Front | Control Arm Lower-Front Bush Kit
| SPF2100K | 1 | | $249.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush KitPlease check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush. Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3776K Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - 66mm OD
- standard replacement
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower-Front Bush Kit - Double Offset
| SPF2102K | 1 | | $249.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush Kit - Double OffsetVehicle Application Information: - adds +/- 1.5 degrees camber
Please check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush. Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3809K.
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- 66mm OD
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Front Bush Kit - Single Offset
| SPF2101K | 1 | | $249.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush Kit - Single OffsetVehicle Application Information: - 1 degree caster adjustment available
Please check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush. Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3808K. Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved.Vehicle Application Information: - Steering Pull Correction Kit
- 66mm OD
- alignment correction
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Front
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4019L | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
180 Degree opposed
Length 242mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4019R | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
180 Degree opposed
Length 242mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12160 | 1 | | $226.00 |
Link/Coupling Rod, stabiliser barSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 210 mm - Maximum Length 260 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Part of kit: (x)
|