Front | Camber Adjusting Bolt Kit
| SPF4351-14K | 1 | | $58.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitCamber Bolt Kit 14mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Control Arm Assembly Kit
| TRC1017 | 1 | | $637.00 |
Control/Trailing Arm, wheel suspensionControl Arm Assembly KitStandard Replacement.
Includes left and right arms, rear brackets, ball joints and all bushings These arms utilise the SuperPro bushings and are manufactured from a high strength material and come complete with a heavy duty ball joint. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Inner Front Bush Kit
| SPF4432K | 1 | | $97.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush Kit- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF3585K | 1 | | $165.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitThese SuperPro bushings help eliminate the negative effects on handling and braking that come from voided, soft or worn rubber bushes in this position.
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing be replaced at the same time. Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Double Offset
| SPF3587K | 1 | | $165.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Double OffsetVehicle Application Information: - 1 degree caster adjustment available
These SuperPro bushings help eliminate the negative effects on handling and braking that come from voided, soft or worn rubber bushes in this position. Use this kit to enhance the steering feel of the vehicle. Supplied with two offset bushes, these kits increase the caster or setback by repositioning the ball joints slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics. Follow the installation instructions and the vehicle will handle and steer with way more precision!
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing be replaced at the same time. Vehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Single Offset
| SPF3586K | 1 | | $165.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Single OffsetThese bushings help eliminate the negative effects on handling and braking that come from voided, soft or worn rubber bushes in this position. Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved.
SuperPro Tip - If this bushing is showing signs of wear and requires replacement, the principle reason is a worn Lower Control Arm Front Bushing. SuperPro strongly advises that this bushing be replaced at the same time. Vehicle Application Information: - Steering Pull Correction Kit
- alignment correction
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Steering Rack Mount Bush Kit
| SPF5245K | 1 | | $64.00 |
Bush, steering shaftSteering Rack Mount Bush Kit- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower Outer Bush Kit
| SPF3582K | 1 | | $106.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Outer Bush KitVehicle Application Information: - bush located in hub assembly
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Outer Bush Kit
| SPF3581K | 1 | | $100.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Outer Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Toe Arm Bolt Kit
| TRC0038 | 1 | | $140.00 |
Bolt, axle strutToe Arm Bolt Kit- Fitting Position: Rear
- Fitting time [min]: 60
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|