Front | Control Arm Assembly Kit
| TRC1031 | 1 | | $319.00 |
Control/Trailing Arm, wheel suspensionControl Arm Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit
| SPF3452K | 1 | | $204.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitVehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
| SPF3454K | 1 | | $204.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetVehicle Application Information: - 1.5 to 2 Degrees Caster change
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 90
- Fitting time [min]: 90
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
| SPF3453K | 1 | | $204.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetVehicle Application Information: - 1 degree caster adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - alignment correction
- Steering Pull Correction Kit
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Position: Front
- Fitting time [min]: 90
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 90
- Part of kit: (x)
|
Front | Subframe to Chassis Mount Bush - Rear Kit
| SPF4748K | 1 | | $277.00 |
Bush, sub-frameSubframe to Chassis Mount Bush - Rear Kit- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4007 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
Minimum Length 90mm - Maximum Length 320mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4036L | 1 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
160 degree opposed
Length 300mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting Difficulty: moderate
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4036R | 1 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
160 degree opposed
Length 300mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar To Chassis Bush Kit
| SPF4746-22K | 1 | | $98.00 |
Mounting, stabiliser barSway Bar To Chassis Bush KitVehicle Application Information: Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Control Arm Lower Inner & Outer Bush Kit
| SPF4744K | 1 | | $115.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner & Outer Bush Kit- Fitting time [min]: 150
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Part of kit: (x)
|
Rear | Control Arm Upper Inner & Outer Bush Kit
| SPF4745K | 1 | | $115.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner & Outer Bush Kit- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar To Chassis Bush Kit
| SPF4747-17K | 1 | | $61.00 |
Mounting, stabiliser barSway Bar To Chassis Bush KitVehicle Application Information: Vehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Front Bush Kit
| SPF4392K | 1 | | $193.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Front Bush Kit- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|