Front and Rear | Enhancement Bush Kit
| KIT137K | 1 | | $762.00 |
Mounting, control/trailing armEnhancement Bush KitKit contains: - Front Strut Bar To Chassis Mount Bush Kit
- Front Control Arm Lower-Inner Bush Kit
- Front Strut Bar To Lower Control Arm Bush Kit
- Front Sway Bar Link to Strut Kit
- Rear IRS Adjusting Camber & Toe Kit
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 630
- Fitting Position: Front and Rear
- Part of kit: (x)
|
Front | Alignment Bush Kit - Front End
| KIT153K | 1 | | $349.00 |
Mounting, control/trailing armAlignment Bush Kit - Front EndKit contains: - Front Strut Bar To Chassis Mount Bush Kit
- Front Strut Bar To Lower Control Arm Bush Kit
- Front Control Arm Lower-Inner Bush Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 330
- Fitting time [min]: 330
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit
| SPF2365-10K | 2 | | $42.00 |
Spring SeatCoil Spring Spacer Bush KitA=164mm B=127.5mm C=10mm Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Coil Spring Spacer Bush Kit
| SPF2365-5K | 2 | | $29.00 |
Spring SeatCoil Spring Spacer Bush KitA=164mm B=127.5mm C=5mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Bush Kit
| SPF1232K | 1 | | $89.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Part of kit: KIT153K (x1)
|
Front | Spring Insulator Upper Bush Kit
| SPF2498K | 1 | | $81.00 |
Spring SeatSpring Insulator Upper Bush KitA=165mm B=128.7mm C=5.5mm D=13.5mm E=138mm, Helical Spring Seat - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF1632K | 1 | | $32.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF2339K | 1 | | $290.00 |
Kit, caster adjustmentStrut Bar To Chassis Mount Bush KitAdjustable Caster Kit
Alignment Correction Super Pro Adjustable Strut Bar To Chassis Mount Bush Kit is considered one of those “must have” bushing replacements for the GMH vehicles. From the factory, the Strut bar is secured to the front subframe with a soft, fluid-filled bushing that breaks down prematurely. Its job is to absorb most of the braking load while locating the wheel and control arm for caster. However, when this bushing breaks down, it results in excessive wheel movement under braking resulting in degraded braking performance, pedal feel and increased tyre wear.The SuperPro Adjustable Strut Bar To Chassis Mount Bush Kit correct and prevent this issue and can provides increased caster adjustment for improved handling. It is the perfect repair, repair upgrade or performance solution. - Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Part of kit: KIT153K (x1)
|
Front | Strut Bar To Lower Control Arm Bush Kit
| SPF0756CK | 1 | | $71.00 |
Bush, strut mountStrut Bar To Lower Control Arm Bush KitComfort option to be used with SPF2339K
Suited to cast steel arms - Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Strut Bolt Replacement Kit
| SPF4960K | 2 | | $89.00 |
Bolt, axle strutStrut Bolt Replacement Kit- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Strut Top & Bearing
| SPF1590BK | 1 | | $295.00 |
Bush, strut mountStrut Top & BearingPerformance Kit.
Kit contains SuperPro Polyurethane Mounts & Bearings. - Fitting time [min]: 120
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF0994K | 1 | | $47.00 |
Mounting, stabiliser barSway Bar Link Bush KitVehicle Application Information: - bushes only to suit after-market sway bar & SPF0987K
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit
| SPF2755LK | 1 | | $28.00 |
Bush, shock absorberSway Bar Link Bush KitVehicle Application Information: - replacement bushes to suit SPF0987K
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Link to Strut Kit
| SPF0987K | 1 | | $78.00 |
Stabiliser Bar, suspensionSway Bar Link to Strut KitVehicle Application Information: - H/Duty link rod replacement & bush kit
- Fitting Position: Front
- Fitting time [min]: 90
- Fitting Difficulty: easy
- Part of kit: KIT137K (x1)
|
Front | Sway Bar Mount Bush Kit
| SPF1453-27K | 1 | | $44.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting time [min]: 45
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1453-28K | 1 | | $44.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1453-30K | 1 | | $44.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 16, 18, 19, 20, 22, 23, 24, 25, 26, 27, 28, 30 & 32mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | Bump Stop Bush Kit - Upper
| SPF3906K | 1 | | $118.00 |
Spring SeatBump Stop Bush Kit - Upper- Fitting Difficulty: moderate
- Fitting time [min]: 45
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting time [min]: 45
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Control Arm Bush Kit
| SPF0611K | 1 | | $102.00 |
Mounting Kit, control/trailing arm mountingControl Arm Bush KitVehicle Application Information: - to suit IRS vehicles (Independent Rear Suspension)
- IRS vehicles require 2 kits if not using adjuster kits (SPF2545K).
