Front and Rear | Enhancement Bush Kit
| KIT242K | 1 | | $1418.00 |
Mounting, control/trailing armEnhancement Bush KitAs the OEM rubber bushings deteriorate they induce undesirable characteristics into the handling of any vehicle. Having an independent front suspension on this vehicle means the OEM bushes work very hard and durability, reliability and performance are compromised. With the solid axle rear suspension, the trailing arm bushes stabilise the forward and aft movement of the axle. As the front bushings wear they allow for the dynamic geometry of the suspension to change causing handling and tyre wear issues. As the rear bushings wear they can impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject to slight to severe directional changes under braking. The panhard rod bushes control the sideways movement of the rear axle; wear in these bushings make the vehicle unstable at higher speeds and prone to directional changes under braking. SuperPro bushings are more durable and give more positive arm location than the OEM rubber bushing, resulting in a vehicle that gives the driver confidence in the stability and handling. Lifting a vehicle also lifts the centre of gravity, in turn inducing greater forces on the suspension, requiring a more resilient suspension bushing in every location to control the attitude of the front upper and lower control arms as well as the rear upper and lower trailing arms.
Kit contains: - Front Control Arm Lower Bush Kit
- Front Control Arm Upper Bush Kit
- Front Steering Rack & Pinion Mount Bush
- Rear Panhard Rod Bush Kit
- Rear Trailing Arm Lower Bush Kit
- Rear Trailing Arm Upper Bush Kit
- Fitting Position: Front and Rear
- Fitting time [min]: 480
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | 30mm Heavy Duty 3 Position Blade Adjustable Sway Bar
| RC0127FZ-30 | 1 | | $552.00 |
Stabiliser Bar, suspension30mm Heavy Duty 3 Position Blade Adjustable Sway BarVehicle Application Information: - to suit vehicles without KDSS
If you are looking for increased cornering capabilities with decreased body roll, Roll Control sway bars are the answer! By being adjustable the Sway bar rates can be increased between 30-50% over OE sway bars by simply changing the end link position on the sway bar.
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Bush Kit
| SPF5115K | 1 | | $505.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Bush Kit- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Front | Control Arm Lower Bush Kit - Double Offset
| SPF5115XK | 1 | | $516.00 |
Mounting Kit, control/trailing arm mountingControl Arm Lower Bush Kit - Double OffsetVehicle Application Information: - this kit suits both, front & rear bushes of the lower arm
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting Position: Front
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Lower Camber Bolt Kit
| TRC0040 | 1 | | $178.00 |
Kit, camber adjustmentControl Arm Lower Camber Bolt KitComplete set of replacement Camber Bolts for one side Complete Camber Bolt solution for the Prado 150 Series.
These camber bolts overcome the problems associated with the O.E lower inner camber bolts. The trouble starts when the front lower camber bolts rust into the tubes of the standard camber bolt set up and the tube of the rear bushing. A one piece front bolt and rear bolt designed to not corrode makes future wheel alignments trouble free. - Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Control Arm Lower Complete Assembly Kit Standard - Camber Adjustable
| TRC483 | 1 | | $920.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Complete Assembly Kit Standard - Camber AdjustableLeft and right arms for standard replacement and repair upgrade fitted with uprated ball joints and SuperPro bushes to reduce arm movement. The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
TRC483 - Standard Replacement - Two Complete Arm Assemblies
- All SuperPro Bushings pre-installed
- Up-rated Ball Joints
- Improved Quality replacement Camber Bolts
The perfect replacement for your worn ball joints, worn bushes and seized camber pins! Vehicle Application Information: - does not suit KDSS vehicles
- standard replacement
- Includes Ball Joint
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Lower Complete Assembly Offset Kit - Camber & Caster Adjustable
| TRC484 | 1 | | $920.00 |
Control/Trailing Arm, wheel suspensionControl Arm Lower Complete Assembly Offset Kit - Camber & Caster AdjustableVehicle Application Information: - +/- 2 Degrees of Camber Adjustment and 0 to +4 Degrees of Caster Adjustment
Left and Right Arms for Lifted Vehicles with Extra Caster and Camber Correction fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement. The SuperPro Complete Lower Control Arm Kit will overcome the repair problems associated with seized lower inner camber bolts, worn ball joints and replacing the bushes.
