| Front | Camber Adjusting Bolt Kit
| SPF4351-12K | 1 |  | $53.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitCamber Bolt Kit 12mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
| Front | Camber Adjusting Bolt Kit
| SPF4351-15K | 1 | | $58.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitCamber Bolt Kit 15mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Position: Rear
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
| Front | Control Arm Lower Front Bush Kit
| SPF0996K | 1 | | $68.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Front
- Fitting time [min]: 150
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit
| SPF1900K | 1 | | $200.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitVehicle Application Information: - to suit vehicles from 1995-on
Vehicle Application Information: - Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit
| SPF2298K | 1 | | $102.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitVehicle Application Information: - to suit vehicles up to 1995
Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting time [min]: 180
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit - Double Offset
| SPF1902K | 1 | | $200.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Double OffsetVehicle Application Information: - to suit vehicles from 1995-on
Vehicle Application Information: - alignment correction
- Performance Kit
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit - Single Offset
| SPF1901K | 1 | | $200.00 |
 Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Single OffsetVehicle Application Information: - to suit vehicles from 1995-on
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - alignment correction
- Steering Pull Correction Kit
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Sway Bar Link
| TRC4016 | 2 |  | $39.00 |
Stabiliser Bar, suspensionSway Bar LinkVehicle Application Information: 10mm parallel Ball Joint Link
Length 63mm center to center Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: moderate
- Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 | | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF3306-19.5K | 1 | | $49.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 19.5, 20, 22, 24, 25 & 26mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF3306-20K | 1 | | $86.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 19.5, 20, 22, 24, 25 & 26mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Control Arm Bush Kit
| SPF1947K | 1 | | $215.00 |
Mounting Kit, control/trailing arm mountingControl Arm Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting time [min]: 240
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Control Arm Front Inner Outer Kit
| SPF2938K | 1 | | $179.00 |
Mounting Kit, control/trailing arm mountingControl Arm Front Inner Outer KitVehicle Application Information: - to suit vehicles with hyme joint rear control arms
Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Sway Bar Link
| TRC4021 | 2 | | $39.00 |
Stabiliser Bar, suspensionSway Bar LinkVehicle Application Information: 10mm Ball Joint Link
180 Degree opposed
Length 108mm center to center Vehicle Application Information: - Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF0613-17K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF0613-18K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Rear
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF0613-19K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 45
- Part of kit: (x)
|
| Rear | Trailing Arm Bush Kit
| SPF0823K | 1 | | $138.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Bush Kit- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
