| Front and Rear | Radius Arms & Panhard Rods Bush Kit
Up to 1989 | KIT059K | 1 |  | $536.39 |
 Suspension KitRadius Arms & Panhard Rods Bush KitUp to 1989 Kit Contains SPF0396K x 1, SPF0397K x 1, SPF0398K x 1, SPF0399K x 4, SPF0444K x 1 As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of these vehicles.
Having a solid axle, front and rear, the caster arms and trailing arm bushes stabilise the forward and aft movement of both axles. As these bushings wear they impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking.
The panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking.
SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling.
You need a SuperPro Complete Bush Kit if:
- The rubber bushings start to show signs of wear
- Bigger Wheels & Tyres are fitted
- The vehicles ride height is changed
- The vehicle carries more loads
Kit contains: - Front Radius Arm To Diff Mount Bush Kit
- Front Radius Arm To Chassis Mount Bush Kit
- Front and Rear Panhard Rod Bush Kit
- Axle alignment required after fitting
- Fitting Position: Front and Rear
 10hrs Fitment Time Fitment Difficulty- Part of kit: (x)
|
| Front and Rear | Radius Arms & Panhard Rods Bush Kit - Extra Offset
Suits 75mm or More Raised Height Vehicle | KIT060ADJXK | 1 | | $582.04 |
 Suspension KitRadius Arms & Panhard Rods Bush Kit - Extra OffsetSuits 75mm or More Raised Height Vehicle As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of these vehicles.
Having a solid axle, front and rear, the caster arms and trailing arm bushes stabilise the forward and aft movement of both axles. As these bushings wear they impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking.
The panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking.
SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling.
You need a SuperPro Complete Bush Kit if:
- The rubber bushings start to show signs of wear
- Bigger Wheels & Tyres are fitted
- The vehicles ride height is changed
- The vehicle carries more loads
Kit contains: - Front Radius Arm To Diff Mount Bush Kit - Offset
- Front Radius Arm To Chassis Mount Bush Kit
- Front and Rear Panhard Rod Bush Kit to Suit all Models
- Rear Trailing Arm Upper and Lower Bush Kit
- Fitment Difficulty
- Fitting Position: Front and Rear
- 10hrs Fitment Time
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front and Rear | Radius Arms & Panhard Rods Bush Kit - Standard Replacement
Suits Standard Height Vehicle | KIT060K | 1 | | $519.29 |
 Suspension KitRadius Arms & Panhard Rods Bush Kit - Standard ReplacementSuits Standard Height Vehicle As the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of these vehicles.
Having a solid axle, front and rear, the caster arms and trailing arm bushes stabilise the forward and aft movement of both axles. As these bushings wear they impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking.
The panhard rod bushes control the sideways movement of both axles; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking.
SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling.
You need a SuperPro Complete Bush Kit if:
- The rubber bushings start to show signs of wear
- Bigger Wheels & Tyres are fitted
- The vehicles ride height is changed
- The vehicle carries more loads
Kit contains: - Front Radius Arm To Diff Mount Bush Kit
- Front Radius Arm To Chassis Mount Bush Kit
- Front and Rear Panhard Rod Bush Kit to Suit all Models
- Rear Trailing Arm Upper and Lower Bush Kit
- Fitment Difficulty
- 10hrs Fitment Time
- Fitting Position: Front and Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit - Lower
Raises vehicle approximately 10mm | SPF4998-10K | 2 |  | $41.04 |
Spring CapCoil Spring Spacer Bush Kit - LowerRaises vehicle approximately 10mm A=160.50mm B=82mm C=10mm - Fitment Difficulty
- Axle alignment required after fitting
- 2hrs Fitment Time
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit - Upper
Raises Vehicle approximately 5mm | SPF1734-5K | 2 | | $28.35 |
Spring CapCoil Spring Spacer Bush Kit - UpperRaises Vehicle approximately 5mm A=170mm B=115mm C=5mm D=10mm E=125mm Spring Spacer will reform to shape of the coil - Fitment Difficulty
- Fitting Position: Front
- 2hrs Fitment Time
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit - Upper
Raises Vehicle approximately 15mm | SPF1734K | 2 | | $48.88 |
Spring CapCoil Spring Spacer Bush Kit - UpperRaises Vehicle approximately 15mm A=170mm B=115mm C=15mm D=10mm E=125mm Spring Spacer will reform to shape of the coil - 2hrs Fitment Time
- Axle alignment required after fitting
- Fitting Position: Front
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Coil Spring Spacer Bush Kit - Upper
Raises vehicle approximately 30mm | SPF2364-30K | 2 | | $85.41 |
Spring CapCoil Spring Spacer Bush Kit - UpperRaises vehicle approximately 30mm A=170mm B=69-116mm C=30mm D=20mm E=123mm
Helical Spring Seat & Tapered ID - Fitting Position: Front
- Fitment Difficulty
- Axle alignment required after fitting
- 2hrs Fitment Time
- Part of kit: (x)
|
| Front | Lift Correction Arm Kit
Left and Right Arms for Lifted Vehicles with Caster Correction | TRC1015 | 1 |  | $1030.00 |
Control ArmLift Correction Arm KitLeft and Right Arms for Lifted Vehicles with Caster Correction Vehicle Application Information: - Please Note:
Sway Bar Bracket SPF0981K and Sway Bar Mount Bush SPF0642-__K (Sway Bar measurement required) need to be purchased separately!
