Front | Camber Adjusting Bolt Kit
| SPF4351-17K | 1 | | $67.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitCamber Bolt Kit 17mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Front Bush Kit
| SPF2663K | 1 | | $42.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Front Bush KitVehicle Application Information: - re-use original mounting pin
- Fitting Difficulty: difficult
- Fitting time [min]: 180
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF1265K | 1 | | $94.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitVehicle Application Information: - to suit vehicles with cast arm
Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit
| SPF3173K | 1 | | $241.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush KitVehicle Application Information: - to suit vehicles with pressed steel arm
Vehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Double Offset
| SPF1267K | 1 | | $117.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Double OffsetVehicle Application Information: - to suit vehicles with cast arm
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - alignment correction
- PS increased, DS decreased caster
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Double Offset
| SPF3175K | 1 | | $196.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Double OffsetVehicle Application Information: - to suit vehicles with pressed steel arm
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle. The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel. This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Single Offset
| SPF1266K | 1 | | $117.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Single OffsetVehicle Application Information: - to suit vehicles with cast arm
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer’s specifications. Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver’s side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis. This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics. Follow the installation instructions and the problem is solved. Vehicle Application Information: - alignment correction
- Steering Pull Correction Kit
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Inner Rear Bush Kit - Single Offset
| SPF3174K | 1 | | $271.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Inner Rear Bush Kit - Single OffsetVehicle Application Information: - to suit vehicles with pressed steel arm
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- alignment correction
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Engine Steady Mount Bush Kit
| SPF1348K | 1 | | $78.00 |
Mounting, engineEngine Steady Mount Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting time [min]: 90
- Fitting Position: Front
- Part of kit: (x)
|
Front | Engine Steady Mount Bush Kit
| SPF2706K | 1 | | $188.00 |
Mounting, engineEngine Steady Mount Bush KitVehicle Application Information: - Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF3197K | 1 | | $57.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush KitVehicle Application Information: - Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Front
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4028L | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
160 degree opposed
Length 285mm center to center Vehicle Application Information: - left hand side
- standard replacement
- Fitting time [min]: 30
- Fitting Position: Front
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4028R | 1 | | $39.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
160 degree opposed
Length 285mm center to center Vehicle Application Information: - right hand side
- standard replacement
- Fitting Difficulty: moderate
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 | | $226.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Position: Rear
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF2880-17K | 1 | | $51.00 |
Mounting, stabiliser barSway Bar Mount Bush KitVehicle Application Information: - Replaces original part number 48815-06070 = 17mm
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Camber Adjusting Bolt Kit
| SPF4351-15K | 1 | | $58.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitCamber Bolt Kit 15mm Vehicle Application Information: - adds +/- 1.5 degrees camber
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting Position: Rear
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4004 | 2 | | $45.00 |
Stabiliser Bar, suspensionSway Bar Link10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm Vehicle Application Information: - Fitting Position: Front
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10105 | 1 | | $220.00 |
Stabiliser Bar, suspensionSway Bar Link Kit - Heavy Duty AdjustableVehicle Application Information: 10mm Ball Joint Adjustable Link
Minimum Length 160 mm - Maximum Length 205 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Front
- Fitting time [min]: 60
- Fitting Position: Rear
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF2284-17K | 1 | | $45.00 |
Mounting, stabiliser barSway Bar Mount Bush Kitavailable Sizes 14, 15, 16, 17 & 20mm Vehicle Application Information: - Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Trailing Arm Bush Kit
| SPF0823K | 1 | | $138.00 |
Mounting Kit, control/trailing arm mountingTrailing Arm Bush Kit- Axle alignment required after fitting
- Fitting time [min]: 180
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|