| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees camber | SPF4351-17K | 1 |  | $49.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 17mm - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Assembly Kit
Left and Right Arms for Standard Replacement and Repair Upgrade | TRC1020 | 1 |  | $284.30 |
 Control ArmControl Arm Assembly KitLeft and Right Arms for Standard Replacement and Repair Upgrade Vehicle Application Information: SuperPro arm kits offer the ideal repair and repair upgrade option.
The common failure point in the arm as fitted to these vehicles is the vertical pivot bushing in the rear position.
This bushing controls braking stability and wheel alignment.
Installing the SuperPro spherical style bushing gives handling and braking enhancements.
The front crossbar bushing maintains a similar material to O.E to help absorb unwanted noise transfer along the arm.
With the superior SuperPro rear position bushing, the wear and side twist load on the front position is reduced leading to increased durability.
SuperPro Tip
Designed and packaged to be replaced as a pair.
SuperPro maintains it is critical for a pair to installed to any application at the same time to avoid any detrimental handling and braking characteristics from a mismatch of bushing material. - Axle alignment required after fitting
- Fitting Position: Front
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Front Bush Kit
| SPF4099K | 1 | | $42.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Front Bush Kit- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 60
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Standard replacement kit | SPF2902K | 1 | | $116.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitStandard replacement kit - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Time [min.]: 150
- Fitting Difficulty: difficult
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction | SPF2904K | 1 | | $116.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
Alignment Correction | SPF2903K | 1 | | $116.00 |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by re-positioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting Time [min.]: 150
- Axle alignment required after fitting
- Part of kit: (x)
|
| Front | Steering Rack & Pinion Mount Bush (Power Steering)
| SPF3769K | 1 | | $89.00 |
Bush, steering rackSteering Rack & Pinion Mount Bush (Power Steering)- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Time [min.]: 180
- Fitting Position: Front
- Part of kit: (x)
|
| Front | Sway Bar Link
Cut To Length Link | TRC4007 | 2 | | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 12mm Ball Joint Link
Minimum Length 90mm - Maximum Length 320mm - Fitting Position: Front
- Fitting Time [min.]: 30
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC12200 | 1 | | $189.50 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable12mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Standard Sway Bar Size | SPF1319-24K | 1 | | $34.00 |
Sway Bar Bush KitSway Bar Mount Bush KitStandard Sway Bar Size available Sizes 21, 22, 23, 24, 25, 26, 27, 28, 29 & 31.75 mm Vehicle Application Information: - Fitting Time [min.]: 45
- Fitting Position: Front
- Fitting Difficulty: easy
- Part of kit: (x)
|
| Rear | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees camber | SPF4351-15K | 1 | | $42.00 |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 15mm - Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Lateral Arm Front-Inner Bush Kit
| SPF1947-2K | 1 | | $46.00 |
Control Arm-/Trailing Arm BushLateral Arm Front-Inner Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Lateral Arm Front-Outer Bush Kit
| SPF3880K | 1 | | $57.00 |
Control Arm-/Trailing Arm BushLateral Arm Front-Outer Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Lateral Arm Rear-Outer Bush Kit
Inner bushing is a Hyme Joint | SPF3880K | 1 | | $57.00 |
Control Arm-/Trailing Arm BushLateral Arm Rear-Outer Bush KitInner bushing is a Hyme Joint - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 180
- Fitting Position: Rear
- Part of kit: (x)
|
| Rear | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $37.00 |
Sway Bar Stabiliser KitSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Position: Rear
- Fitting Difficulty: easy
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10200 | 1 | | $189.50 |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 254 mm - Maximum Length 305 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF2284-16K | 1 | | $33.00 |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 14, 15, 16, 17 & 20mm Vehicle Application Information: - Fitting Position: Rear
- Fitting Time [min.]: 60
- Fitting Difficulty: moderate
- Part of kit: (x)
|
| Rear | Trailing Arm Lower Rear Bushing
Bushing located in the Hub Assembly | SPF4609K | 1 | | $61.00 |
Control Arm-/Trailing Arm BushTrailing Arm Lower Rear BushingBushing located in the Hub Assembly - Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 120
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Front Bush Kit
| SPF4609K | 1 | | $61.00 |
Control Arm-/Trailing Arm BushTrailing Arm Lower-Front Bush Kit- Fitting Position: Rear
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Time [min.]: 120
- Part of kit: (x)
|
