Front | Control Arm Lower Inner Front Bush Kit
| SPF3241K | 1 | | $187.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF3242K | 1 | | $248.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Single Offset
| SPF3243K | 1 | | $542.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Single OffsetUse this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- alignment correction
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Part of kit: (x)
|