Front and Rear | Enhancement Bush Kit
| KIT188K | 1 | | $974.00 |
Mounting, control/trailing armEnhancement Bush KitKit contains: - Front Control Arm Lower-Inner Front Bush Kit
- Front Control Arm Lower-Inner Rear Bush Kit
- Rear Control Arm Lower-Inner & Outer Bush Kit
- Rear Control Arm Upper-Inner Bush Kit
- Rear Control Arm Upper-Outer Bush Kit Rear
- Lateral Arm Lower-Inner & Outer Bush Kit
- Axle alignment required after fitting
- Fitting time [min]: 480
- Fitting Position: Front and Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10245 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 300 mm - Maximum Length 345 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit 18mm ball joint up to chassis 214682, standard replacement | TRC1135 | 1 | | $385.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly Kit18mm ball joint up to chassis 214682, standard replacement Left and Right Arms for Standard Replacement and Repair Upgrade This front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.Vehicle Application Information: - 18mm ball joint
- standard replacement
- Includes Ball Joint
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit 21mm ball joint from chassis 214683, standard replacement | TRC1136 | 1 | | $385.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly Kit21mm ball joint from chassis 214683, standard replacement Left and Right Arms for Standard Replacement and Repair Upgrade This front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1136 by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.Vehicle Application Information: - 21mm ball joint
- standard replacement
- Includes Ball Joint
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Front Bush Kit
| SPF3115K | 1 | | $100.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Front Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush & Bracket Kit
| SPF4653K | 1 | | $379.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush & Bracket KitVehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: moderate
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF3368K | 1 | | $252.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Double Offset
| SPF3370K | 1 | | $251.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Double OffsetVehicle Application Information: - 1 degree caster adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Single Offset
| SPF3369K | 1 | | $251.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Single OffsetUse this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- alignment correction
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4025 | 2 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
180 Degree opposed
Length 300mm center to center Vehicle Application Information: - Fitting Difficulty: easy
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2141-21K | 1 | | $55.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 90
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 90
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Control Arm Lower Assembly Kit
| TRC1148 | 1 | | $154.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Assembly KitIncludes left and right arms and all bushings Our rear lower control arm kit is designed to provide a hassle-free repair and enhancement solution. It offers substantial benefits in terms of alignment and vehicle handling, serving as more than just a repair option – it's a genuine upgrade! Delivered as a comprehensive kit, it comes fully assembled with top-quality SuperPro bushings, making TRC1048 unquestionably the superior choice available in the market. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Part of kit: (x)
|
Rear | Blade Control Arm Front Kit
| SPF3466K | 1 | | $275.00 |
Mounting Kit, control/trailing arm mountingBlade Control Arm Front KitVehicle Application Information: - don't remove original shell
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower Inner & Outer Bush Kit
| SPF2324K | 1 | | $193.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner & Outer Bush KitRear Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 180
- Part of kit: (x)
|
Rear | Control Arm Upper Assembly Kit
| TRC1149 | 1 | | $185.00 |
Control/Trailing Arm, wheel suspensionControl Arm Upper Assembly KitIncludes left and right arms and all bushings Our rear upper control arm kit has been designed to be an easy repair upgrade solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with SuperPro bushings. We have made TRC1149 by far the best choice on the market. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 90
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit
| SPF2325K | 1 | | $153.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Inner Bush Kit - Double Offset
| SPF2326K | 1 | | $168.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Inner Bush Kit - Double OffsetVehicle Application Information: - 1 degree of camber adjustment
- to be used in this position when SPF2326K is already used in the outer position and 2 degrees camber adjustment in total required
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 150
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper Outer Bush Kit
| SPF2325K | 1 | | $153.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Outer Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper Outer Bush Kit - Double Offset
| SPF2326K | 1 | | $168.00 |
Mounting Kit, control/trailing arm mountingControl Arm Upper Outer Bush Kit - Double OffsetVehicle Application Information: - 1 degree of camber adjustment
- preferred position to gain 1 degree camber change
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 150
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Sway Bar Link Standard Replacement | TRC4002 | 2 | | $39.00 |
Stabiliser Bar, suspensionSway Bar LinkStandard Replacement 10mm Horizontal Ball Joint Link with 10mm Vertical Ball Joint
Length 76-86mm center to center Vehicle Application Information: - Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Toe Control Arm Lower Inner & Outer Bush Kit
| SPF2323K | 1 | | $233.00 |
Mounting Kit, control/trailing arm mountingToe Control Arm Lower Inner & Outer Bush KitFront Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Part of kit: (x)
|