Front | Control Arm Lower-Inner Bush Kit
| SPF1483K | 1 | | $277.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitVehicle Application Information: - Stepped shell 38mm to 40mm outside diameter
- Fitting Difficulty: difficult
- Fitting time [min]: 210
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Upper Inner & Outer Bush Kit
| SPF0723K | 1 | | $395.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner & Outer Bush Kit- Fitting time [min]: 300
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Upper Inner & Outer Bush Kit
| SPF1659K | 1 | | $393.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner & Outer Bush KitVehicle Application Information: - 1 degree of camber adjustment
Vehicle Application Information: - alignment correction
- camber adjustable
- Fitting Difficulty: difficult
- Fitting time [min]: 270
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF2492K | 1 | | $61.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - Pinion end on steering rack housing diameter 41.5mm
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF1202K | 1 | | $129.00 |
Bush, strut mountStrut Bar To Chassis Mount Bush KitVehicle Application Information: - standard replacement
- 69.5mm long crush tube, bracket width 40mm
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit - Double Offset
| SPF1202AK | 1 | | $190.00 |
Mounting Kit, control/trailing arm mountingStrut Bar To Chassis Mount Bush Kit - Double OffsetA Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- 69.5mm long crush tube, bracket width 40mm
- Fitting Position: Front
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025A | 1 | | $160.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable 10mm Ball Joint Adjustable Link
Minimum Length 85 mm - Maximum Length 100 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1636-26K | 1 | | $39.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 24, 25, 26, 27, 28 & 29mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 45
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1636-27K | 1 | | $68.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 24, 25, 26, 27, 28 & 29mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner Bush Kit
| SPF1639K | 1 | | $120.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush KitVehicle Application Information: - crush tube length 45mm
- remove original shell
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner & Outer Bush Kit
| SPF1638K | 2 | | $150.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner & Outer Bush KitVehicle Application Information: - standard replacement
- crush tube length 40mm
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner or Outer Bush Kit - Double Offset
| SPF1869K | 2 | | $222.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner or Outer Bush Kit - Double OffsetVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - crush tube length 40mm
- alignment correction
- Inner & outer camber adjustment
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting time [min]: 240
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential To Crossmember To Chassis Mount Bush Kit
| SPF3775K | 1 | | $164.00 |
Bush, differential mountDifferential To Crossmember To Chassis Mount Bush Kit- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Rear
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Radius Arm Upper-Inner/Outer Bush Kit
| SPF1638K | 1 | | $150.00 |
Mounting Kit, control/trailing arm mountingRadius Arm Upper-Inner/Outer Bush KitVehicle Application Information: - standard replacement
- crush tube length 40mm
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Subframe Traction Bush Kit
| KIT201K | 1 | | $93.00 |
Bush, sub-frameSubframe Traction Bush KitA complete rear Subframe Kit for the rear of various Nissan 180SX, 200SX, 300ZX and Skyline models for Performance, Traction and Drifting. This kit allows for the rear subframe inclination angle to be changed for performance, traction or drifting. - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: (x)
|
Rear | Sway Bar Link Bush Kit
| SPF0306K | 1 | | $40.00 |
Mounting, stabiliser barSway Bar Link Bush Kit- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-21K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting time [min]: 45
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-22K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 45
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1485-23K | 1 | | $42.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 10, 12, 15,16,18, 20, 21, 22, 23, 24, 25 & 26mm available Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 45
- Part of kit: (x)
|