Tap to Search Parts or Vehicles

Find SuperPro Suspension Parts and Poly Bushings for your vehicle

SuperPro Fixed Offset Control Arm Bush Repair Kit for
NISSAN NAVARA NP300 2015-ON | NAVARA D23, NP300 SINGLE & KING CAB 4WD (LEAF REAR)

Back to search results Print this page Ask a Question

Part Information

Show/Hide

Mounting Kit, control/trailing arm mounting

SuperPro Fixed Offset Control Arm Bush Repair Kit

Product Specifications:

Components Per Product: 2B, 2T

This kit contains two replacement SuperPro polyurethane bushings for the SuperPro fixed offset upper control arm.
The replacement kit contains new bushings, crush tubes, a tube of grease and any other required hardware such as washers.

Note: Two kits will be required if the bushings in both arms need replacing.

This kit is used to replace the bushings in the following part numbers: TRC6540

Vehicle Application Information:

replacement bush kit to suit TRC6540 only

Axle alignment required after fitting
Fitting time [min]: 120
Fitting Position: Front
Fitting Difficulty: difficult

Downloads

Show/Hide

Product Image...

Product Image...

Product Image...

Product - Video URL...

Product - Video URL...

Product - Video URL...

Vehicle Applications

NISSAN

NAVARA 2005-2015 | NAVARA D40 2WD

NAVARA 2005-2015 | NAVARA D40 4WD

NAVARA 2015-ON | NAVARA D23, NP300 DUAL CAB 2WD (COIL REAR)

NAVARA 2015-ON | NAVARA D23, NP300 DUAL CAB 4WD (COIL REAR)

NAVARA NP300 2015-ON | NAVARA D23, NP300 SINGLE & KING CAB 2WD (LEAF REAR)

NAVARA NP300 2015-ON | NAVARA D23, NP300 SINGLE & KING CAB 4WD (LEAF REAR)

PATHFINDER 2005-2013 | PATHFINDER R51

4WD Upper Control Arms

If you lift your 4WD then you need an alignment correction solution to fix the geometry change in your 4WD’s suspension. This can be achieved with a SuperPro alignment correction bushing kit or a SuperPro Adjustable Upper Control Arm Kit. In some cases a suspension bushings will not be able to correct the alignment issues that arise when you lift you vehicle, such as droop. This is when a SuprPro Upper Control Arm Kit is the better solution, particularly with lifted IFS 4WD.

SuperPro is an innovative Australian manufacturer of automotive polyurethane suspension bushings, control arms, sway bars and other suspension components for both 4x4 and performance vehicles. SuperPro is based in Brisbane, Queensland and does all engineering and testing on site, ensuring the best quality product. Engineered to outperform, SuperPro’s specially formulated, high quality components are designed to create suspension solutions for better stability, handling and control in both on and off road applications.

footer-logos