| Front and Rear | SuperPro Easy-Lift Kit
suits 4WD & 2WD Hi-Rider - This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks, 4 U Bolts & Hand Brake Bracket Mount Extension Kit | TRC185LK | 1 |  |
 Suspension KitSuperPro Easy-Lift Kit
suits 4WD & 2WD Hi-Rider - This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers, 2 Rear Raising Blocks, 4 U Bolts & Hand Brake Bracket Mount Extension Kit Vehicle Application Information: - To be used with standard suspension only.
SuperPro Roll Control Ezy-Lift Kits are the ideal way to lift a standard height Dual or Single Cab 4WD Ute and retain the standard suspension. Each kit has been tested and fitted to ensure the lift for each application is the right amount to maintain a safe working environment for the standard suspension. Everything that is required has been supplied in each Kit, including comprehensive fitting instructions to ensure the right outcome every time. Easy Lift Kit (Spacer Lift kit) legal compliance. We explain here about the legality of spacer lift kits in particular how SuperPro spacer lift kits are legal: Click - Axle alignment required after fitting
 Fitment Difficulty- Fitting Position: Front and Rear
 2.5hrs Fitment Time- Part of kit: (x)
- Front and Rear
- TRC185LK
- 1
- 2SP,2BLOCKS,4UB
- More Info
|
| Front | Control Arm Lower-Inner Bush Kit
suits 4WD & 2WD Hi-Rider | SPF4032K | 1 |  |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Bush Kitsuits 4WD & 2WD Hi-Rider Kit contains front & rear position bushings Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 4hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit
suits 4WD & 2WD Hi-Rider | SPF4031K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kitsuits 4WD & 2WD Hi-Rider Kit contains front & rear position bushings Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 4hrs Fitment Time
- Part of kit: (x)
|
| Front | ReadyStrut Top Caps
suits 4WD & 2WD Hi-Rider | RS005 | 2 | |
Suspension Strut MountingReadyStrut Top Capssuits 4WD & 2WD Hi-Rider Vehicle Application Information: - suits vehicles with flat ground coil
Strut Cap, Spring Seat, Nuts & Washers - Fitting Position: Front
- Part of kit: (x)
|
| Front | Shock Absorber Upper Bush Kit
suits 4WD & 2WD Hi-Rider | SPF3757K | 1 | |
Bush, shock absorberShock Absorber Upper Bush Kitsuits 4WD & 2WD Hi-Rider - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Spring Seat Upper Bush Kit
suits 4WD & 2WD Hi-Rider | SPF3002K | 1 | |
Bush, coil springSpring Seat Upper Bush Kitsuits 4WD & 2WD Hi-Rider - Fitting Position: Front
- Part of kit: (x)
|
| Front | SuperPro Easy-Lift Strut Spacer Kit
suits 4WD & 2WD Hi-Rider - This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers | TRC185FLK | 1 | |
Suspension KitSuperPro Easy-Lift Strut Spacer Kitsuits 4WD & 2WD Hi-Rider - This kit will lift the vehicle approx. 45mm and retains the standard suspension. Kit contains 2 Front Strut Spacers Vehicle Application Information: - To be used with standard height suspension only
Easy Lift Kit (Spacer Lift kit) legal compliance. We explain here about the legality of spacer lift kits in particular how SuperPro spacer lift kits are legal: Click - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 1.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link
suits 4WD & 2WD Hi-Rider - Cut To Length Link | TRC4004 | 2 | |
Sway Bar Stabiliser KitSway Bar Linksuits 4WD & 2WD Hi-Rider - Cut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm  Fitment Difficulty- Fitting Position: Front
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
suits 4WD & 2WD Hi-Rider | TRC1085 | 1 | |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustablesuits 4WD & 2WD Hi-Rider 10mm Ball Joint Adjustable Link
Minimum Length 140 mm - Maximum Length 185 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.  Fitment Difficulty- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Suits OE Bar Size | SPF4030-29K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush KitSuits OE Bar Size available Sizes 28 & 29mm Sway Bar mount bushes are an important part of the whole sway bar system.
Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar.
An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | 20mm Heavy Duty 3 Position Blade Adjustable Sway Bar
suits 4WD | RC0031RZ-20 | 1 | |
 Sway Bar Stabiliser Kit20mm Heavy Duty 3 Position Blade Adjustable Sway Barsuits 4WD SuperPro Roll Control Rear Sway Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Sway Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Sway Bars and link package is designed correctly, replacement Sway Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Sway Bars will:- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
SuperPro Tip - Fit this product with a SuperPro Roll Control Front Sway Bar to get the complete handling upgrade package Vehicle Application Information: - Can not be used with Airbags fitted in the rear
- Fitment Difficulty
- Fitting Position: Rear
- 2hrs Fitment Time
- Part of kit: (x)
|
| Rear | Greasable Pin and Bush Kit - Front Eye
suits 4WD & 2WD Hi-Rider | SPF4456K | 1 | |
Bushing, leaf springGreasable Pin and Bush Kit - Front Eyesuits 4WD & 2WD Hi-Rider - Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Greasable Shackle and Bush Kit
suits 2WD Standard Chassis | KIT077SK | 1 |  |
Bush, spring shackle spring carrierGreasable Shackle and Bush Kitsuits 2WD Standard Chassis The Shackles and Fixed Pins are often overlooked when upgrading the suspension of a 4WD.
