Front | 30mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0087FZ-30 | 1 | | $416.00 |
Stabiliser Bar, suspension30mm Heavy Duty 2 Position Blade Adjustable Sway BarVehicle Application Information: - to suit standard & FE3 suspension
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 210
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10245 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: - to suit standard & FE3 suspension
10mm Ball Joint Adjustable Link
Minimum Length 300 mm - Maximum Length 345 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Bump Stop Bush Kit
| SPF2883K | 1 | | $171.00 |
Bump StopBump Stop Bush KitDesigned to suit lowered vehicles - Fitting time [min]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 150
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Caster Arm Complete Assembly
| TRC1011 | 1 | | $601.00 |
Control/Trailing Arm, wheel suspensionCaster Arm Complete AssemblyReplacement Arms for Performance and Repair Upgrade with SuperPro Bushings Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Complete Assembly
| TRC1010 | 1 | | $307.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Complete AssemblyReplacement Arms for Performance and Repair Upgrade with SuperPro Bushings Vehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Control Arm Lower Inner Bush Kit
| SPF2862K | 1 | | $246.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitRemove original shell Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Enhancement Bush Kit- Front Alignment
| KIT154K | 1 | | $478.00 |
Mounting, control/trailing armEnhancement Bush Kit- Front AlignmentControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.
Kit contains: - Front Control Arm Lower-Inner Bush Kit
- Front Strut Bar To Chassis Mount Bush Kit
- Fitting time [min]: 330
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 330
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Spring Seat Upper Bush Kit
| SPF4091K | 1 | | $61.00 |
Spring SeatSpring Seat Upper Bush Kit- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Strut Bar Caster Plates
| SPF2859K | 1 | | $70.00 |
Bush, strut mountStrut Bar Caster PlatesDesigned to increase or decrease Caster by +/- 1 Degree (1 kit required per Side) - Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF2858K | 1 | | $285.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Strut Top & Bearing
| SPF1590BK | 1 | | $295.00 |
Bush, strut mountStrut Top & BearingPerformance Kit.
Kit contains SuperPro Polyurethane Mounts & Bearings. - Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4005L | 1 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
125 Degree opposed
Length 300mm Vehicle Application Information: - left hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4005R | 1 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
125 Degree opposed
Length 300mm Vehicle Application Information: - right hand side
- standard replacement
- Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2863-23K | 1 | | $65.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 23, 24, 26, 27, 28, 28.7, 29.7 & 31mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting time [min]: 150
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 150
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | 22mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0001RZ-22 | 1 | | |
22mm Heavy Duty 3 Position Blade Adjustable Sway BarVehicle Application Information: - does not suit FE3 suspension
- Fitting time [min]: 120
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Bump Stop Bush Kit
| SPF2883K | 1 | | $171.00 |
Bump Stop Bush Kit- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 150
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Bush Kit
| SPF2865K | 1 | | $107.00 |
Control Arm Lower Inner Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Lower Outer Bush Kit
| SPF2866K | 1 | | $96.00 |
Control Arm Lower Outer Bush KitVehicle Application Information: - will not suit vehicles with Hyme Joints
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Outer Bush Kit
| SPF5236K | 1 | | $78.00 |
Control Arm Upper Outer Bush Kit- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Outer Bush Kit
| SPF5707K | 1 | | $271.00 |
Control Arm Upper Outer Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 150
- Part of kit: (x)
|
Rear | Control Arm Upper-Rear Bush Kit
| SPF4286K | 1 | | $199.00 |
Control Arm Upper-Rear Bush KitVehicle Application Information: - to suit Alloy Arm & Bracket
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential to Subframe Mount Bush Kit
| SPF2869K | 1 | | $293.00 |
Differential to Subframe Mount Bush Kit- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Enhancement Bush Kit - Rear Traction
| KIT176K | 1 | | $554.00 |
Enhancement Bush Kit - Rear Traction- Fitting time [min]: 360
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Spring Seat Bush Kit
| SPF3247K | 1 | | $62.00 |
Spring Seat Bush KitVehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Subframe to Chassis Mount Bush Kit
| SPF3918K | 1 | | $565.00 |
Subframe to Chassis Mount Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 240
- Part of kit: (x)
|
Rear | Subframe to Chassis Spacer on Front Mount Bush Kit
| SPF2873K | 1 | | $73.00 |
Subframe to Chassis Spacer on Front Mount Bush Kit- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Subframe Void Filler Bush Kit - Bottom
| SPF2871K | 1 | | $151.00 |
Subframe Void Filler Bush Kit - Bottom- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
Rear | Subframe Void Filler Bush Kit - Top
| SPF2872K | 1 | | $100.00 |
Subframe Void Filler Bush Kit - Top- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Sway Bar LinkVehicle Application Information: - to suit V6 and 6.0L (L77) V8 Engine
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4021 | 2 | | $39.00 |
Sway Bar LinkVehicle Application Information: - to suit V6 and 6.0L (L77) V8 Engine
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $199.00 |
Sway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: - to suit V6 and 6.0L (L77) V8 Engine
- does not suit FE3 suspension
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC4305 | 1 | | $199.00 |
Sway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: - to suit 6.2L (LS3, LSA) V8 Engine
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Sway Bar Mount To Crossmember Bush Kit
| SPF0613-20K | 1 | | $39.00 |
Sway Bar Mount To Crossmember Bush KitVehicle Application Information: - to suit FE3 Suspension
- to suit original sway bar
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | Toe Control Arm Inner & Outer Bush Kit
| SPF3237K | 1 | | $117.00 |
Toe Control Arm Inner & Outer Bush Kit- Fitting Position: Rear
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Trailing Arm Bush Kit
| SPF2867K | 1 | | $159.00 |
Trailing Arm Bush Kit- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Upper Outer Control Arm Bush Kit
| SPF5236K | 1 | | $78.00 |
Upper Outer Control Arm Bush Kit- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|