Front | Control Arm Lower Front Assembly Kit
| TRC1055 | 1 | | $295.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Front Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade The SuperPro front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with proprietary SuperPro bushings. We have made this kit by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry Vehicle Application Information: - standard replacement
- Includes Ball Joint
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Outer Bush Kit Also known as strut lower mount bushing | SPF2955K | 1 | | $102.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer Bush KitAlso known as strut lower mount bushing - Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Control Arm Upper Assembly Kit
| TRC1057 | 1 | | $301.00 |
Control/Trailing Arm, wheel suspensionControl Arm Upper Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade TheSuperPro front control arm kit has been designed to be an easy repairsolution. Offeringboth alignment and vehicle handling improvements. Designed not just as a repairsolution but as an upgrade! Suppliedas a complete kit and fully assembled with proprietary SuperProbushings. We have made this kit by far the best choice on themarket. These arms utilisethe SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised forlongevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are anupgrade from the factory arms, eliminating the undesirable arm movement tomaintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro stronglyadvises that both arms should always be replaced at the same time to maintainthe correct geometry. Vehicle Application Information: - standard replacement
- Includes Ball Joint
- Fitting Position: Front
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush Kit Standard replacement bushings | SPF2951K | 1 | | $298.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitStandard replacement bushings - Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush Kit - Double Offset Alignment Correction. 4 x offset tubes, designed for camber adjustment all points | SPF2953K | 1 | | $392.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Double OffsetAlignment Correction. 4 x offset tubes, designed for camber adjustment all points Vehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
This kit is used for enhanced handling performance and will enable camber adjustment in the absence of any camber adjustment on the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This kit requires a wheel alignment before installation to ensure the correct settings are selected upon installation. An after installation wheel alignment is also required. Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush kit - Single Offset Alignment Correction. Camber Adjustable | SPF2952K | 1 | | $330.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush kit - Single OffsetAlignment Correction. Camber Adjustable Vehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
This kit is used to correct and enable camber adjustment, in the absence of any camber adjustment on the vehicle, to one side. The purpose of this kit is to mitigate uneven tyre wear and correct geometry. This kit requires wheel alignment before installation to ensure the correct settings are selected upon installation. An after installation wheel alignment is also required. Follow the installation instructions and enjoy the results! Vehicle Application Information: - Steering Pull Correction Kit
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Radius Arm Assembly Kit
| TRC1056 | 1 | | $330.00 |
Control/Trailing Arm, wheel suspensionRadius Arm Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade The SuperPro front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with proprietary SuperPro bushings. We have made this kit by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry Vehicle Application Information: - standard replacement
- Includes Ball Joint
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Radius Arm To Chassis Mount Bush Kit Standard replacement | SPF2956K | 1 | | $247.00 |
Bush, strut mountRadius Arm To Chassis Mount Bush KitStandard replacement - Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Radius Arm To Chassis Mount Bush Kit Alignment Correction | SPF2957K | 1 | | $247.00 |
Bush, strut mountRadius Arm To Chassis Mount Bush KitAlignment Correction Vehicle Application Information: - There must be at least 30mm of clearance between the droop stop and the chassis at ride height to avoid any damage to the arms.
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Radius Arm To Chassis Mount Bush Kit Alignment Correction | SPF2958K | 1 | | $247.00 |
Bush, strut mountRadius Arm To Chassis Mount Bush KitAlignment Correction Vehicle Application Information: - 1 degree caster adjustment available
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link LHS - Standard Replacement | TRC4032L | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar LinkLHS - Standard Replacement 10mm Ball Joint Link
90 degree opposed
Length 155mm center to center - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Link RHS - Standard Replacement | TRC4032R | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar LinkRHS - Standard Replacement 10mm Ball Joint Link
90 degree opposed
Length 155mm center to center - Fitting time [min]: 30
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF3910-23K | 1 | | $61.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner & Outer Bush Kit
| SPF2555K | 2 | | $137.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner & Outer Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 180
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF3911-19K | 1 | | $54.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 19, 23 & 25mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|