Front and Rear | Enhancement Bush Kit
| KIT188K | 1 |  | $723.00 |
Suspension KitEnhancement Bush KitKit contains: - Front Control Arm Lower-Inner Front Bush Kit
- Front Control Arm Lower-Inner Rear Bush Kit
- Rear Control Arm Lower-Inner & Outer Bush Kit
- Rear Control Arm Upper-Inner Bush Kit
- Rear Control Arm Upper-Outer Bush Kit Rear
- Lateral Arm Lower-Inner & Outer Bush Kit
- Fitting Time [min.]: 480
- Fitting Position: Front and Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit 18mm ball joint up to 02.2006, standard replacement | TRC1135 | 1 |  | $350.00 |
 Control ArmControl Arm Lower Assembly Kit18mm ball joint up to 02.2006, standard replacement Left and Right Arms for Standard Replacement and Repair Upgrade This front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1135 by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 120
- Part of kit: (x)
|
Front | Control Arm Lower Assembly Kit 21mm ball joint from 03.2006-on, standard replacement | TRC1136 | 1 |  | $350.00 |
 Control ArmControl Arm Lower Assembly Kit21mm ball joint from 03.2006-on, standard replacement Left and Right Arms for Standard Replacement and Repair Upgrade This front lower control arm kit has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1136 by far the best choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions.
SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 120
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Front Bush Kit
| SPF3115K | 1 |  | $74.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Front Bush KitControl arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush & Bracket Kit Standard Replacement | SPF4653K | 1 |  | $281.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush & Bracket KitStandard Replacement - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: moderate
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit Standard Replacement. | SPF3368K | 1 |  | $187.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitStandard Replacement. Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Difficulty: difficult
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset Alignment Correction | SPF3370K | 1 |  | $186.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction Vehicle Application Information: - 1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset Alignment Correction | SPF3369K | 1 |  | $186.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Cut To Length Link | TRC4004 | 2 |  | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Time [min.]: 30
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Link Standard Replacement | TRC4025 | 2 |  | $32.30 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm Ball Joint Link
180 Degree opposed
Length 300mm center to center - Fitting Position: Front
- Fitting Time [min.]: 30
- Fitting Difficulty: easy
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 |  | $189.50 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Replacement bushing for original 20mm sway bar. Not suited to MPS or diesel. | SPF2141-20K | 1 |  | $40.00 |
Sway Bar Bush KitSway Bar Mount Bush KitReplacement bushing for original 20mm sway bar. Not suited to MPS or diesel. available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit After-market round sway bar | SPF2141-21K | 1 |  | $40.00 |
Sway Bar Bush KitSway Bar Mount Bush KitAfter-market round sway bar available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit After-market round sway bar | SPF2141-22K | 1 |  | $40.00 |
Sway Bar Bush KitSway Bar Mount Bush KitAfter-market round sway bar available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit After-market round sway bar | SPF2141-23K | 1 |  | $40.00 |
Sway Bar Bush KitSway Bar Mount Bush KitAfter-market round sway bar available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit After-market round sway bar | SPF2141-24K | 1 |  | $40.00 |
Sway Bar Bush KitSway Bar Mount Bush KitAfter-market round sway bar available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit Replacement bushing for original 21.4mm sway bar with flats where bushing is positioned. Not suited to MPS or diesel | SPF3114-21.4K | 1 |  | $60.00 |
Sway Bar Bush KitSway Bar Mount Bush KitReplacement bushing for original 21.4mm sway bar with flats where bushing is positioned. Not suited to MPS or diesel - Fitting Position: Front
- Fitting Time [min.]: 150
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Blade Control Arm Front Kit Do not remove original shell. | SPF3466K | 1 |  | $204.00 |
Control Arm-/Trailing Arm BushBlade Control Arm Front KitDo not remove original shell. - Fitting Time [min.]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Lower-Inner & Outer Bush Kit
| SPF2324K | 1 |  | $143.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner & Outer Bush KitRear Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner Bush Kit
| SPF2325K | 1 |  | $113.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush KitStandard Replacement Kit Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Time [min.]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper-Inner Bush Kit - Double Offset to be used in this Position when SPF2326K is already used in the outer Position and 2 Degrees Camber adjustment in total required | SPF2326K | 1 |  | $124.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Inner Bush Kit - Double Offsetto be used in this Position when SPF2326K is already used in the outer Position and 2 Degrees Camber adjustment in total required Vehicle Application Information: - 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Control Arm Upper-Outer Bush Kit
| SPF2325K | 1 |  | $113.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Outer Bush KitStandard Replacement Kit Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Fitting Time [min.]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Control Arm Upper-Outer Bush Kit - Double Offset prefered Position to gain 1 Degree Camber change | SPF2326K | 1 |  | $124.00 |
Control Arm-/Trailing Arm BushControl Arm Upper-Outer Bush Kit - Double Offsetprefered Position to gain 1 Degree Camber change Vehicle Application Information: - 1 Degree of Camber Adjustment
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Time [min.]: 150
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Link Standard Replacement | TRC4002 | 2 |  | $32.30 |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm Horizontal Ball Joint Link with 10mm Vertical Ball Joint
Length 76-86mm center to center - Fitting Time [min.]: 30
- Fitting Position: Rear
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit Replacement bushing for original 20mm sway bar. Not suited to MPS or diesel. | SPF2141-20K | 1 |  | $40.00 |
Sway Bar Bush KitSway Bar Mount Bush KitReplacement bushing for original 20mm sway bar. Not suited to MPS or diesel. available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit After-market round sway bar | SPF2141-21K | 1 |  | $40.00 |
Sway Bar Bush KitSway Bar Mount Bush KitAfter-market round sway bar available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit After-market round sway bar | SPF2141-22K | 1 |  | $40.00 |
Sway Bar Bush KitSway Bar Mount Bush KitAfter-market round sway bar available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit After-market round sway bar | SPF2141-23K | 1 |  | $40.00 |
Sway Bar Bush KitSway Bar Mount Bush KitAfter-market round sway bar available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Fitting Time [min.]: 180
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit After-market round sway bar | SPF2141-24K | 1 |  | $40.00 |
Sway Bar Bush KitSway Bar Mount Bush KitAfter-market round sway bar available Sizes: 20, 21, 22, 23. 24 & 25mm Sway Bar mount bushes are an important part of the whole sway bar system. Worn or rubber bushes in these locations lead to movement in the sway bar in unwanted directions that effect the effectiveness of the sway bar. An upgrade to SuperPro bushings can return lost sway bar performance and improve handling. Vehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Toe Control Arm Lower-Inner & Outer Bush Kit
| SPF2323K | 1 |  | $172.00 |
Control Arm-/Trailing Arm BushToe Control Arm Lower-Inner & Outer Bush KitFront Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting Time [min.]: 180
- Part of kit: (x)
|