| Front | Control Arm Lower-Inner Rear Bush Kit
Please check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush. | SPF2100K | 1 |  | $239.18 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush KitPlease check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush. Standard Settings Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3776K Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution. Vehicle Application Information: - Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Please check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush. | SPF2102K | 1 | | $239.18 |
Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Double OffsetPlease check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush. Vehicle Application Information: - 1 degree caster adjustment available
Alignment Correction. Caster Adjustment Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3809K.
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Performance Handling Kit
- 66mm OD
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 150
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
Please check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush. | SPF2101K | 1 | | $239.18 |
 Mounting Kit, control/trailing arm mountingControl Arm Lower-Inner Rear Bush Kit - Single OffsetPlease check OD before ordering!
Some Hyundai/Kia models may require a 70mm OD Bush. Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Alignment Correction. Caster Adjustment Some Hyundai/Kia models may require a 70mm OD Bush, in this case please use SPF3808K. Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved.Vehicle Application Information: - Steering Pull Correction Kit
- 66mm OD
- Axle alignment required after fitting
- Fitting Difficulty: difficult
- Fitting Position: Front
- Fitting Time [min.]: 180
- Part of kit: (x)
|
| Front | Sway Bar Link
Standard Replacement | TRC4083 | 2 |  | $36.95 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 10mm Ball Joint Link to 10mm threaded Pin
Length 103mm - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Measure bar diameter 25, 27mm available, Replaces OEM 5481339100 | SPF2328-25K | 1 | | $48.81 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 25,27mm available, Replaces OEM 5481339100 available Sizes 19, 22, 24, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
suits Vehicles from 2002-on | SPF2328-25K | 1 | | $48.81 |
Mounting, stabiliserSway Bar Mount Bush Kitsuits Vehicles from 2002-on available Sizes 19, 22, 24, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
Measure bar diameter 25, 27mm available, Replaces OEM 5481339100 | SPF2328-27K | 1 | | $48.81 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 25,27mm available, Replaces OEM 5481339100 available Sizes 19, 22, 24, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
suits Vehicles from 2002-on | SPF2328-27K | 1 | | $48.81 |
Mounting, stabiliserSway Bar Mount Bush Kitsuits Vehicles from 2002-on available Sizes 19, 22, 24, 25 & 27mm Vehicle Application Information: - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Front | Sway Bar To Lower Control Arm Bush Kit
End link | SPF2092BK | 1 | | $30.54 |
Bush, shock absorberSway Bar To Lower Control Arm Bush KitEnd link - Fitting Difficulty: easy
- Fitting Position: Front
- Fitting Time [min.]: 45
- Part of kit: (x)
|
| Rear | Sway Bar Link
Cut To Length Link | TRC4004 | 2 | | $42.32 |
Stabiliser Bar, chassisSway Bar LinkCut To Length Link 10mm Ball Joint Link
Minimum Length 80mm - Maximum Length 320mm - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link
Standard Replacement | TRC4084 | 2 | | $36.95 |
Stabiliser Bar, chassisSway Bar LinkStandard Replacement 10mm Ball Joint Link
180 Degree opposed
Length 180mm center to center - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 30
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC10105 | 1 | | $210.91 |
Stabiliser Bar, chassisSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 160 mm - Maximum Length 205 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip To get the best out of these adjustable link kits, please read the fitting instructions prior to installation. - Fitting Difficulty: moderate
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
Measure bar diameter 11, 16mm available, Rep OEM 5557738600 | SPF2329-16K | 1 | | $55.30 |
Mounting, stabiliserSway Bar Mount Bush KitMeasure bar diameter 11,16mm available, Rep OEM 5557738600 - Fitting Difficulty: easy
- Fitting Position: Rear
- Fitting Time [min.]: 60
- Part of kit: (x)
|
