Front and Rear | Performance Sway Bar Upgrade Kit 26mm Front 2 Point Adjustable and 24mm Rear 3 Point Adjustable Sway Bars | RCSTI099KIT | 1 | | $1110.00 |
Stabiliser Bar, suspensionPerformance Sway Bar Upgrade Kit26mm Front 2 Point Adjustable and 24mm Rear 3 Point Adjustable Sway Bars Kit includes Front and Rear Sway Bars, Heavy Duty High Articulation Sway Bar Links and Mount Brace Kit The SuperPro Roll Control two position adjustable front sway bar is 26mm solid and the rear is a three position adjustable 24mm solid sway bar.
Add in the SuperPro Adjustable sway bar links to: - eliminate sway bar link flex
- maintain neutral sway bar positioning
- maximize all positions on the adjustable Sway Bars
All this adds up to a vehicle that is a balanced upgrade by assisting tyre grip and this becomes an ultimate handling package upgrade. From all our testing, this what we recommend as a good starting point: - Stage one is to set both bars to the hardest setting and is ideally suited to a vehicle with standard suspension, wheels and tyres.
- Stage two is to set the front to the soft setting and the rear to the hardest setting and is ideally to a vehicle with lowered springs, or with larger, wider wheels and tyres.
- Stage three is to set both bars to the soft setting and is ideally suited to a vehicle with fitted with a coil over kit or sports suspension pack.
This SuperPro Roll Control Sway Bar Kit will make the suspension system and tyres perform better, making the car more responsive while delivering more grip.
It is the best dollar for dollar handling improvement you can make! - Axle alignment required after fitting
- Fitting Position: Front and Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | 26mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0099FZ-26 | 1 | | $395.00 |
Stabiliser Bar, suspension26mm Heavy Duty 2 Position Blade Adjustable Sway Bar
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Alloy Lower Control Arm Assembly
| ALOY0016K | 1 | | $1098.00 |
Control/Trailing Arm, wheel suspensionAlloy Lower Control Arm AssemblyLeft and Right Performance Arm Kit.
Standard replacement. Corrosion resistant. SuperPro Roll Control WRX Supaloy Front Lower Control Arms increase the handling of your WRX to better than that of the STI. - Alloy light-weight and stronger than original steel – less unsprung weight.
- SuperPro bushings for increased tyre contact patch control, minimal NVH with maximum service life and better handling.
- Suitable for road and track
Vehicle Application Information: - standard replacement kit
- kit does not include ball joints, please re-use OE ball joints
- Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Alloy Lower Control Arm Assembly - Caster Increase
| ALOY0017K | 1 | | $1098.00 |
Control/Trailing Arm, wheel suspensionAlloy Lower Control Arm Assembly - Caster IncreaseLeft and Right Performance Arm Kit with Caster Increase DuroBall and reduced arm flex.
Corrosion resistant. SuperPro Roll Control WRX Supaloy Front Lower Control Arms increase the handling of your WRX to better than that of the STI. The arms are built with SuperPro increased caster ability and featuring the new “Grip Dynamics” system which combined improves grip for better handling and performance outcomes. - Alloy light-weight and stronger than original steel – less unsprung weight.
- Caster Increase dialled into rear bushing.
- SuperPro bushings for increased tyre contact patch control, minimal NVH with maximum service life and better handling.
- Suitable for road and track
Vehicle Application Information: - standard replacement kit
- kit does not include ball joints, please re-use OE ball joints
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| DURO4425K | 1 | | $319.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitDuroBall bushing assembly offers precise location and control with excellent articulation and NVH characteristics.The Duroball Technology Features:- A unique metal and polyurethane hybrid design for demanding applications.
- The core strengths of SuperPro polyurethane coupled with a specialised metal spherical bearing.
- Super tough metal poly hybrid design.
- More precise steering and handling
- All the articulation benefits of a vertical pivot solution with greater positive location and durability.
- Grip Dynamics options with EXTRA positive caster
Vehicle Application Information: - standard settings
- stiffer with no compromise in articulation
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Double Offset
| DURO4428K | 1 | | $319.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Double OffsetPerformance setting, Caster increase only. DuroBall bushing assembly offers precise location and control with excellent articulation and NVH characteristics.The Duroball Technology Features:- A unique metal and polyurethane hybrid design for demanding applications.
- The core strengths of SuperPro polyurethane coupled with a specialised metal spherical bearing.
- Super tough metal poly hybrid design.
- More precise steering and handling
- All the articulation benefits of a vertical pivot solution with greater positive location and durability.
