| Front | Control Arm Lower-Inner Bush Kit
Replaces OEM 8943169030, Must re-use original shell | SPF1889K | 1 |  |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush KitReplaces OEM 8943169030,Must re-use original shell Vehicle Application Information: - 2WD Replaces OE# 8943169030
- Axle alignment required after fitting
 Fitment Difficulty- Fitting Position: Front
 4hrs Fitment Time- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit
| SPF2014-95K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kitsuits 4WD Vehicles only Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - H Kit for Severe Conditions or Heavy Duty applications
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 4hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit
| SPF2014K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kitsuits 4WD Vehicles only Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 4hrs Fitment Time
- Part of kit: (x)
|
| Front | Strut Bar To Chassis Mount Bush Kit
| SPF1255K | 1 | |
Bush, strut mountStrut Bar To Chassis Mount Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link Inner Bush Kit
2WD Only | SPF0806-4K | 1 | |
Sway Bar Bush KitSway Bar Link Inner Bush Kit2WD Only 4 bushes in kit  Fitment Difficulty- Fitting Position: Front
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link Inner Bush Kit
2WD Only | SPF0806K | 1 | |
Bush, panhard rodSway Bar Link Inner Bush Kit2WD Only 8 bushes in kit - Fitment Difficulty
- Fitting Position: Front
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1085 | 1 |  |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 185 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.  Fitment Difficulty- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link Outer Bush Kit
| SPF2755SK | 1 | |
Bush, shock absorberSway Bar Link Outer Bush Kit- Fitment Difficulty
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1092-25.5K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 22, 23, 25.5, 27 & 28mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount To Link Bush Kit
| SPF1092-27K | 1 | |
Sway Bar Bush KitSway Bar Mount To Link Bush Kitavailable Sizes 22, 23, 25.5, 27 & 28mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Rear | Leaf Spring Bush Kit
| KIT070HK | 1 |  |
Bushing, leaf springLeaf Spring Bush KitKit contains: 1 x SPF0972HK, 1 x SPF2231-8HK These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! Vehicle Application Information: - H Kit for Severe Conditions or Heavy Duty applications
- Fitment Difficulty
- Fitting Position: Rear
- 3.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Leaf Spring Bush Kit
| KIT070K | 1 | |
Bushing, leaf springLeaf Spring Bush KitKit contains: 1 x SPF0972K, 1 x SPF2231-8K These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! - Fitment Difficulty
- Fitting Position: Rear
- 3.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Front Eye Bush Kit
| SPF0972HK | 1 | |
Bushing, leaf springSpring Front Eye Bush KitVehicle Application Information: - H Kit for Severe Conditions or Heavy Duty applications
- Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Front Eye Bush Kit
| SPF0972K | 1 | |
Bushing, leaf springSpring Front Eye Bush Kit- Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Rear Bush Kit All
| SPF2231-8K | 1 | |
Bushing, leaf springSpring Rear Bush Kit All- Fitment Difficulty
- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
