
- Front Steering Rack & Pinion Mount Bush Kit
- Rear Control Arm Lower-Inner Bush Kit
- Rear Control Arm Upper-Inner or Outer Bush Kit - Double Offset
- Fitting time [min]: 960
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front and Rear
- Part of kit: (x)
|
Front | 27mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0062FZ-27 | 1 | | $409.00 |
Stabiliser Bar, suspension27mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Bush Kit
| SPF1483K | 1 | | $277.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitVehicle Application Information: - Stepped shell 38mm to 40mm outside diameter
- Axle alignment required after fitting
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 210
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Upper Inner Bush Kit
| SPF3153K | 1 | | $183.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitVehicle Application Information: - Fitting time [min]: 240
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Upper Inner Bush Kit - Double Offset
| SPF3154K | 1 | | $284.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - Double OffsetVehicle Application Information: - 0.5 Degrees of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper Outer Bush Kit
| SPF3610K | 1 | | $115.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Outer Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper Outer Bush Kit - Double Offset
| SPF1811K | 1 | | $323.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Outer Bush Kit - Double OffsetVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF2681K | 1 | | $72.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - to suit BNR32 & HNR32
- pinion end 45.8mm
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF1202K | 1 | | $129.00 |
Bush, strut mountStrut Bar To Chassis Mount Bush KitVehicle Application Information: Vehicle Application Information: - standard replacement
- 69.5mm long crush tube, bracket width 40mm
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit - Double Offset
| SPF1202AK | 1 | | $190.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Double OffsetVehicle Application Information: A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- 69.5mm long crush tube, bracket width 40mm
- Fitting Position: Front
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1035 | 1 | | $154.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 65 mm - Maximum Length 70 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits - Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1484-24K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: available Sizes 15, 16, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 & 29 mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1484-25K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: available Sizes 15, 16, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 & 29 mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1484-26K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: available Sizes 15, 16, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 & 29 mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1484-27K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: available Sizes 15, 16, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 & 29 mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Front
- Part of kit: (x)
|
Rear | 20mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0010RZ-20 | 1 | | $371.00 |
Stabiliser Bar, suspension20mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting Position: Rear
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | 22mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0010RZ-22 | 1 | | $389.00 |
Stabiliser Bar, suspension22mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0010RZ-24 | 1 | | $441.00 |
Stabiliser Bar, suspension24mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Bush Kit
| SPF1750K | 1 | | $136.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitVehicle Application Information: - housing width 42mm
- crush tube length 50mm
- Fitting time [min]: 270
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner & Outer Bush Kit
| SPF1638K | 2 | | $150.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner & Outer Bush KitVehicle Application Information: - standard replacement
- crush tube length 40mm
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner or Outer Bush Kit - Double Offset
| SPF1869K | 2 | | $222.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner or Outer Bush Kit - Double OffsetVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - crush tube length 40mm
- alignment correction
- Inner & outer camber adjustment
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting time [min]: 240
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential Pinion Mount Bush Kit
| SPF2582K | 1 | | $84.00 |
Bush, differential mountDifferential Pinion Mount Bush KitVehicle Application Information: - Re-use original inner tube. Front of differential mounting point.
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Differential Pinion Mount Bush Kit
| SPF2637K | 1 | | $107.00 |
Bush, differential mountDifferential Pinion Mount Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Differential To Crossmember To Chassis Mount Bush Kit
| SPF3775K | 1 | | $164.00 |
Bush, differential mountDifferential To Crossmember To Chassis Mount Bush Kit- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Rear
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Shock Absorber Lower Bush Kit
| SPF2722K | 1 | | $88.00 |
Bush, shock absorberShock Absorber Lower Bush KitVehicle Application Information: Vehicle Application Information: - Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Subframe Mount Bush Kit
| SPF3774K | 1 | | $515.00 |
Bush, sub-frameSubframe Mount Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Subframe Traction Bush Kit
| KIT201K | 1 | | $93.00 |
Bush, sub-frameSubframe Traction Bush KitA complete rear Subframe Kit for the rear of various Nissan 180SX, 200SX, 300ZX and Skyline models for Performance, Traction and Drifting. This kit allows for the rear subframe inclination angle to be changed for performance, traction or drifting. - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: (x)
|
Rear | Sway Bar Link Bush Kit
| SPF2667K | 1 | | $40.00 |
Mounting, stabiliser barSway Bar Link Bush Kit- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-20K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-21K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-22K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Toe Control Arm Inner & Outer Bush Kit
| SPF2296K | 1 | | $126.00 |
Mounting, control/trailing armToe Control Arm Inner & Outer Bush Kit- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|