| Front and Rear | Vehicle Master Kit
| KIT300K | 1 |  | $1445.00 |
Mounting, control/trailing armVehicle Master KitThis kit has all the essential bushes needed to effectively increase the handling performance of a modified vehicle.
Ideally suited as an entry level kit for a modified vehicle with bigger wheels or tyres, brakes and general suspension upgrades.Kit contains: - SPF5495K - Front Control Arm Upper-Inner Bush Kit
- SPF5522K - Front Control Arm Lower-Front Bush Kit
- SPF3278K - Front Torque Arm Lower Rear Bush Kit
- SPF3285K - Rear Trailing Arm Upper Bush Kit
- SPF3286K - Rear Trailing Arm Lower Bush Kit
- SPF5508K - Rear Panhard Bush Kit
- Fitting Position: Front and Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 500
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front and Rear | Vehicle Upgrade Kit
| KIT301K | 1 | | $2758.00 |
Mounting, control/trailing armVehicle Upgrade KitThis kit has all the essential parts needed to effectively increase and adjust the handling performance of a modified vehicle.
Ideally suited as an upgrade kit for a lifted vehicle with bigger wheels or tyres, brakes and general suspension upgrades.Kit contains: - TRC6710 - Front Upper Fixed Offset Control Arm Kit
- SPF5522K - Front Control Arm Lower-Front Bush Kit
- SPF3278K - Front Control Arm Lower-Rear Bush Kit
- TRC1138 - Rear Adjustable Upper Trailing Arm Kit
- TRC1139 - Rear Adjustable Lower Trailing Arm Kit
- TRC1140 - Rear Adjustable Heavy Duty Panhard Rod
- TRC1285 - Rear Adjustable Heavy Duty Sway Bar Link Kit
- Fitting Difficulty: difficult
- Fitting time [min]: 500
- Axle alignment required after fitting
- Fitting Position: Front and Rear
- Part of kit: (x)
|
| Front | 42mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0116FZ-42 | 1 |  | $967.00 |
Stabiliser Bar, suspension42mm Heavy Duty 2 Position Blade Adjustable Sway BarVehicle Application Information: - to suit vehicles without KDSS
If you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer!
By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar.
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bushing
| SPF3281-5K | 1 |  | $52.00 |
Spacer Bushing, leaf spring hangerCoil Spring Spacer Bushing5mm thick Spacer Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 90
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower Front Bush Kit
| SPF5522K | 1 | | $252.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 240
- Part of kit: KIT301K (x1)
|
| Front | Control Arm Lower Rear Bush Kit
| SPF3278K | 1 | | $314.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Rear Bush KitVehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: KIT301K (x1)
|
| Front | Control Arm Replacement Ball Joint for Fixed Offset Control Arm
| KIT6710RK | 1 | | $104.00 |
Ball Joint Repair KitControl Arm Replacement Ball Joint for Fixed Offset Control ArmThis kit contains one replacement heavy-duty high-articulation ball joint for the SuperPro fixed offset Upper control arm. The kit contains a brand-new ball joint, which also includes a new dust boot, circlip, nut and any other required installation hardware.
Notes: If both ball joints need replacing, two kits will be required.
This kit is used to replace the ball joint in the following part numbers: TRC6710 Vehicle Application Information: - replacement Ball Joint to suit TRC6710 only
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: TRC6710 (x2)
|
| Front | Control Arm Replacement Bush Kit for Fixed Offset Control Arm
| KIT6710K | 1 | | $66.00 |
Mounting Kit, control/trailing arm mountingControl Arm Replacement Bush Kit for Fixed Offset Control ArmThis kit contains two replacement SuperPro polyurethane bushings for the SuperPro fixed offset upper control arm.
The replacement kit contains new bushings, crush tubes, a tube of grease and any other required hardware such as washers.
Note: Two kits will be required if the bushings in both arms need replacing.
This kit is used to replace the bushings in the following part numbers: TRC6710
Vehicle Application Information: - replacement bush kit to suit TRC6710 only
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Part of kit: TRC6710 (x2)
|
| Front | Control Arm Upper Complete Assembly - Fixed Offset
| TRC6710 | 1 | | $764.00 |
 Control/Trailing Arm, wheel suspensionControl Arm Upper Complete Assembly - Fixed OffsetVehicle Application Information: - providing an increase of 1.5 degrees of caster and 1.5 degrees of negative camber over the OE UCA
Fixed Offset Arms fitted with Uprated Ball Joints and SuperPro Bushes to reduce Arm movement Fixed offset upper control arms with heavy-duty, high-articulation ball joints and SuperPro polyurethane bushings for 1 to 3 inch lifted vehicles.The SuperPro fixed offset upper control arm (UCA) is a high-performance aftermarket component designed to enhance the wheel alignment of lifted 4x4 vehicles, resulting in reduced tire wear and improved overall performance. This UCA is constructed using high-strength steel forgings and tube steel, making it durable and reliable for heavy-duty use. The components are robot-welded, ensuring consistent and precise manufacturing standards.