Raising a vehicle washes off castor and the effects of decreased castor are a loss of straight line stability, vague steering at higher speeds and can cause castor shimmy.
The SuperPro Lift Correction Arm Kit solves the issues with “built in” castor correction in the design, with nearly 4 Degrees for a 50mm lift and 2.5 Degrees for a 75mm lift.
Add in more articulation by utilising the SuperPro Hybrid material and this arm becomes the only choice for on or off road use.
- Fitment Difficulty
- Fitting Position: Front
- Axle alignment required after fitting
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Panhard Rod Bush Kit
| SPF0398K | 1 | | $57.10 |
Bush, panhard rodPanhard Rod Bush Kit- Fitting Position: Front
- Axle alignment required after fitting
- 1.5hrs Fitment Time
- Fitment Difficulty
- 1.5hrs Fitment Time
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Radius Arm To Diff Mount Bush Kit
Standard Replacement | SPF0396K | 1 | | $130.10 |
Bush, radius armRadius Arm To Diff Mount Bush KitStandard Replacement - Axle alignment required after fitting
- Fitting Position: Front
- 4hrs Fitment Time
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Radius Arm To Diff Mount Bush Kit - Extra Offset
Suits 75mm or More Lifted Vehicles | SPF1721XK | 1 | | $199.83 |
Bush, radius armRadius Arm To Diff Mount Bush Kit - Extra OffsetSuits 75mm or More Lifted Vehicles Alignment Correction with extra offset for "High Lift Vehicles"
Allows up to 4 degrees Caster increase Vehicle Application Information: - Extra offset High Lift Vehicles To increase caster settings
- Fitment Difficulty
- Axle alignment required after fitting
- Fitting Position: Front
- 4hrs Fitment Time
- Part of kit: (x)
|
| Front | Radius Arm To Diff Mount Bush Kit - Offset
Suits 50mm Raised Vehicles | SPF1721K | 1 | | $196.53 |
Bush, radius armRadius Arm To Diff Mount Bush Kit - OffsetSuits 50mm Raised Vehicles Alignment Correction
Allows up to 2 degrees Caster increase - Fitment Difficulty
- Fitting Position: Front
- 4hrs Fitment Time
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Radius Arm To Chassis Bush Kit - Setback
Alignment correction kit | SPF3467K | 1 | | $79.99 |
Bush, radius armRadius Arm To Chassis Bush Kit - Setback Alignment correction kit - Fitting Position: Front
- Fitment Difficulty
- Axle alignment required after fitting
- 2hrs Fitment Time
- Part of kit: (x)
|
| Front | Radius Arm To Chassis Mount Bush Kit
| SPF0397K | 1 | | $52.72 |
Bush, radius armRadius Arm To Chassis Mount Bush Kit- 2hrs Fitment Time
- Fitment Difficulty
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Radius Arm To Diff Mount Bush Kit – Hybrid Version
Delivers superior articulation and durability
Suits Standard Height vehicles and/or Lifted vehicles fitted with aftermarket Caster increase arms. | TRC0396 | 1 | | $252.00 |
Bush, radius armRadius Arm To Diff Mount Bush Kit – Hybrid VersionDelivers superior articulation and durability
Suits Standard Height vehicles and/or Lifted vehicles fitted with aftermarket Caster increase arms. - Fitting Position: Front
- Fitment Difficulty
- 4hrs Fitment Time
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Shock Absorber Upper & Lower Bush Kit
| SPF0740K | 2 | | $27.11 |
Bush, shock absorberShock Absorber Upper & Lower Bush Kit Fitment Difficulty- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link - Heavy Duty Extended
| TRC4307 | 2 | | $70.00 |
Sway Bar Stabiliser KitSway Bar Link - Heavy Duty ExtendedSuperPro Heavy Duty Extended Thread Sway Bar Links are designed and manufactured to suit lifted Vehicles from 2-8”.
They are designed to allow you to effectively trim the Sway Bar Link to your desired length to provide adequate tail shaft clearance and Sway Bar alignment.
