Front | Camber Adjusting Bolt Kit
| SPF4351-15K | 1 | | $58.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitCamber Bolt Kit 15mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit standard replacement | SPF5110K | 1 | | $206.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kitstandard replacement Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset Alignment Correction | SPF5112K | 1 | | $226.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 degree caster adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - 60mm OD
- alignment correction
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit- Single Offset Alignment Correction | SPF5111K | 1 | | $216.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit- Single OffsetAlignment Correction Vehicle Application Information: - There must be at least 30mm of clearance between the droop stop and the chassis at ride height to avoid any damage to the arms.
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by re-positioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- 60mm OD
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement | TRC4085 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkStandard Replacement 12mm Ball Joint Link
180 Degree opposed
Length 71mm center to center - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link Standard Replacement | TRC4086 | 2 | | $39.00 |
Stabiliser Bar, suspensionSway Bar LinkStandard Replacement 10mm Ball Joint Link to 10.5mm ID Bush
90 Degree opposed
Length 107mm center to center - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025A | 1 | | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable 10mm Ball Joint Adjustable Link
Minimum Length 85 mm - Maximum Length 100 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Part of kit: (x)
|