Front and Rear | Radius Arms & Panhard Rods Bush Kit
| KIT059K | 1 | | $775.00 |
Mounting, control/trailing armRadius Arms & Panhard Rods Bush KitVehicle Application Information: - to suit vehicles up to 1989
Kit Contains SPF0396K x 1, SPF0397K x 1, SPF0398K x 1, SPF0399K x 4, SPF0444K x 1 As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of these vehicles. Having a solid axle, front and rear, the caster arms and trailing arm bushes stabilise the forward and aft movement of both axles. As these bushings wear they impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking. The panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking. SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling. You need a SuperPro Complete Bush Kit if: - The rubber bushings start to show signs of wear
- Bigger Wheels & Tyres are fitted
- The vehicles ride height is changed
- The vehicle carries more loads
Kit contains: - Front Radius Arm To Diff Mount Bush Kit
- Front Radius Arm To Chassis Mount Bush Kit
- Front and Rear Panhard Rod Bush Kit
- Fitting Position: Front and Rear
- Fitting time [min]: 600
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front and Rear | Radius Arms & Panhard Rods Bush Kit - Extra Offset
| KIT060ADJXK | 1 | | $841.00 |
Mounting, control/trailing armRadius Arms & Panhard Rods Bush Kit - Extra OffsetAs the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of these vehicles. Having a solid axle, front and rear, the caster arms and trailing arm bushes stabilise the forward and aft movement of both axles. As these bushings wear they impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking. The panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking. SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling. You need a SuperPro Complete Bush Kit if: - The rubber bushings start to show signs of wear
- Bigger Wheels & Tyres are fitted
- The vehicles ride height is changed
- The vehicle carries more loads
Kit contains: - Front Radius Arm To Diff Mount Bush Kit - Offset
- Front Radius Arm To Chassis Mount Bush Kit
- Front and Rear Panhard Rod Bush Kit to Suit all Models
- Rear Trailing Arm Upper and Lower Bush Kit
Vehicle Application Information: - to suit 75mm or higher lifted vehicles
- Axle alignment required after fitting
- Fitting time [min]: 600
- Fitting Position: Front and Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front and Rear | Radius Arms & Panhard Rods Bush Kit - Standard Replacement
| KIT060K | 1 | | $750.00 |
Mounting, control/trailing armRadius Arms & Panhard Rods Bush Kit - Standard ReplacementAs the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of these vehicles. Having a solid axle, front and rear, the caster arms and trailing arm bushes stabilise the forward and aft movement of both axles. As these bushings wear they impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking. The panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking. SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling. You need a SuperPro Complete Bush Kit if: - The rubber bushings start to show signs of wear
- Bigger Wheels & Tyres are fitted
- The vehicles ride height is changed
- The vehicle carries more loads
Kit contains: - Front Radius Arm To Diff Mount Bush Kit
- Front Radius Arm To Chassis Mount Bush Kit
- Front and Rear Panhard Rod Bush Kit to Suit all Models
- Rear Trailing Arm Upper and Lower Bush Kit
Vehicle Application Information: - to suit standard height vehicle
- Fitting time [min]: 600
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front and Rear
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit - Lower
| SPF4998-10K | 2 | | $60.00 |
Spring SeatCoil Spring Spacer Bush Kit - LowerA=160.50mm B=82mm C=10mm Vehicle Application Information: - raises vehicle approximately 10mm
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit - Upper
| SPF1734-5K | 2 | | $41.00 |
Spring SeatCoil Spring Spacer Bush Kit - UpperA=170mm B=115mm C=5mm D=10mm E=125mm Spring Spacer will reform to shape of the coil Vehicle Application Information: - raises vehicle approximately 5mm
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit - Upper
| SPF1734K | 2 | | $71.00 |
Spring SeatCoil Spring Spacer Bush Kit - UpperA=170mm B=115mm C=15mm D=10mm E=125mm Spring Spacer will reform to shape of the coil Vehicle Application Information: - raises vehicle approximately 15mm
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit - Upper
| SPF2364-30K | 2 | | $124.00 |
Spring SeatCoil Spring Spacer Bush Kit - UpperA=170mm B=69-116mm C=30mm D=20mm E=123mm
Helical Spring Seat & Tapered ID Vehicle Application Information: - raises vehicle approximately 30mm
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Panhard Rod Bush Kit
| SPF0398K | 1 | | $83.00 |
Bush, panhard rodPanhard Rod Bush Kit- Fitting time [min]: 90
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 90
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Radius Arm Assembly Kit
| TRC1215 | 1 | | $1480.00 |
Control/Trailing Arm, wheel suspensionRadius Arm Assembly KitVehicle Application Information: - Caster correction arm
- to suit vehicles with a 2-3" lift
Left and right arms for lifted vehicles with caster correction. Raising a vehicle washes off caster and the effects of decreased caster are a loss of straight line stability, vague steering at higher speeds and can cause caster shimmy. The SuperPro Caster Correction Arm Kit solves the issues with 'built in' caster correction in the design, with nearly 4 Degrees for a 50mm lift and 2.5 Degrees for a 75mm lift.