Manufactured from a Heavy Duty 16mm rod our Heavy Duty Sway Bar Links offer increased strength and stud articulation, providing for less stress on the sway bar links during wheel articulation. - Fitting Position: Rear
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link Bush Kit
| SPF2092BK | 1 | | $22.01 |
Bush, shock absorberSway Bar Link Bush Kit- 0.75hrs Fitment Time
- Fitting Position: Front
- Fitment Difficulty
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF0626-18K | 1 | | $24.43 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 15, 18, 20, 21, 22, 23, 24, 25 & 27mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - 0.75hrs Fitment Time
- Fitment Difficulty
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF0626-20K | 1 | | $24.43 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 15, 18, 20, 21, 22, 23, 24, 25 & 27mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitment Difficulty
- 0.75hrs Fitment Time
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF0626-22K | 1 | | $24.43 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 15, 18, 20, 21, 22, 23, 24, 25 & 27mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitment Difficulty
- 0.75hrs Fitment Time
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | 18mm Heavy Duty Non Adjustable Sway Bar
| SNR8 | 1 | | |
Sway Bar Stabiliser Kit18mm Heavy Duty Non Adjustable Sway BarSelby Classic Range by Roll Control. Finished in Black with Black SuperPro Bushings  Fitment Difficulty- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Panhard Rod Bush Kit
1989 model on | SPF0398K | 1 | | $57.10 |
|
| Rear | Panhard Rod Bush Kit
Up to 1989 model | SPF0444K | 1 | | $76.10 |
Bush, panhard rodPanhard Rod Bush KitUp to 1989 model Vehicle Application Information: - Up to 1989 model Use SPF0398K 1989 on
- Fitment Difficulty
- 1.5hrs Fitment Time
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link - Heavy Duty Extended
| TRC4307 | 2 | | $70.00 |
Sway Bar Stabiliser KitSway Bar Link - Heavy Duty ExtendedSuperPro Heavy Duty Extended Thread Sway Bar Links are designed and manufactured to suit lifted Vehicles from 2-8”.
They are designed to allow you to effectively trim the Sway Bar Link to your desired length to provide adequate tail shaft clearance and Sway Bar alignment.
Manufactured from a Heavy Duty 16mm rod our Heavy Duty Sway Bar Links offer increased strength and stud articulation, providing for less stress on the sway bar links during wheel articulation. - Fitting Position: Rear
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Sway Bar Link To Chassis Bush Kit
| SPF2092B-4K | 1 | | $13.30 |
Sway Bar Bush KitSway Bar Link To Chassis Bush Kitre-use all original washers - 0.5hrs Fitment Time
- Fitting Position: Rear
- Fitment Difficulty
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Measure bar diameter 15, 18, 20, 22, 24mm available | SPF0627-18K | 1 | | $27.65 |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure bar diameter 15,18,20,22,24mm available - Fitment Difficulty
- 0.75hrs Fitment Time
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Trailing Arm Kit - Lower
Suits Litfed vehicles - 11mm Extended Length | TRC1027 | 1 | | $308.00 |
Control ArmTrailing Arm Kit - LowerSuits Litfed vehicles - 11mm Extended Length These lower trailing arms are longer than the standard arms and are fitted with a Polyurethane spherical joint, with all the articulation and none of the side effects of running a metal one in this location. The bushing delivers: - No noticeable NVH increase
- High articulation
- Long service life
- Lifetime warranty
This control arm set is suitable for a repair enhancement on standard height suspension and up to 75mm raised suspension. - 1hrs Fitment Time
- Fitting Position: Rear
- Fitment Difficulty
- Part of kit: (x)
|
| Rear | Trailing Arm Kit - Upper Adjustable
| TRC1026 | 1 | | $380.00 |
Control ArmTrailing Arm Kit - Upper Adjustable These upper adjustable arms have the unique SuperPro “double locking” mechanism that eliminates the adjusters coming loose. Fitted with a Polyurethane spherical joint, with all the articulation and none of the side effects of running a metal one in this location. The bushing delivers: - No noticeable NVH increase
- High articulation
- Long service life
- Lifetime warranty
This control arm set is suitable for a repair enhancement on standard height suspension and up to 75mm raised suspension. - Fitting Position: Rear
- 1hrs Fitment Time
- Fitment Difficulty
- Axle alignment required after fitting
- Part of kit: (x)
|
| Rear | Trailing Arm Lower Bush Kit
| SPF0399K | 2 | | $69.99 |
Control Arm-/Trailing Arm BushTrailing Arm Lower Bush Kit- 3hrs Fitment Time
- Fitting Position: Rear
- Fitment Difficulty
- Part of kit: (x)
|
| Rear | Trailing Arm Upper Bush Kit
| SPF0399K | 2 | | $69.99 |
Control Arm-/Trailing Arm BushTrailing Arm Upper Bush Kit- 3hrs Fitment Time
- Fitting Position: Rear
- Fitment Difficulty
- Part of kit: (x)
|