Original shackles and fixed pins corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle.
Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
By fitting the complete package of Greasable Shackles, Fixed Pins and Bush Kit the rear end of any 4WD will handle just about anything that is throw at it!
- Fitment Difficulty
- Fitting Position: Rear
- 4.5hrs Fitment Time
- Part of kit: (x)
- Rear
- KIT077SK
- 1
- 2SH,2FP,12B,2T
- SuperPro Vehicle Kit
- More Info
|
| Rear | Greasable Shackle and Bush Kit
suits 4WD & 2WD Hi-Rider - Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings | KIT185SK | 1 | |
Bush, spring shackle spring carrierGreasable Shackle and Bush Kitsuits 4WD & 2WD Hi-Rider - Contains Greasable Shackles and Fixed Pins with all SuperPro Bushings The Shackles and Fixed Pins are often overlooked when upgrading the suspension of a 4WD.
Original shackles and fixed pins corrode and destroy the bushings and it is the leaf spring bushings that stabilise the movement of the rear axle.
Worn or inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle leading to the vehicle 'wandering' all over the road and be unstable under heavy braking.
This can be especially noticeable carrying a load or towing a boat or caravan.
By fitting the complete package of Greasable Shackles, Fixed Pins and Bush Kit the rear end of any 4WD will handle just about anything that is throw at it!
- Fitment Difficulty
- Fitting Position: Rear
- 1.5hrs Fitment Time
- Part of kit: (x)
- Rear
- KIT185SK
- 1
- 2SH,2FP,12B,2T
- SuperPro Vehicle Kit
- More Info
|
| Rear | Hand Brake Cable Extension Kit
suits 4WD & 2WD Hi-Rider | SPF4801K | 1 | |
Accessory KitHand Brake Cable Extension Kitsuits 4WD & 2WD Hi-Rider Required when fitting lifted, high load carrying leaf spring packs. - Fitment Difficulty
- Fitting Position: Rear
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Leaf Spring Bush Kit
suits 2WD Standard Chassis | KIT077K | 1 | |
Bushing, leaf springLeaf Spring Bush Kitsuits 2WD Standard Chassis These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to "wander" all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! - Fitment Difficulty
- Fitting Position: Rear
- 4.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Leaf Spring Bush Kit
suits 4WD & 2WD Hi-Rider | KIT185K | 1 | |
Bushing, leaf springLeaf Spring Bush Kitsuits 4WD & 2WD Hi-Rider Kit contains: - Front Eye Bush Kit
- Rear Lower Bush Kit
- Rear Upper Shackle Bush Kit
These bushings are often overlooked when upgrading the suspension of a 4WD. Leaf spring bushings stabilise the movement of the rear axle, inferior bushes in this area will cause the solid rear axle to move and impart rear end passive steer to the vehicle. It also causes the vehicle to 'wander' all over the road and be unstable under heavy braking. This can be especially noticeable carrying a load or towing a boat or caravan. The OE rubber style bushes are designed to work at standard height with standard tyres and with standard loads. By fitting SuperPro Bushings and upgrading to Greaseable Shackles the rear end of your 4WD will handle just about anything you can throw at it! - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 4.5hrs Fitment Time
- Part of kit: (x)
- Rear
- KIT185K
- 1
- 12B, 2T
- SuperPro Vehicle Kit
- More Info
|
| Rear | Spring Front Eye Bush Kit
suits 2WD Standard Chassis | SPF1684HK | 1 | |
Bushing, leaf springSpring Front Eye Bush Kitsuits 2WD Standard Chassis Vehicle Application Information: - H Kit for Severe Conditions or Heavy Duty applications
- Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Front Eye Bush Kit
suits 2WD Standard Chassis | SPF1684K | 1 | |
Bushing, leaf springSpring Front Eye Bush Kitsuits 2WD Standard Chassis - Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Front Eye Bush Kit
suits 4WD & 2WD Hi-Rider | SPF2670K | 1 | |
Bushing, leaf springSpring Front Eye Bush Kitsuits 4WD & 2WD Hi-Rider - Fitment Difficulty
- Fitting Position: Rear
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Rear Lower Bush Kit
suits all | SPF2231-4K | 1 | |
Bushing, leaf springSpring Rear Lower Bush Kitsuits all - Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Rear Upper Shackle Bush Kit
suits 2WD Standard Chassis | SPF0972HK | 1 | |
Bushing, leaf springSpring Rear Upper Shackle Bush Kitsuits 2WD Standard Chassis Vehicle Application Information: - H Kit for Severe Conditions or Heavy Duty applications
- Fitment Difficulty
- Fitting Position: Rear
- 2hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Rear Upper Shackle Bush Kit
suits 2WD Standard Chassis | SPF0972K | 1 | |
Bushing, leaf springSpring Rear Upper Shackle Bush Kitsuits 2WD Standard Chassis - Fitment Difficulty
- Fitting Position: Rear
- 2hrs Fitment Time
- Part of kit: (x)
|
| Rear | Spring Rear Upper Shackle Bush Kit
suits 4WD & 2WD Hi-Rider | SPF4040K | 1 | |
Bushing, leaf springSpring Rear Upper Shackle Bush Kitsuits 4WD & 2WD Hi-Rider - Fitment Difficulty
- Fitting Position: Rear
- 2hrs Fitment Time
- Part of kit: (x)
|