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Crossmember Supplement Washers Bush Kit
| SPF0840K | 1 | | $249.00 |
Bush, sub-frameCrossmember Supplement Washers Bush KitTo suit OE Bush
HSV series use lower bushing only as factory is solid top
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | IRS Adjusting Camber & Toe Kit
| SPF0877K | 1 | | $321.00 |
Mounting, control/trailing armIRS Adjusting Camber & Toe KitSuited to vehicles without Factory Toe Adjusting Arm - Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Part of kit: KIT137K (x1)
|
Rear | IRS Adjusting Kit Toe Only Bush Kit
| SPF0877TK | 1 | | $224.00 |
Mounting, control/trailing armIRS Adjusting Kit Toe Only Bush KitSuited to vehicles without Factory Toe Adjusting Arm - Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Shock Absorber Upper Bush Kit
| SPF0201K | 1 | | $39.00 |
Bracket, stabiliser mountingShock Absorber Upper Bush KitVehicle Application Information: - Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Spring Insulator Lower Bush Kit
| SPF1358-10K | 2 | | $55.00 |
Spring SeatSpring Insulator Lower Bush KitA=138mm B=33.8mm C=10mm Vehicle Application Information: - to suit IRS vehicles - raises vehicles approximately 15mm
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Part of kit: SPF1358-6K (x1)
|
Rear | Spring Insulator Lower Bush Kit
| SPF1358-6K | 2 | | $38.00 |
Spring SeatSpring Insulator Lower Bush KitA=138mm B=33.8mm C=6mm Vehicle Application Information: - to suit IRS vehicles - raises vehicles approximately 9mm
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Part of kit: SPF1358-8K (x1)
|
Rear | Spring Insulator Lower Bush Kit
| SPF1358-8K | 2 | | $47.00 |
Spring SeatSpring Insulator Lower Bush KitA=138mm B=33.8mm C=8mm Vehicle Application Information: - to suit IRS vehicles - raises vehicles approximately 12mm
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: SPF1358-6K (x1)
|
Rear | Subframe Front Bush Kit
| SPF3267K | 1 | | $332.00 |
Bush, sub-frameSubframe Front Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Subframe Front Bush Kit
| SPF3367K | 1 | | $374.00 |
Bush, sub-frameSubframe Front Bush KitCompetition/Race Kit
IRS only Vehicle Application Information: - competition/race kit
- to suit IRS vehicles (Independent Rear Suspension)
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Sway Bar Link Bush Kit
| SPF0513K | 1 | | $115.00 |
Mounting, stabiliser barSway Bar Link Bush Kit- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 90
- Part of kit: (x)
|
Rear | Sway Bar Mount To Crossmember Bush Kit
| SPF0613-18K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount To Crossmember Bush Kitavailable Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 45
- Part of kit: (x)
|
Rear | Sway Bar Mount To Crossmember Bush Kit
| SPF0613-19K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount To Crossmember Bush Kitavailable Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount To Crossmember Bush Kit
| SPF0613-20K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount To Crossmember Bush Kitavailable Sizes 12, 13, 14, 15, 16, 16.5, 17, 18, 19, 20, 22, 22.5, 23, 23.2, 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|