| Front | Camber Adjusting Bolt Kit
| SPF4351-12K | 1 |  | $53.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitCamber Bolt Kit 12mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Front Bush Kit
| SPF1779K | 1 | | $99.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush KitVehicle Application Information: - Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Rear Bush Kit
| SPF1780K | 1 | | $100.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Rear Bush Kit - Double Offset
| SPF1880AK | 1 | | $256.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Double OffsetVehicle Application Information: - 1 degree caster adjustment available
NOTE: RHS caster cannot be reduced as control arm will foul on chassis A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Inner Rear Bush Kit - Single Offset
| SPF1880K | 1 | | $133.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Single OffsetUse this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - alignment correction
- Steering Pull Correction Kit
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Sway Bar Link
| TRC4007 | 2 |  | $45.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
Minimum Length 90mm - Maximum Length 320mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Part of kit: (x)
|
| Front | Sway Bar Link
| TRC4019L | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
180 Degree opposed
Length 242mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Front | Sway Bar Link
| TRC4019R | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link12mm Ball Joint Link
180 Degree opposed
Length 242mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12160 | 1 | | $226.00 |
Link/Coupling Rod, stabiliser barSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 210 mm - Maximum Length 260 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1826-20K | 1 | | $73.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 22mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF1826-22K | 1 | | $73.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 & 22mm Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
