Front | Control Arm Assembly Kit Left and Right Arms for Standard Replacement and Repair Upgrade | TRC1019 | 1 | | $513.00 |
Control/Trailing Arm, wheel suspensionControl Arm Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade Standard Replacement
Includes left and right arms, ball joints and all bushings These arms utilise SuperPro bushings and are manufactured from high strength steel and come complete with a heavy duty ball joint. By eliminating the O.E style rubber bushings, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit
| SPF3776K | 1 | | $200.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - 70mm OD
- standard replacement
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit - Double Offset
| SPF3809-90K | 1 | | $198.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Double OffsetVehicle Application Information: - adds +/- 1.5 degrees camber
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Alignment Correction. Caster Adjustment
- 70mm OD
- Heavy Duty
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit - Double Offset
| SPF3809K | 1 | | $200.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Double OffsetVehicle Application Information: - adds +/- 1.5 degrees camber
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Alignment Correction. Caster Adjustment
- 70mm OD
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Rear Bush Kit - Single Offset
| SPF3808K | 1 | | $200.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Single OffsetVehicle Application Information: - 1 degree caster adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- 70mm OD
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Front Bush Kit
| SPF3777K | 1 | | $113.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF2992K | 1 | | $94.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush Kit- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link Cut To Length Link | TRC4007 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkCut To Length Link 12mm Ball Joint Link
Minimum Length 90mm - Maximum Length 320mm Vehicle Application Information: - Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12200 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Axle alignment required after fitting
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2878-27K | 1 | | $62.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 27 & 30mm Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2878-30K | 1 | | $62.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 27 & 30mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Spring Front Eye Bush Kit
| SPF3779K | 1 | | $189.00 |
Bushing, leaf springSpring Front Eye Bush Kit- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Spring Rear Eye & Shackle Bush Kit
| SPF3780K | 1 | | $126.00 |
Bushing, leaf springSpring Rear Eye & Shackle Bush Kit- Fitting time [min]: 90
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1225 | 1 | | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|