Front | Control Arm Lower Complete Alloy Assembly
| ALOY0046K | 1 | | $730.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Complete Alloy AssemblyLeft and Right Arm Kit for Standard Replacement or Repair Upgrade fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement SuperPro now has a complete alloy repair upgrade solution for the BMW E46's lower control arms. This SuperPro kit comes with LHS and RHS arms, including heavy duty M-Spec ball joints, brackets and bushes. It is a complete changeover kit for the BMW. The complete arm kit is fitted with SuperPro bushings to positively locate the rear of the arm and eliminate the unwanted flex that comes with the O.E rubber bushing.
SuperPro has the best solution for your BMW! Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Complete Alloy Assembly
| ALOY0046XK | 1 | | $748.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Complete Alloy AssemblyLeft and Right Performance Arm Kit with Caster increase fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement. SuperPro now has a complete Alloy Performance Upgrade solution for the BMW E46's lower control arms. The ALOY0046XK Caster increase kit will deliver extra caster to enhance the handling of the vehicle.Designed for greater directional stability and Improved turn in. These Arms are fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement This SuperPro kit comes with LHS and RHS arms, including heavy duty M-Spec ball joints, brackets and bushes.
SuperPro has the best solution for your BMW! Vehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit
| SPF2556K | 1 | | $180.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitVehicle Application Information: Standard Replacement Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
| SPF2558K | 1 | | $255.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetVehicle Application Information: Alignment Correction A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
| SPF2557K | 1 | | $255.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetVehicle Application Information: Alignment Correction Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Fitting time [min]: 180
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4074 | 2 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
180 Degree opposed
Length 270mm center to center Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2569-23K | 1 | | $97.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 22.5, 23, 24, 26, 27, 28, 29 & 30.8mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2569-29K | 1 | | $97.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 22.5, 23, 24, 26, 27, 28, 29 & 30.8mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Bush Kit
| SPF2421K | 1 | | $102.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitNote: Vehicles with multi-link rear suspension only.
Not suited for 318ti. - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit
| SPF2422K | 1 | | $128.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitNot suited for 318ti - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit - Offset
| SPF2668K | 1 | | $176.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - OffsetVehicle Application Information: - 2 Degrees of Camber Adjustment
Alignment Correction - Camber Adjustable
Not suited for 318ti - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential Pinion Mount Bush Kit
| SPF4330K | 1 | | $216.00 |
Bush, differential mountDifferential Pinion Mount Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 360
- Fitting Position: Rear
- Fitting time [min]: 360
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Spring Insulator Lower Bush Kit
| SPF1358-10K | 2 | | $55.00 |
Spring SeatSpring Insulator Lower Bush KitA=138mm B=33.8mm C=10mm Vehicle Application Information: - to suit IRS vehicles - raises vehicles approximately 15mm
- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: SPF1358-6K (x1)
|
Rear | Spring Insulator Lower Bush Kit
| SPF1358-6K | 2 | | $38.00 |
Spring SeatSpring Insulator Lower Bush KitA=138mm B=33.8mm C=6mm Vehicle Application Information: - to suit IRS vehicles - raises vehicles approximately 9mm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting time [min]: 60
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: SPF1358-10K (x1)
|
Rear | Spring Insulator Lower Bush Kit
| SPF1358-8K | 2 | | $47.00 |
Spring SeatSpring Insulator Lower Bush KitA=138mm B=33.8mm C=8mm Vehicle Application Information: - to suit IRS vehicles - raises vehicles approximately 12mm
- Fitting time [min]: 60
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Axle alignment required after fitting
- Part of kit: SPF1358-10K (x1)
|
Rear | Subframe Mount Bush Kit
| SPF4328K | 1 | | $377.00 |
Bush, sub-frameSubframe Mount Bush KitKit Contains All Bushings for Both Mounting Positions of the Subframe - Fitting time [min]: 360
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 360
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Sway Bar Link Upper & Lower Bush Kit
| SPF2419K | 1 | | $65.00 |
Mounting, stabiliser barSway Bar Link Upper & Lower Bush Kit- Fitting Position: Rear
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Trailing Arm Lower Front Bush Kit
| SPF2146K | 1 | | $204.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 180
- Part of kit: (x)
|