Front | Control Arm Lower-Inner Bush Kit
| SPF3090K | 1 | | $215.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Control Arm Upper-Inner Bush Kit
| SPF1352K | 1 | | $154.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper-Inner Bush KitVehicle Application Information: - to suit 20mm wide Housing
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF3009K | 1 | | $52.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush Kit- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Strut Bar To Chassis Mount Bush Kit
| SPF2989K | 1 | | $356.00 |
Bush, strut mountStrut Bar To Chassis Mount Bush Kit- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1245A | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 125 mm - Maximum Length 145 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1846-21K | 1 | | $92.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 21, 22, 23, 24, 26, 27, 28, 30 & 32mm Vehicle Application Information: - 21mm ID
- to suit 49mm bracket height
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1846-27K | 1 | | $92.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 21, 22, 23, 24, 26, 27, 28, 30 & 32mm Vehicle Application Information: - 27mm ID
- to suit 49mm bracket height
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF1846-30K | 1 | | $92.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 21, 22, 23, 24, 26, 27, 28, 30 & 32mm Vehicle Application Information: - 30mm ID
- to suit 49mm bracket height
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Measure bar diameter, 26.5mm available | SPF3011-26.5K | 1 | | $114.00 |
Mounting, stabiliser barSway Bar Mount Bush KitMeasure bar diameter, 26.5mm available - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Control Arm Lower Inner Bush Kit
| SPF3014K | 1 | | $120.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Bush KitVehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Lower Outer Bush Kit
| SPF3015K | 1 | | $102.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Outer Bush KitVehicle Application Information: - bush located in hub assembly
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit
| SPF3012K | 1 | | $289.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitVehicle Application Information: - Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit - Double Offset
| SPF3013K | 1 | | $537.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - Double OffsetVehicle Application Information: - 0.75 to 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- camber adjustable
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 240
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Differential Mount Bushing Kit - Rear
| SPF4857-90K | 1 | | |
Mounting, differentialDifferential Mount Bushing Kit - RearVehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Differential Mount Bushing Kit - Rear
| SPF4857K | 1 | | $399.00 |
Mounting, differentialDifferential Mount Bushing Kit - RearVehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Differential Pinion Mount Bush Kit
| SPF2769K | 1 | | $125.00 |
Bush, differential mountDifferential Pinion Mount Bush Kit- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1045 | 1 | | $199.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 100 mm - Maximum Length 120 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. Vehicle Application Information: - Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1846-28K | 1 | | $92.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 21, 22, 23, 24, 26, 27, 28, 30 & 32mm Vehicle Application Information: - 28mm ID
- to suit 49mm bracket height
- Fitting Position: Front
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF1846-32K | 1 | | $92.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable sizes 21, 22, 23, 24, 26, 27, 28, 30 & 32mm Vehicle Application Information: - 32mm ID
- to suit 49mm bracket height
- Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Toe Control Arm Inner Bush Kit
| SPF3017K | 1 | | $80.00 |
Mounting, control/trailing armToe Control Arm Inner Bush KitVehicle Application Information: - outer end of arm is ball joint style bush
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 150
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Front Bush Kit
| SPF3016K | 1 | | $117.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Front Bush Kit- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Rear Bush Kit
| SPF2249K | 1 | | $72.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Rear Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Part of kit: (x)
|