The SuperPro fixed offset UCA features a heavy-duty high-articulation ball joint that enables the suspension to have greater articulation without binding, allowing for improved control and handling over rough terrain.
This UCA also includes SuperPro’s renowned polyurethane bushings, which offer superior resilience and durability compared to traditional rubber bushings. The polyurethane material is resistant to abrasion, wear, and chemicals, making it ideal for harsh off-road environments.
Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: KIT6710RK (x1)
|
| Front | Control Arm Upper Inner Bush Kit
| SPF5495K | 1 | | $410.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Upper Inner Bush Kit - Alignment Correction
| SPF5495XK | 1 | | $416.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - Alignment CorrectionControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
| Front | ReadyStrut Top Caps
| RS014 | 2 | | $102.00 |
Suspension Strut MountingReadyStrut Top CapsStrut Cap, Spring Seat, Nuts & Washers - Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Shock Absorber Lower Bush Mount Kit
| SPF5446PK | 1 | | $172.00 |
Bush, shock absorberShock Absorber Lower Bush Mount KitVehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 90
- Part of kit: (x)
|
| Front | Shock Absorber Upper Bush Mount Kit
| SPF5488K | 1 | | $36.00 |
Bush, shock absorberShock Absorber Upper Bush Mount Kit- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Part of kit: (x)
|
| Rear | 26mm Heavy Duty 2 Position Blade Adjustable Sway Bar and Link Kit
| RC0116RZ-26 | 1 | | $518.00 |
Stabiliser Bar, suspension26mm Heavy Duty 2 Position Blade Adjustable Sway Bar and Link KitVehicle Application Information: - to suit vehicles without KDSS
If you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer!
By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar.
- Fitting time [min]: 120
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Rear | Panhard Rod - Adjustable
| TRC1140 | 1 | | $285.00 |
Mounting, panhard rodPanhard Rod - AdjustableSuperPro Adjustable Panhard Rod - a must-have for avid 4x4 enthusiasts looking for a heavy-duty solution to reset axle location and rectify wheel alignment on raised vehicles.
Designed in Australia and fitted with SuperPro bushings, this rod minimizes NVH and maximizes longevity.
It's worth noting that it's off-car adjustable, ensuring ease of use.
Made with heavy-duty DOM steel tube and forged ends for added strength, this adjustable panhard rod features SuperPro bushings, providing quiet and maintenance-free operation. Vehicle Application Information: - Heavy duty off-car adjustable
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: KIT301K (x1)
|
| Rear | Panhard Rod Bush Kit
| SPF5508K | 1 | | $62.00 |
Bush, panhard rodPanhard Rod Bush Kit- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Shock Absorber Upper Bush Mount Kit
| SPF5493K | 1 | | $78.00 |
Bush, shock absorberShock Absorber Upper Bush Mount KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 150
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1285 | 1 | | $212.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: - to suit vehicles with a 2-3" lift
- to suit vehicles without KDSS
12mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 185 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 90
- Part of kit: KIT301K (x1)
|
| Rear | Sway Bar Mount Bush Kit
| SPF5504-21K | 1 | | $45.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: available Sizes 21, 25 & 27mm Vehicle Application Information: - Fitting time [min]: 30
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Trailing Arm - Lower Adjustable Kit
| TRC1139 | 1 | | $650.00 |
 Control/Trailing Arm, wheel suspensionTrailing Arm - Lower Adjustable KitThis trailing arm kit for the 200 Series is designed to correct the pinion angle on a lifted vehicle. Offering an adjustable solution, while improving both on- and offroad performance.
Designed as an upgrade and not just as a repair solution! Supplied as a complete kit and fully assembled with SuperPro bushings.
We have developed this arm kit to be by far the best choice on the market. Fitted with SuperPro bushes, these suspension arms have been optimised for longevity, durability and performance without any unwanted NVH.
SuperPro Control & Trailing Arms are perfectly suited as an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
Fully developed by our Australian based R&D team.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle. Vehicle Application Information: - Off-car adjustable for pinion angle correction for Off-Road use
- Fitting Position: Rear
- Fitting time [min]: 60
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: KIT301K (x1)
|
| Rear | Trailing Arm - Upper Adjustable Kit
| TRC1138 | 1 | | $590.00 |
Control/Trailing Arm, wheel suspensionTrailing Arm - Upper Adjustable KitVehicle Application Information: - Off-car adjustable for pinion angle correction for Off-Road use
- Fitting time [min]: 60
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: KIT301K (x1)
|
| Rear | Trailing Arm Lower Bush Kit
| SPF3286K | 1 | | $305.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Rear | Trailing Arm Upper Bush Kit
| SPF3285K | 1 | | $235.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Upper Bush KitVehicle Application Information: - Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