TRC484 - Offset - Camber & Caster Adjustable- Two Complete Arm Assemblies
- Camber & Caster adjustable
- All SuperPro Bushings pre-installed
- Up-rated Ball Joints
- Improved Quality replacement Camber Bolts
The perfect replacement for your worn ball joints, worn bushes and seized camber pins! Vehicle Application Information: - does not suit KDSS vehicles
- alignment correction
- Includes Ball Joint
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Control Arm Replacement Ball Joint for Fixed Offset Control Arm
| KIT6480RK | 2 | | $101.00 |
Ball Joint Repair KitControl Arm Replacement Ball Joint for Fixed Offset Control ArmThis kit contains one replacement heavy-duty high-articulation ball joint for the SuperPro fixed offset Upper control arm. The kit contains a brand-new ball joint, which also includes a new dust boot, circlip, nut and any other required installation hardware. Notes: If both ball joints need replacing, two kits will be required.
This kit is used to replace the ball joint in the following part numbers: TRC6480, TRC6485, TRC6720
Vehicle Application Information: - replacement Ball Joint to suit TRC6480, TRC6485 & TRC6720 only
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Replacement Ball Joint Kit for Adjustable Control Arm
| KIT8480RK | 2 | | $178.00 |
Control Arm Replacement Ball Joint Kit for Adjustable Control Arm- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Replacement Bush Kit for Adjustable Control Arm
| KIT8470K | 1 | | $58.00 |
Control Arm Replacement Bush Kit for Adjustable Control Arm- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Replacement Bush Kit for Fixed Offset Control Arm
| KIT6480K | 2 | | $51.00 |
Control Arm Replacement Bush Kit for Fixed Offset Control Arm- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper Complete Assembly - Adjustable
| TRC8480 | 1 | | $910.00 |
Control Arm Upper Complete Assembly - AdjustableVehicle Application Information: - Provides an alignment adjustment range of between +0.5 to +3.5 degrees caster and -1.5 to +1.5 degrees camber over the OE UCA.
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 150
- Part of kit: (x)
|
Front | Control Arm Upper Complete Assembly - Fixed Offset
| TRC6480 | 1 | | $730.00 |
Control Arm Upper Complete Assembly - Fixed OffsetVehicle Application Information: - providing an increase of 2 degrees of caster and 1 degree of negative camber over the OE UCA
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting time [min]: 120
- Axle alignment required after fitting
- Fitting Position: Front
- Part of kit: (x)
|
Front | Control Arm Upper Complete Assembly Kit - Standard
| TRC491 | 1 | | $319.00 |
Control Arm Upper Complete Assembly Kit - Standard- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 150
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Upper Inner Bush Kit
| SPF2845K | 1 | | $346.00 |
Control Arm Upper Inner Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting time [min]: 240
- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 240
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Control Arm Upper Inner Bush Kit - Offset
| SPF3230K | 1 | | $346.00 |
Control Arm Upper Inner Bush Kit - OffsetVehicle Application Information: - 0.5 to 1 Degree of Camber Adjustment
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Fitting time [min]: 240
- Fitting time [min]: 240
- Axle alignment required after fitting
- Fitting Position: Front
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Differential Drop Kit
| TRCHILUXDD | 1 | | $148.00 |
Differential Drop Kit- Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Part of kit: (x)
|
Front | ReadyStrut Top Caps
| RS002 | 2 | | $106.00 |
ReadyStrut Top Caps- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Fitting Position: Front
- Part of kit: (x)
|
Front | Shock Absorber Lower Bush Kit
| SPF2348PK | 1 | | $156.00 |
Shock Absorber Lower Bush KitVehicle Application Information: - does not suit Koni & EFS Shocks
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 120
- Part of kit: (x)
|
Front | Steering Rack & Pinion Mount Bush Kit
| SPF4056K | 1 | | $108.00 |
Steering Rack & Pinion Mount Bush Kit- Fitting Position: Front
