| Front | Strut Bar To Chassis Mount Bush Kit
| SPF1202K | 1 |  | $129.00 |
Bush, strut mountStrut Bar To Chassis Mount Bush KitVehicle Application Information: - standard replacement
- 69.5mm long crush tube, bracket width 40mm
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit
| SPF1831K | 1 | | $190.00 |
Bush, strut mountStrut Bar To Chassis Mount Bush KitVehicle Application Information: Vehicle Application Information: - standard replacement
- 83mm long tube, bracket 54mm wide
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit - Double Offset
| SPF1202AK | 1 | | $190.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- 69.5mm long crush tube, bracket width 40mm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Front
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit - Double Offset
| SPF1831AK | 1 | | $153.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Double OffsetVehicle Application Information: - to suit GTR
- +/- 1 Degree Camber & 1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- 83mm long tube, bracket 54mm wide
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Sway Bar Link
| TRC4006 | 2 |  | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
60mm center to center Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1035 | 1 | | $154.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 65 mm - Maximum Length 70 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits - Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | 20mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0010RZ-20 | 1 | | $371.00 |
Stabiliser Bar, suspension20mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | 22mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0010RZ-22 | 1 | | $389.00 |
Stabiliser Bar, suspension22mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0010RZ-24 | 1 | | $441.00 |
Stabiliser Bar, suspension24mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting Position: Rear
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Part of kit: (x)
|
