| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degree Camber | SPF4351-17K | 1 |  |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degree Camber Camber Bolt Kit 17mm - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
PS & DS standard | SPF1363K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush KitPS & DS standard Vehicle Application Information:  2hrs Fitment Time- Axle alignment required after fitting
- Fitting Position: Front
 Fitment Difficulty- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
Alignment Correction | SPF1364K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush KitAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Vehicle Application Information: - PS increased DS standard caster
- 2hrs Fitment Time
- Fitment Difficulty
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower-Rear Bush Kit
Alignment Correction | SPF1365K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Rear Bush KitAlignment Correction Vehicle Application Information: - 1 Degree Caster Adjustment available
Vehicle Application Information: - PS & DS increased or decrease caster
- Axle alignment required after fitting
- Fitment Difficulty
- 2hrs Fitment Time
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link
Cut To Length Link | TRC4007 | 2 |  |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 12mm Ball Joint Link
Minimum Length 90mm - Maximum Length 320mm  Fitment Difficulty- 0.5hrs Fitment Time
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12160 | 1 | |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 210 mm - Maximum Length 260 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - 1hrs Fitment Time
 Fitment Difficulty- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Measure Bar Diameter, 24, 27, 30mm available | SPF1512-24K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush KitMeasure Bar Diameter, 24, 27, 30mm available - Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Suits O.E. Sway Bar Size, Measure Bar Diameter, 24, 27, 30mm available | SPF1512-26K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush KitSuits O.E. Sway Bar Size, Measure Bar Diameter, 24, 27, 30mm available - Fitting Position: Front
- Part of kit: (x)
|
| Rear | Panhard Rod To Chassis Mount Bush Kit
Standard axle | SPF1075K | 1 | |
Bush, panhard rodPanhard Rod To Chassis Mount Bush KitStandard axle - Fitting Position: Rear
- Fitment Difficulty
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Panhard Rod To Diff Mount Bush Kit
Standard axle | SPF1514K | 1 | |
Bush, panhard rodPanhard Rod To Diff Mount Bush KitStandard axle - Fitment Difficulty
- 1.5hrs Fitment Time
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Trailing Arm Lower Bush Kit
Beam axle only, Not IRS | SPF1513K | 1 | |
Control Arm-/Trailing Arm BushTrailing Arm Lower Bush KitBeam axle only, Not IRS - Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
| Rear | Trailing Arm Upper Bush Kit
Beam axle only, Not IRS | SPF1513K | 1 | |
Control Arm-/Trailing Arm BushTrailing Arm Upper Bush KitBeam axle only, Not IRS - Fitment Difficulty
- Fitting Position: Rear
- 4hrs Fitment Time
- Part of kit: (x)
|
