Front | 30mm Heavy Duty Non Adjustable Sway Bar
| RC0056F-30 | 1 | | $437.00 |
Stabiliser Bar, suspension30mm Heavy Duty Non Adjustable Sway Bar- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Bush Kit
| SPF4186K | 1 | | $110.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Bush KitVehicle Application Information: - to suit vehicles from 2000-2004
Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 90
- Part of kit: (x)
|
Front | Control Arm Lower Bush Kit - Offset
| SPF4186XK | 1 | | $130.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Bush Kit - OffsetVehicle Application Information: - to suit vehicles from 2000-2004
- +/- 1 Degree Camber Adjustment available
Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 90
- Fitting Position: Front
- Fitting time [min]: 90
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF4087K | 1 | | $97.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - to suit vehicles with 50mm OD rack housing
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF3087K | 1 | | $271.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush KitVehicle Application Information: - to suit vehicles from 1997-2000
Vehicle Application Information: - 60mm OD
- standard replacement
- Axle alignment required after fitting
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF4084K | 1 | | $191.00 |
Bush, strut mountStrut Bar To Chassis Mount Bush KitVehicle Application Information: - to suit vehicles from 2000-2004
Vehicle Application Information: - OD 65mm
- standard replacement
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 90
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 90
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit - Double Offset
| SPF3089K | 1 | | $237.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Double OffsetVehicle Application Information: - to suit vehicles from 1997-2000
- 1.5 to 2 Degrees Caster change
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - 60mm OD
- alignment correction
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit - Double Offset
| SPF4086K | 1 | | $191.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Double OffsetVehicle Application Information: - 1 degree caster adjustment available
- to suit vehicles from 2000-2004
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- OD 65mm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 90
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit - Single Offset
| SPF3088K | 1 | | $237.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Single OffsetVehicle Application Information: - to suit vehicles from 1997-2000
- +/- 1 Degree Camber & 1 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - 60mm OD
- Steering Pull Correction Kit
- alignment correction
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit - Single Offset
| SPF4085K | 1 | | $191.00 |
Bush, strut mountStrut Bar To Chassis Mount Bush Kit - Single OffsetVehicle Application Information: - 1 degree caster adjustment available
- to suit vehicles from 2000-2004
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- OD 65mm
- alignment correction
- Fitting time [min]: 90
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF4441-29K | 1 | | $64.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: available sizes 29 & 31mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF4441-31K | 1 | | $64.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - to suit Roll Control sway bar
available sizes 29 & 31mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | 18mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0056RZ-18 | 1 | | $332.00 |
Stabiliser Bar, suspension18mm Heavy Duty 3 Position Blade Adjustable Sway Bar- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Bush Kit
| SPF3036K | 1 | | $163.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Bush Kit - Double Offset
| SPF3037K | 1 | | $185.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush Kit - Double OffsetVehicle Application Information: - 0.6 Degrees of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit
| SPF3043K | 1 | | $243.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitVehicle Application Information: - Fitting time [min]: 240
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit - Double Offset
| SPF3044K | 1 | | $232.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - Double OffsetVehicle Application Information: - 0.6 Degrees of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- camber adjustable
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential Pinion Mount Bush Kit
| SPF2769K | 1 | | $125.00 |
Bush, differential mountDifferential Pinion Mount Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2817-14K | 1 | | $50.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: available Sizes 14, 15, 17, 18 & 19mm Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Toe Control Arm Inner Bush Kit
| SPF2786K | 1 | | $93.00 |
Mounting, control/trailing armToe Control Arm Inner Bush KitVehicle Application Information: - outer bush is ball joint style
- to suit vehicles from 1997-2000
Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Toe Control Arm Inner Bush Kit
| SPF3034K | 1 | | $178.00 |
Mounting, control/trailing armToe Control Arm Inner Bush KitVehicle Application Information: - outer bush is ball joint style
- to suit vehicles from 1997-2000
Vehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 180
- Part of kit: (x)
|
Rear | Trailing Arm Front Bush Kit
| SPF2784K | 1 | | $72.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Front Bush KitVehicle Application Information: - to suit vehicles from 1997-2000
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Trailing Arm Rear Bush Kit
| SPF2785K | 1 | | $130.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Rear Bush KitVehicle Application Information: - bush located in hub assembly
- to suit vehicles from 1997-2000
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|