Front | Control Arm Upper Inner Bush Kit
| SPF2014-95K | 1 | | $301.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper Inner Bush Kit
| SPF2014K | 1 | | $250.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Shock Absorber Upper Bush Kit
| SPF2244K | 1 | | $45.00 |
Bush, shock absorberShock Absorber Upper Bush KitA=9.5mm B=15mm C=12.5mm D=15.5mm E=34mm - Fitting Position: Front
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF2484K | 1 | | $107.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1085 | 1 | | $212.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 185 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF0971-26K | 1 | | $48.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 21, 24, 25.5, 26, 27, 28 & 29mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF0971-27K | 1 | | $48.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 21, 24, 25.5, 26, 27, 28 & 29mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | 18mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0027RZ-18 | 1 | | $523.00 |
Stabiliser Bar, suspension18mm Heavy Duty 3 Position Blade Adjustable Sway BarSuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD. The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension. If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
Vehicle Application Information: - can't be used with Airbags fitted in the rear
- does not suit vehicles with diff mounted proportioning valve
- Fitting Difficulty: moderate
- Fitting time [min]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Greasable Pin and Bush Kit - Front Eye
| SPF4460K | 1 | | $188.00 |
Bushing, leaf springGreasable Pin and Bush Kit - Front Eye- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 120
- Part of kit: (x)
|
Rear | Greasable Shackle and Bush Kit
| KIT070SK | 1 | | $329.00 |
Bushing, leaf spring hangerGreasable Shackle and Bush KitContains Greasable Shackles and Fixed Pins with all SuperPro Bushings The Shackles and Fixed Pins are often overlooked when upgrading the suspension of a 4WD. Original shackles and fixed pins corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle. Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. By fitting the complete package of Greasable Shackles, Fixed Pins and Bush Kit the rear end of any 4WD will handle just about anything that is throw at it!
- Fitting Difficulty: easy
- Fitting time [min]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Leaf Spring Bush Kit
| KIT070HK | 1 | | $157.00 |
Bushing, leaf springLeaf Spring Bush KitKit contains: 1 x SPF0972HK, 1 x SPF2231-8HK These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! Vehicle Application Information: - H Kit for Severe Conditions or Heavy Duty applications
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Leaf Spring Bush Kit
| KIT070K | 1 | | $124.00 |
Bushing, leaf springLeaf Spring Bush KitKit contains: 1 x SPF0972K, 1 x SPF2231-8K These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! - Fitting Position: Rear
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Shock Absorber Upper & Lower Bush Kit
| SPF2178-16K | 2 | | $28.00 |
Bush, shock absorberShock Absorber Upper & Lower Bush KitA=16mm B=24.5mm C=24mm D=36mm E=30mm Double Tapered Bushing - Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 90
- Part of kit: (x)
|
Rear | Spring Front Eye Bush Kit
| SPF0972HK | 1 | | $89.00 |
Bushing, leaf springSpring Front Eye Bush KitVehicle Application Information: - Tube 19 x 14.5 x 68.5
- Heavy Duty
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Spring Front Eye Bush Kit
| SPF0972K | 1 | | $72.00 |
Bushing, leaf springSpring Front Eye Bush KitVehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Spring Rear Bush Kit All
| SPF2231-8K | 1 | | $66.00 |
Bushing, leaf springSpring Rear Bush Kit All- Fitting Position: Rear
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Position: Front
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Part of kit: (x)
|