| Front | 27mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0008FZ-27 | 1 |  | $392.38 |
Stabiliser Bar, chassis27mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Control Arm Lower-Front Bush Kit
| SPF3885K | 1 |  | $92.04 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
Offset. | SPF3886K | 1 | | $437.55 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Bush KitOffset. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit
Standard replacement. | SPF3296K | 1 | | $164.60 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitStandard replacement. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Control Arm Upper-Inner Bush Kit - Double Offset
Offset tubes for +/- camber adjustment. Note vehicles with wide wheels may need guard rolled to prevent scrubbing. | SPF3297K | 1 | | $181.98 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Double OffsetOffset tubes for +/- camber adjustment. Note vehicles with wide wheels may need guard rolled to prevent scrubbing. Vehicle Application Information: - 0.5 Degrees of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
AVAILABLE SIZES - 27, 28mm | SPF3838-27K | 1 | | $61.99 |
Mounting, stabiliserSway Bar Mount Bush KitAVAILABLE SIZES - 27,28mm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
AVAILABLE SIZES - 27, 28mm | SPF3838-28K | 1 | | $61.99 |
Mounting, stabiliserSway Bar Mount Bush KitAVAILABLE SIZES - 27,28mm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0008RZ-24 | 1 | | $392.38 |
Stabiliser Bar, chassis24mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Lower-Front Outer Bush Kit
Bushing mounted in hub. | SPF3318K | 1 | | $173.62 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Front Outer Bush KitBushing mounted in hub. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Lower-Rear Outer Bush Kit
Bushing mounted in hub | SPF3322K | 1 | | $198.42 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Rear Outer Bush KitBushing mounted in hub - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit
Standard replacement | SPF3313K | 1 | | $161.79 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitStandard replacement - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Control Arm Upper-Inner Bush Kit - Double Offset
| SPF3313XK | 1 | | $253.55 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Differential Mount Bush Kit
Contains Pinion & Rear Differential Mounts | SPF3849K | 1 | | $176.67 |
Mounting, differentialDifferential Mount Bush KitContains Pinion & Rear Differential Mounts Vehicle Application Information: Designed to reduce unwanted Differential movement without increasing Noise, Vibration & Harshness - Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Differential Rear Mount Bush Kit
| SPF3856K | 1 | | $80.74 |
Bush, differential mountDifferential Rear Mount Bush KitContains Rear Differential Mount only Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 240
- Part of kit: (x)
|
| Rear | Shock Absorber Lower Bush Kit
| SPF3322K | 1 | | $198.42 |
Mounting Kit, control/trailing arm mountingShock Absorber Lower Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $190.88 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
AVAILABLE SIZES - 24, 25mm | SPF3839-24K | 1 | | $55.11 |
Mounting, stabiliserSway Bar Mount Bush KitAVAILABLE SIZES - 24,25mm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
AVAILABLE SIZES - 24, 25mm | SPF3839-25K | 1 | | $55.11 |
Mounting, stabiliserSway Bar Mount Bush KitAVAILABLE SIZES - 24,25mm - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 90
- Part of kit: (x)
|
| Rear | Trailing Arm Front Bush Kit
| SPF3314K | 1 | | $151.79 |
Mounting Kit, control/trailing arm mountingTrailing Arm Front Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Rear | Trailing Arm Rear Bush Kit
Bushing mounted in hub. | SPF3315K | 1 | | $117.84 |
Mounting Kit, control/trailing arm mountingTrailing Arm Rear Bush KitBushing mounted in hub. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 150
- Part of kit: (x)
|
