| Front | Control Arm Assembly Kit
| TRC1022 | 1 |  | $270.00 |
Control ArmControl Arm Assembly KitStandard Replacement.
Includes left and right Arms fitted with Ball joints and SuperPro Bushes to reduce Arm movement.
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
| SPF2418K | 1 |  | $108.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Front Bush Kit- Fitting Time [min.]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Standard replacement | SPF3111K | 1 | | $127.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitStandard replacement 2 x Standard bushings per kit Vehicle Application Information: - Fitting Time [min.]: 210
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction | SPF3113K | 1 | | $141.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 Degree Caster Adjustment available
2 x offset bushings for caster adjustment A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - 60mm OD bush check size
- Performance Handling Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
Alignment Correction | SPF3112K | 1 | | $141.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- 60mm OD bush check size
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 210
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4038 | 2 | | $31.40 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm Ball Joint Link
180 degree opposed
Length 265mm center to center - Fitting Difficulty: moderate
- Fitting Time [min.]: 30
- Fitting Position: Front
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
| SPF3359K | 1 | | $89.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kit- Fitting Difficulty: moderate
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit - Offset
| SPF3360K | 1 | | $93.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kit - Offset- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Control Arm Upper-Outer Bush Kit
| SPF3359K | 1 | | $89.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Outer Bush Kit- Fitting Difficulty: moderate
- Fitting Time [min.]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $35.90 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Time [min.]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Trailing Arm Front Bush Kit
| SPF3358K | 1 | | |
Control Arm-/Trailing Arm BushTrailing Arm Front Bush Kit- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Time [min.]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
