Front | Alignment Bush Kit - Front End
| KIT152K | 1 | | $204.00 |
Mounting, control/trailing armAlignment Bush Kit - Front EndVehicle Application Information: Kit contains:- Front Control Arm Lower-Inner Bush Kit
- Front Strut Bar To Chassis Mount Bush Kit
- Front Strut Bar To Lower Control Arm Bush Kit
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 330
- Part of kit: (x)
|
Front | Bump Stop Bush Kit - Upper
| SPF0189K | 1 | | $96.00 |
Bump StopBump Stop Bush Kit - UpperVehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Bump Stop Kit
| SPF1833BK | 1 | | $141.00 |
Bump StopBump Stop Kit2 x Bump Stops & 2 x Boots per kit, 54mm Long x 67.5 Wide x 20-22mm Inside Diameter - Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit
| SPF2365-10K | 2 | | $42.00 |
Spring SeatCoil Spring Spacer Bush KitA=164mm B=127.5mm C=10mm Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit
| SPF2365-5K | 2 | | $29.00 |
Spring SeatCoil Spring Spacer Bush KitA=164mm B=127.5mm C=5mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Bush Kit
| SPF0251K | 1 | | $114.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush Kit- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Bush Kit
| SPF0842K | 1 | | $83.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush Kit- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Spring Insulator Bush Kit - Upper
| SPF2498K | 1 | | $81.00 |
Spring SeatSpring Insulator Bush Kit - UpperA=165mm B=128.7mm C=5.5mm D=13.5mm E=138mm, Helical Spring Seat - Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Strut Bar To Lower Control Arm Bush Kit
| SPF0756CK | 1 | | $71.00 |
Bush, strut mountStrut Bar To Lower Control Arm Bush KitComfort option to be used with SPF2339K
Suited to cast steel arms - Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Strut Bar To Lower Control Arm Bush Kit
| SPF0756K | 1 | | $71.00 |
Bush, strut mountStrut Bar To Lower Control Arm Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Strut Bolt Replacement Kit
| SPF4960K | 2 | | $89.00 |
Bolt, axle strutStrut Bolt Replacement Kit- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Strut Top & Bearing
| SPF1590BK | 1 | | $295.00 |
Bush, strut mountStrut Top & BearingPerformance Kit.
Kit contains SuperPro Polyurethane Mounts & Bearings. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link and Bush Kit
| SPF2966BK | 1 | | $94.00 |
Stabiliser Bar, suspensionSway Bar Link and Bush Kit165mm total Length, Thread Length each end 65mm Sway Bar Link and Bush Kit - Fitting Position: Rear
- Fitting Position: Front
- Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF0994K | 1 | | $47.00 |
Mounting, stabiliser barSway Bar Link Bush KitVehicle Application Information: - bushes only to suit after-market sway bar & SPF0987K
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF2755SK | 1 | | $16.00 |
Bush, shock absorberSway Bar Link Bush KitVehicle Application Information: - to suit original sway bar
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Link Rod Kit
| SPF0967K | 1 | | $126.00 |
Mounting, stabiliser barSway Bar Link Rod KitVehicle Application Information: - Heavy duty conversion link rod & bushing replacement kit for after-market swaybar
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Link Rod Kit
| SPF0968K | 1 | | $124.00 |
Mounting, stabiliser barSway Bar Link Rod KitVehicle Application Information: - Heavy duty conversion link rod & bushing replacement kit for original swaybar
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Link Rod Kit
| SPF0987K | 1 | | $78.00 |
Stabiliser Bar, suspensionSway Bar Link Rod KitVehicle Application Information: - heavy duty link rod & bush replacement, to suit from original sway bar to strut leg
Vehicle Application Information: - H/Duty link rod replacement & bush kit
- Fitting time [min]: 90
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1453-26K | 1 | | $44.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1453-27K | 1 | | $44.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1453-28K | 1 | | $44.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1453-30K | 1 | | $44.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Control Arm Bush Kit
| SPF0611K | 1 | | $102.00 |
Mounting Kit, control/trailing arm mountingControl Arm Bush KitVehicle Application Information: - to suit vehicles with independent rear suspension
Vehicle Application Information: - to suit IRS vehicles (Independent Rear Suspension)
- IRS vehicles require 2 kits if not using adjuster kits (SPF2545K).