- Axle alignment required after fitting
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Strut Top Spacer Kit
| TRC008-6 | 1 | | $117.00 |
Strut Top Spacer Kit- Fitting Position: Front
- Fitting time [min]: 210
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4017L | 1 | | $39.00 |
Sway Bar Link- Fitting Difficulty: moderate
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Link
| TRC4017R | 1 | | $39.00 |
Sway Bar Link- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 30
- Part of kit: (x)
|
Front | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1285L | 1 | | $212.00 |
Sway Bar Link Kit - Heavy Duty Adjustable- Fitting Position: Front
- Fitting Difficulty: moderate
- Fitting time [min]: 60
- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 60
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF5068-29K | 1 | | $56.00 |
Sway Bar Mount Bush Kit- Fitting Difficulty: moderate
- Fitting time [min]: 30
- Fitting Position: Front
- Part of kit: (x)
|
Front | Sway Bar Mount Bush Kit
| SPF5068-31K | 1 | | |
Sway Bar Mount Bush Kit- Fitting Difficulty: moderate
- Fitting Position: Front
- Fitting time [min]: 30
- Part of kit: (x)
|
Rear | 24mm Heavy Duty 2 Position Blade Adjustable Sway Bar
| RC0127RZ-24 | 1 | | $400.00 |
24mm Heavy Duty 2 Position Blade Adjustable Sway Bar- Fitting Difficulty: difficult
- Fitting Position: Rear
- Fitting time [min]: 90
- Part of kit: (x)
|
Rear | Bump Stop Kit
| SPF5469K | 1 | | $359.00 |
Bump Stop Kit- Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Panhard Rod - Adjustable
| TRC499 | 1 | | $287.00 |
Panhard Rod - Adjustable- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 60
- Part of kit: (x)
|
Rear | Panhard Rod Bush Kit
| SPF2836K | 1 | | $124.00 |
Panhard Rod Bush Kit- Fitting Position: Rear
- Fitting Difficulty: moderate
- Fitting time [min]: 120
- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Fitting time [min]: 120
- Part of kit: (x)
|
Rear | Sway Bar Link
| TRC4040 | 2 | | $47.00 |
Sway Bar Link- Fitting Position: Rear
- Fitting time [min]: 30
- Fitting Difficulty: moderate
- Part of kit: (x)
|
Rear | Sway Bar Link - Heavy Duty Extended
| TRC4307 | 2 | | $90.00 |
Sway Bar Link - Heavy Duty Extended- Fitting Difficulty: moderate
- Fitting time [min]: 30
- Fitting Position: Rear
- Fitting Position: Front
- Part of kit: (x)
|
Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1285V | 1 | | $212.00 |
Sway Bar Link Kit - Heavy Duty Adjustable- Fitting Position: Rear
- Fitting time [min]: 30
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF4059-18K | 1 | | $60.00 |
Sway Bar Mount Bush KitVehicle Application Information: - Fitting Position: Rear
- Fitting time [min]: 60
- Fitting Difficulty: easy
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF4059-25K | 1 | | $60.00 |
Sway Bar Mount Bush Kit- Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF4059-27K | 1 | | $105.00 |
Sway Bar Mount Bush Kit- Fitting time [min]: 60
- Fitting Difficulty: easy
- Fitting Position: Rear
- Part of kit: (x)
|
Rear | Sway Bar Mount Bush Kit
| SPF5727-30K | 1 | | $51.00 |
Sway Bar Mount Bush KitVehicle Application Information: - to suit vehicles with KDSS
- Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting time [min]: 40
- Part of kit: (x)
|
Rear | Trailing Arm Lower - Adjustable Kit
| TRC497 | 1 | | $558.00 |
Trailing Arm Lower - Adjustable Kit- Fitting time [min]: 60
- Fitting Position: Rear
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Trailing Arm Lower Bush Kit
| SPF2461K | 2 | | $116.00 |
Trailing Arm Lower Bush Kit- Fitting time [min]: 210
- Fitting Position: Rear
- Fitting Difficulty: difficult
- Part of kit: (x)
|
Rear | Trailing Arm Upper - Adjustable Kit
| TRC498 | 1 | | $488.00 |
Trailing Arm Upper - Adjustable Kit- Fitting time [min]: 60
- Fitting Difficulty: difficult
- Fitting Position: Rear
- Axle alignment required after fitting
- Part of kit: (x)
|
Rear | Trailing Arm Upper Bush Kit
| SPF1760K | 2 | | $133.00 |
Trailing Arm Upper Bush Kit- Fitting Difficulty: difficult
- Axle alignment required after fitting
- Fitting Position: Rear
- Fitting time [min]: 150
- Part of kit: (x)
|