Front | Bump Stop Bush Kit
| SPF2044K | 1 | | $51.00 |
Bump StopBump Stop Bush Kit2 x Bump Stops & 2 x Caps per Kit
50mm Long x 56.3 Wide x 14-18mm Inside Diameter - Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Camber Caster Adjusting Kit
| SPF1600K | 2 | | $174.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting KitIncludes shims - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Camber Caster Adjusting Kit
| SPF1600SLK | 2 | | $182.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting KitSuper low option
Includes shims - Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Camber Caster Adjusting Shim Kit
| SPF1600-1.6SK | 1 | | $37.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting Shim Kit1.6 mm shims (10 pack) - Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Camber Caster Adjusting Shim Kit
| SPF1600-3SK | 1 | | $58.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting Shim Kit3mm shims (10 pack) - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Camber Caster Adjusting Shim Kit
| SPF1600-6SK | 1 | | $75.00 |
Shim, caster/camber adjustmentCamber Caster Adjusting Shim Kit6mm shims (10 pack) - Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit
| TRC1103 | 1 | | $713.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitVehicle Application Information: Left and Right Arms for Standard Replacement and Repair Upgrade Our front lower control arm kit for the Ford AU, BA & BF series has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1103 by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.Vehicle Application Information: - standard replacement
- Includes Ball Joint
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Front Bush Kit
| SPF1838K | 1 | | $203.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting time [min]: 210
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF1839K | 1 | | $113.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Upper Inner Alignment Bush Kit
| KIT199K | 1 | | $392.00 |
Mounting, control/trailing armControl Arm Upper Inner Alignment Bush KitAlignment Correction - Camber Adjustable
Suits Standard Height Vehicles Kit contains: - Front Control Arm Upper-Inner Bush Kit
- Front Camber Caster Adjusting Kit
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 270
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Upper Inner Alignment Bush Kit
| KIT200K | 1 | | $407.00 |
Mounting, control/trailing armControl Arm Upper Inner Alignment Bush KitAlignment Correction - Camber Adjustable
Suits Lowered Vehicles Kit contains:- Front Control Arm Upper-Inner Bush Kit
- Front Camber Caster Adjusting Kit - Super Low Option
- Fitting time [min]: 270
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper Inner Bush Kit
| SPF1887K | 1 | | $88.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Position: Front
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Shock Absorber Lower Bush Kit
| SPF0299K | 1 | | $68.00 |
Bush, shock absorberShock Absorber Lower Bush KitBush located in lower control arm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Shock Absorber Upper Bush Kit
| SPF1616K | 1 | | $61.00 |
Bush, shock absorberShock Absorber Upper Bush KitVehicle Application Information: - top side only, lower side is part of spring seat
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush (Power Steering)
| SPF1837K | 1 | | $40.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4009L | 1 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkVehicle Application Information: - suits models 05/2000 - on
10mm Ball Joint Link
90 Degree opposed
Length 88mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4009R | 1 | | $45.00 |
Stabiliser Bar, suspensionSway Bar LinkVehicle Application Information: - suits models 05/2000 - on
10mm Ball Joint Link
90 Degree opposed
Length 88mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link and Bush Kit
| SPF2966BK | 1 | | $94.00 |
Stabiliser Bar, suspensionSway Bar Link and Bush KitVehicle Application Information: - standard replacement
- suits models to - 04/2000
165mm total Length, Thread Length each end 65mm Sway Bar Link and Bush Kit - Fitting Position: Rear
- Fitting Position: Front
- Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Front Bush Kit
| SPF3598K | 1 | | $145.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush Kit- Fitting time [min]: 240
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Rear Bush Kit
| SPF3599K | 1 | | $149.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower Outer Bush Kit
| SPF3234K | 1 | | $173.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Outer Bush KitVehicle Application Information: Vehicle Application Information: - Replacement Hyme Joint
- 46.9mm housing
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 90
- Fitting time [min]: 90
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Front Bush Kit
| SPF3635K | 1 | | $181.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Front Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Part of kit: (x)
|
Rear | Control Arm Upper Outer Bush Kit
| SPF3233AK | 1 | | $174.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Outer Bush KitVehicle Application Information: Replacement Hyme Joint Vehicle Application Information: - Fitting time [min]: 90
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 90
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 120
- Part of kit: (x)
|
Rear | Differential Mount Bush Kit
| SPF5714K | 1 | | $323.00 |
Bush, differential mountDifferential Mount Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 180
- Part of kit: (x)
|
Rear | Shock Absorber Upper Bush Kit
| SPF5305K | 1 | | $97.00 |
Bush, shock absorberShock Absorber Upper Bush Kit- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Subframe Mount Kit - Front Position
| SPF5047K | 1 | | $181.00 |
Bush, sub-frameSubframe Mount Kit - Front Position- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Subframe Mount Kit - Rear Position
| SPF5046K | 1 | | $472.00 |
Bush, sub-frameSubframe Mount Kit - Rear Position- Fitting Position: Rear
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 | | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1615-27K | 1 | | $43.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 23.5, 24, 25, 26, 27, 28, 29, 30 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1615-28K | 1 | | $43.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 23.5, 24, 25, 26, 27, 28, 29, 30 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1615-30K | 1 | | $43.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 22, 23, 23.5, 24, 25, 26, 27, 28, 29, 30 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Toe Control Arm Inner Bush Kit
| SPF2749K | 1 | | $143.00 |
Mounting, control/trailing armToe Control Arm Inner Bush KitVehicle Application Information: - IRS Rear Suspension Remove original shell for fitment of bushing.
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Part of kit: (x)
|