- Axle alignment required after fitting
- Fitting Difficulty: moderate
- Fitting time [min]: 180
- Fitting Position: Front
- Part of kit: (x)
|
Front | Radius Arm To Diff Mount Bush Kit - Extra Offset
| SPF1721XK | 1 | | $289.00 |
Bush, radius armRadius Arm To Diff Mount Bush Kit - Extra OffsetAllows up to 4 degrees caster increase Vehicle Application Information: - alignment correction
- to suit 75mm or higher lifted vehicles
- extra offset for high lift vehicles to increase caster settings
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Radius Arm To Diff Mount Bush Kit - Offset
| SPF1721K | 1 | | $284.00 |
Bush, radius armRadius Arm To Diff Mount Bush Kit - OffsetAlignment Correction
Allows up to 2 degrees Caster increase Vehicle Application Information: - alignment correction
- to suit 50mm raised vehicles
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 240
- Part of kit: (x)
|
Front | Radius Arm To Chassis Bush Kit - Setback
| SPF3467K | 1 | | $116.00 |
Bush, radius armRadius Arm To Chassis Bush Kit - SetbackVehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Radius Arm To Chassis Mount Bush Kit
| SPF0397K | 1 | | $77.00 |
Bush, radius armRadius Arm To Chassis Mount Bush Kit- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Radius Arm To Diff Mount Bush Kit
| SPF0396K | 1 | | $188.00 |
Bush, radius armRadius Arm To Diff Mount Bush KitVehicle Application Information: - Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Radius Arm To Diff Mount Bush Kit – Hybrid Version
| TRC0396 | 1 | | $353.00 |
Bush, radius armRadius Arm To Diff Mount Bush Kit – Hybrid Versiondelivers superior articulation and durability Vehicle Application Information: - to suit standard height vehicles and/or lifted vehicles fitted with aftermarket caster increase arms
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Shock Absorber Upper & Lower Bush Kit
| SPF0740K | 1 | | $40.00 |
Bush, shock absorberShock Absorber Upper & Lower Bush Kit- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Fitting Difficulty: moderate
- Fitting Position: Front and Rear
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF2092BK | 1 | | $32.00 |
Bush, shock absorberSway Bar Link Bush Kit- Fitting time [min]: 45
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Position: Front
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF0626-20K | 1 | | $36.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 18, 20, 21, 22, 23, 24, 25 & 27mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF0626-22K | 1 | | $36.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 15, 18, 20, 21, 22, 23, 24, 25 & 27mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | 18mm Heavy Duty Non Adjustable Sway Bar
| SNR8 | 1 | | |
Stabiliser Bar, suspension18mm Heavy Duty Non Adjustable Sway BarSelby Classic Range by Roll Control. Finished in Black with Black SuperPro Bushings - Fitting Difficulty: easy
- Fitting time [min]: 90
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Coil Spring Spacer Bush Kit
| SPF1736-15K | 2 | | $85.00 |
Spring SeatCoil Spring Spacer Bush KitA=180mm B=120mm C=15mm D=15mm E=140mm Vehicle Application Information: - raises vehicle approximately 15mm
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Position: Rear
- Part of kit: SPF1736-5K (x1)
|
Rear | Coil Spring Spacer Bush Kit
| SPF1736-30K | 2 | | $142.00 |
Spring SeatCoil Spring Spacer Bush KitA=180mm B=120mm C=30mm D=15mm E=140mm Vehicle Application Information: - raises vehicle approximately 30mm
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: SPF1736-5K (x1)
|
Rear | Coil Spring Spacer Bush Kit
| SPF1736-5K | 2 | | $42.00 |
Spring SeatCoil Spring Spacer Bush KitA=180mm B=120mm C=5mm D=15mm E=140mm Vehicle Application Information: - raises vehicle approximately 5mm
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Position: Rear
- Part of kit: SPF1736-30K (x1)
|
Rear | Panhard Rod Bush Kit
| SPF0398K | 1 | | $83.00 |
Bush, panhard rodPanhard Rod Bush KitVehicle Application Information: - to suit vehicles from 1989-on
- Fitting time [min]: 90
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 90
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Panhard Rod Bush Kit
| SPF0444K | 1 | | $110.00 |
Bush, panhard rodPanhard Rod Bush KitVehicle Application Information: - to suit vehicles up to 1989
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Shock Absorber Lower Bush Kit
| SPF2755LK | 1 | | $28.00 |
Bush, shock absorberShock Absorber Lower Bush Kit- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Position: Front
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Link Bush Kit
| SPF2092B-4K | 1 | | $20.00 |
Mounting, stabiliser barSway Bar Link Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF0627-17K | 1 | | $40.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 14, 15, 17, 18, 20, 21, 22 & 24mm Vehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 45
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF0627-18K | 1 | | $40.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 14, 15, 17, 18, 20, 21, 22 & 24mm Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | Trailing Arm Lower Bush Kit
| SPF0399K | 2 | | $102.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush Kit- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|