Front | Control Arm Lower-Front Bush Kit Suits models with the front of the lower control arm front position mounted to chassis via a bracket | SPF1296K | 1 |  | $81.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Front Bush KitSuits models with the front of the lower control arm front position mounted to chassis via a bracket - Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Front Bush Kit Remove original shell for fitment | SPF2029K | 1 |  | $87.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Front Bush KitRemove original shell for fitment Vehicle Application Information: - 4WD Remove original shell for fitment OE# 8944088411
- Fitting Position: Front
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Rear Bush Kit Remove original shell for fitment, OEM 8944088420 | SPF1496K | 1 |  | $139.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush KitRemove original shell for fitment, OEM 8944088420 Vehicle Application Information: - 4WD Remove original shell for fitment OE# 8944088420
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush Kit
| SPF2014-95K | 1 |  | $223.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - H Kit for Severe Conditions or Heavy Duty applications
- Axle alignment required after fitting
- Fitting Time [min.]: 240
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush Kit
| SPF2014K | 1 |  | $185.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 240
- Part of kit: (x)
|
Front | Shock Absorber Upper Bush Kit
| SPF2755SK | 1 |  | $12.00 |
Bush, shock absorberShock Absorber Upper Bush Kit- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Link Bush Kit early models | SPF2906K | 1 |  | $43.00 |
Sway Bar Bush KitSway Bar Link Bush Kitearly models OD: 25mm
ID: 10mm
Height: 16.5mm - Fitting Time [min.]: 40
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1085 | 1 |  | $178.20 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 185 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF0971-25.5K | 1 |  | $35.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 21, 24, 25.5, 26, 27, 28 & 29mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF0971-27K | 1 |  | $35.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 18, 19, 20, 21, 24, 25.5, 26, 27, 28 & 29mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Time [min.]: 45
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Leaf Spring Bush Kit
| KIT070K | 1 |  | $91.00 |
Bushing, leaf springLeaf Spring Bush KitKit contains: 1 x SPF0972K, 1 x SPF2231-8K These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! - Fitting Position: Rear
- Fitting Time [min.]: 210
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Spring Front Eye Bush Kit
| SPF0972K | 1 |  | $53.00 |
Bushing, leaf springSpring Front Eye Bush Kit- Fitting Position: Rear
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Spring Rear Bush Kit All
| SPF2231-8K | 1 |  | $48.00 |
Bushing, leaf springSpring Rear Bush Kit All- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 |  | $166.90 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Time [min.]: 60
- Part of kit: (x)
|