| Front | Control Arm Lower Rear Bush Kit
| SPF3776K | 1 |  | $200.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - 70mm OD
- standard replacement
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit - Double Offset
| SPF3809-90K | 1 | | $198.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Double OffsetVehicle Application Information: - adds +/- 1.5 degrees camber
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Alignment Correction. Caster Adjustment
- 70mm OD
- Heavy Duty
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit - Double Offset
| SPF3809K | 1 | | $200.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Double OffsetVehicle Application Information: - adds +/- 1.5 degrees camber
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Alignment Correction. Caster Adjustment
- 70mm OD
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower Rear Bush Kit - Single Offset
| SPF3808K | 1 | | $200.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush Kit - Single OffsetVehicle Application Information: - 1 degree caster adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- 70mm OD
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
| Front | Control Arm Lower-Front Bush Kit
| SPF4383K | 1 | | $80.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush Kit- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Axle alignment required after fitting
- Part of kit: (x)
|
