Front | Camber Adjusting Bolt Kit Adds +/- 1.5 Degrees camber | SPF4351-12K | 1 | | $53.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 12mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF3111K | 1 | | $177.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitVehicle Application Information: - to suit vehicles from 08/2002-on
2 x Standard bushings per kit Vehicle Application Information: - Bush OD 60mm
- standard replacement
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Double Offset
| SPF3113K | 1 | | $197.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Double OffsetVehicle Application Information: - 1 degree caster adjustment available
- to suit vehicles from 08/2002-on
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Bush OD 60mm
- alignment correction
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Single Offset
| SPF3112K | 1 | | $197.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Single OffsetVehicle Application Information: - to suit vehicles from 08/2002-on
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Bush OD 60mm
- alignment correction
- Steering Pull Correction Kit
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit
| SPF4685K | 1 | | $164.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitVehicle Application Information: - to suit vehicles up to 08/2002
Vehicle Application Information: - standard replacement
- to suit 52mm ID arm
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit - Double Offset
| SPF4687K | 1 | | $287.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Double OffsetVehicle Application Information: - to suit vehicles up to 08/2002
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- to suit 52mm ID arm
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit - Single Offset
| SPF4686K | 1 | | $287.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Single OffsetVehicle Application Information: - to suit vehicles up to 08/2002
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - alignment correction
- to suit 52mm ID arm
- Steering Pull Correction Kit
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit Standard replacement. Suits 63mm ID lower arm. | SPF3133K | 1 | | $209.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitStandard replacement. Suits 63mm ID lower arm. Vehicle Application Information: - to suit vehicles from 08/2002-on
2 x Standard bushings per kit - Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset Alignment Correction. Suits 63mm ID lower arm. Replaces OEM Part Number 54584-1C300. | SPF3135K | 1 | | $208.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction. Suits 63mm ID lower arm. Replaces OEM Part Number 54584-1C300. Vehicle Application Information: - 1 degree caster adjustment available
- to suit vehicles from 08/2002-on
2 x offset bushings for caster adjustment A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset Alignment Correction. Suits 63mm ID lower arm. Replaces OEM Part Number 54584-1C300. | SPF3134K | 1 | | $208.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction. Suits 63mm ID lower arm. Replaces OEM Part Number 54584-1C300. Vehicle Application Information: - There must be at least 30mm of clearance between the droop stop and the chassis at ride height to avoid any damage to the arms.
- to suit vehicles from 08/2002-on
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4058 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
180 Degree opposed
Length 130mm center to center Vehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045A | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 125 mm - Maximum Length 145 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Trailing Arm Lower Front Bush Kit
| SPF0907K | 1 | | $83.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Front Bush KitVehicle Application Information: - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Part of kit: (x)
|
Rear | Trailing Arm Lower-Rear Bush Kit
| SPF0906K | 1 | | $98.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower-Rear Bush KitVehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|