- Grip Dynamics options with EXTRA positive caster
Vehicle Application Information: - alignment correction
- stiffer with no compromise in articulation
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front Bush Kit
| SPF3728K | 1 | | $97.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Roll Centre Adjusting Ball Joint
| TRC0002 | 1 | | $319.00 |
Ball JointRoll Centre Adjusting Ball JointRoll Centre Correction Kit Vehicle Application Information: - 2 x Ball Joints & 2 x Tie Rod Ends
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Axle alignment required after fitting
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement | TRC4085 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkStandard Replacement 12mm Ball Joint Link
180 Degree opposed
Length 71mm center to center - Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Suits OE Bar Size | SPF4396-24K | 1 | | $53.00 |
Mounting, stabiliser barSway Bar Mount Bush KitSuits OE Bar Size available Sizes 24 & 27mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF4396-27K | 1 | | $53.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 24 & 27mm Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | 24mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0013RZ-24 | 1 | | $347.00 |
Stabiliser Bar, suspension24mm Heavy Duty 3 Position Blade Adjustable Sway Bar- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Lower & Adjustable Toe Control Arm Kit
| TRC0015 | 1 | | $608.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower & Adjustable Toe Control Arm KitVehicle Application Information: - Adjustment Range: +/- 3 Degrees Toe and +/- 2.0 Degrees of Camber
Left and right performance upgrade kit with camber and toe adjustment Vehicle Application Information: - alignment correction - camber & toe adjustable
- Fitting Position: Rear
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Lower Camber Bolt Kit
| TRC0011CBK | 1 | | $30.00 |
Kit, camber adjustmentControl Arm Lower Camber Bolt KitCamber Bolt Replacement Kit to suit TRC0015 & TRC0011 - Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | Control Arm Lower Complete Adjustable Arm Kit
| TRC0011 | 1 | | $380.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Complete Adjustable Arm KitVehicle Application Information: - +/- 1 Degree Camber Adjustment available
Left and right arm assemblies with SuperPro bushes - Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Bush Kit
| SPF3106K | 1 | | $97.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitVehicle Application Information: - Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Bush Kit - Double Offset
| SPF3107K | 1 | | $181.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Lower-Outer Bush Kit
| SPF3104K | 1 | | $105.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer Bush KitVehicle Application Information: - to suit vehicles with hyme joint in hub
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Lower-Outer Bush Kit
| SPF3233AK | 1 | | $174.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer Bush KitReplacement Hyme Joint Vehicle Application Information: - Fitting time [min]: 90
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 90
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 120
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit
| SPF3100K | 1 | | $195.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitVehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit - Double Offset
| SPF3101K | 1 | | $226.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Crossmember Insert Enhancement Kit
| SPF3907K | 1 | | $129.00 |
Bush, sub-frameCrossmember Insert Enhancement KitIncludes upper & lower inserts - Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential Bracket Mount Bush Kit Rear | SPF3201K | 1 | | $115.00 |
Bush, differential mountDifferential Bracket Mount Bush KitRear - Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential Centre Rear Support Void Filler
| SPF4297K | 1 | | $47.00 |
Mounting, differentialDifferential Centre Rear Support Void Filler- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Differential Pinion, Bracket Mount Bush Kit Front | SPF3200K | 1 | | $106.00 |
Bush, differential mountDifferential Pinion, Bracket Mount Bush KitFront - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 180
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty
| SPF3915K | 1 | | $251.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy DutyNon-adjustable fully articulating performance link set - Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Brace Kit
| TRC1005 | 1 | | $116.00 |
Stabiliser Bar, suspensionSway Bar Mount Brace Kit- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Suits OE Bar Size | SPF3108-20K | 1 | | $67.00 |
Mounting, stabiliser barSway Bar Mount Bush KitSuits OE Bar Size available Sizes 14, 15, 16, 18, 19, 20, 21, 22, 23 & 25mm Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Toe Control Arm Inner Bush Kit
| SPF3099K | 1 | | $148.00 |
Mounting Kit, control/trailing arm mountingToe Control Arm Inner Bush KitVehicle Application Information: - outer bush is ball joint style
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Toe Control Arm Kit - Adjustable
| TRC0007 | 1 | | $252.00 |
Control/Trailing Arm, wheel suspensionToe Control Arm Kit - AdjustableVehicle Application Information: - Adjustment Range: +/- 3 Degrees Toe
Left and Right Toe Arm Alignment Correction Kit Vehicle Application Information: - alignment correction - toe adjustment
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Front Bush Kit
| SPF3817K | 1 | | $92.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Front Bush Kit- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Rear Bush Kit
| SPF3098K | 1 | | $134.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Rear Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Rear
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Part of kit: (x)
|