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 180
- Part of kit: (x)
|
Rear | Differential Mount Insert
| SPF4170K | 1 | | $67.00 |
Bush, differential mountDifferential Mount InsertFits into voiding of original bushings - reduces unwanted differential movement Designed to fit into the voiding of the original rubber differential mount to eliminate excessive driveline movement to deliver an improved gear shift feel and superior power transmission through to the wheels. This mount insert will also lengthen the life of the original mount. - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | IRS Adjusting Camber & Toe Kit
| SPF0877K | 1 | | $321.00 |
Mounting, control/trailing armIRS Adjusting Camber & Toe KitSuited to vehicles without Factory Toe Adjusting Arm - Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | IRS Adjusting Kit Toe Only Bush Kit
| SPF0877TK | 1 | | $224.00 |
Mounting, control/trailing armIRS Adjusting Kit Toe Only Bush KitSuited to vehicles without Factory Toe Adjusting Arm - Fitting Position: Rear
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Spring Insulator Lower Bush Kit
| SPF1358-10K | 2 | | $55.00 |
Spring SeatSpring Insulator Lower Bush KitA=138mm B=33.8mm C=10mm Vehicle Application Information: - to suit IRS vehicles - raises vehicles approximately 15mm
- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: SPF1358-6K (x1)
|
Rear | Spring Insulator Lower Bush Kit
| SPF1358-6K | 2 | | $38.00 |
Spring SeatSpring Insulator Lower Bush KitA=138mm B=33.8mm C=6mm Vehicle Application Information: - to suit IRS vehicles - raises vehicles approximately 9mm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting time [min]: 60
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: SPF1358-10K (x1)
|
Rear | Spring Insulator Lower Bush Kit
| SPF1358-8K | 2 | | $47.00 |
Spring SeatSpring Insulator Lower Bush KitA=138mm B=33.8mm C=8mm Vehicle Application Information: - to suit IRS vehicles - raises vehicles approximately 12mm
- Fitting time [min]: 60
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Axle alignment required after fitting
- Part of kit: SPF1358-10K (x1)
|
Rear | Subframe Front Bush Kit
| SPF3267K | 1 | | $332.00 |
Bush, sub-frameSubframe Front Bush KitVehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Part of kit: (x)
|
Rear | Subframe Front Bush Kit
| SPF3367K | 1 | | $374.00 |
Bush, sub-frameSubframe Front Bush KitCompetition/Race Kit
IRS only Vehicle Application Information: - competition/race kit
- to suit IRS vehicles (Independent Rear Suspension)
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Link Lower Bush Kit
| SPF0513-4K | 1 | | $59.00 |
Mounting, stabiliser barSway Bar Link Lower Bush KitVehicle Application Information: - to suit vehicles with independent rear suspension
Vehicle Application Information: - to suit IRS vehicles (Independent Rear Suspension)
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Link Upper Bush Kit
| SPF1943K | 1 | | $37.00 |
Mounting, stabiliser barSway Bar Link Upper Bush KitVehicle Application Information: - to suit IRS vehicles (Independent Rear Suspension)
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount To Crossmember Bush Kit
| SPF0613-18K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount To Crossmember Bush KitVehicle Application Information: - to suit vehicles with independent rear suspension
available Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Rear
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount To Crossmember Bush Kit
| SPF0613-19K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount To Crossmember Bush KitVehicle Application Information: - to suit vehicles with independent rear suspension
available Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | Sway Bar Mount To Crossmember Bush Kit
| SPF0613-20K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount To Crossmember Bush KitVehicle Application Information: - to suit vehicles with independent rear suspension
available Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Part of kit: (x)
|