Front | Control Arm Assembly Kit
| TRC0090 | 1 | | $242.00 |
Control/Trailing Arm, wheel suspensionControl Arm Assembly KitStandard replacement The SuperPro Front Arms are a standard replacement with Bushings and Ball Joint. Front Lower Control Arms come complete with Hybrid Bushing and heavy duty Ball Joint. These Bushings allow full articulation and movement without binding and with no increase in noise, vibration or harshness.
SuperPro Tip Designed and packaged to be replaced as a pair. SuperPro maintains it is critical for a pair to installed to any application at the same time to avoid any detrimental handling and braking characteristics from a mismatch of bushing material. Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Radius Arm Assembly Kit
| TRC0091 | 1 | | $356.00 |
Control/Trailing Arm, wheel suspensionRadius Arm Assembly KitStandard replacement The SuperPro Front Arms are a standard replacement with Bushings and Ball Joint. Front Caster/Radius Arms utilise a SuperPro Bushing with a heavy duty Ball Joint. The Bushings allow full articulation and movement without binding and with no increase in noise, vibration or harshness.
SuperPro Tip Designed and packaged to be replaced as a pair. SuperPro maintains it is critical for a pair to installed to any application at the same time to avoid any detrimental handling and braking characteristics from a mismatch of bushing material. Vehicle Application Information: - Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2569-24K | 1 | | $97.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: available Sizes 22.5, 23, 24, 26, 27, 28, 29 & 30.8mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2569-26K | 1 | | $97.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 22.5, 23, 24, 26, 27, 28, 29 & 30.8mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Bush Kit
| SPF2421K | 1 | | $102.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitNote: Vehicles with multi-link rear suspension only.
Not suited for 318ti. - Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Part of kit: (x)
|
Rear | Control Arm Lower-Outer Bush Kit
| SPF3806K | 1 | | $229.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Outer Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit
| SPF2422K | 1 | | $128.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitNot suited for 318ti - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit - Offset
| SPF2668K | 1 | | $176.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - OffsetAlignment Correction - Camber Adjustable
Not suited for 318ti - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential Pinion Mount Bush Kit
| SPF4330K | 1 | | $216.00 |
Bush, differential mountDifferential Pinion Mount Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 360
- Fitting Position: Rear
- Fitting time [min]: 360
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Spring Insulator Lower Bush Kit
| SPF1358-10K | 2 | | $55.00 |
Spring SeatSpring Insulator Lower Bush KitA=138mm B=33.8mm C=10mm Vehicle Application Information: - to suit IRS vehicles - raises vehicles approximately 15mm
- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: SPF1358-6K (x1)
|
Rear | Spring Insulator Lower Bush Kit
| SPF1358-6K | 2 | | $38.00 |
Spring SeatSpring Insulator Lower Bush KitA=138mm B=33.8mm C=6mm Vehicle Application Information: - to suit IRS vehicles - raises vehicles approximately 9mm
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting time [min]: 60
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: SPF1358-10K (x1)
|
Rear | Spring Insulator Lower Bush Kit
| SPF1358-8K | 2 | | $47.00 |
Spring SeatSpring Insulator Lower Bush KitA=138mm B=33.8mm C=8mm Vehicle Application Information: - to suit IRS vehicles - raises vehicles approximately 12mm
- Fitting time [min]: 60
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Axle alignment required after fitting
- Part of kit: SPF1358-10K (x1)
|
Rear | Subframe Mount Bush Kit
| SPF4328K | 1 | | $377.00 |
Bush, sub-frameSubframe Mount Bush KitKit Contains All Bushings for Both Mounting Positions of the Subframe - Fitting time [min]: 360
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 360
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Sway Bar Link Upper & Lower Bush Kit
| SPF2419K | 1 | | $65.00 |
Mounting, stabiliser barSway Bar Link Upper & Lower Bush Kit- Fitting Position: Rear
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Trailing Arm Lower Front Bush Kit
| SPF2146K | 1 | | $204.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Lower Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 180
- Part of kit: (x)
|