| Front | Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees camber | SPF4351-12K | 1 |  |
Kit, camber adjustmentCamber Adjusting Bolt KitAdds +/- 1.5 Degrees camber Camber Bolt Kit 12mm - Fitting Position: Front
- Part of kit: (x)
|
| Front | Control Arm Lower-Front Bush Kit
| SPF1160K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Front Bush KitCrush Tube 16 x 12 x 60 - Axle alignment required after fitting
 Fitment Difficulty- Fitting Position: Front
 2.5hrs Fitment Time- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Standard replacement | SPF1500K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitStandard replacement - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Alignment Correction | SPF1502K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitAlignment Correction Vehicle Application Information: - 1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit
Anti Lift & Caster Increase | SPF1502XK | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush KitAnti Lift & Caster Increase - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction for Performance | SPF1502AK | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Double OffsetAlignment Correction for Performance Vehicle Application Information: - 1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.
Follow the installation instructions and enjoy the results! Vehicle Application Information: - Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Control Arm Lower-Inner Rear Bush Kit - Single Offset
Alignment Correction | SPF1501K | 1 | |
Control Arm-/Trailing Arm BushControl Arm Lower-Inner Rear Bush Kit - Single OffsetAlignment Correction Vehicle Application Information: - 0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturer's specifications.
Supplied with an offset bush to be fitted to the passenger side and a standard bush for the driver's side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.
Follow the installation instructions and the problem is solved. Vehicle Application Information: - Steering Pull Correction Kit
- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Front
- 2.5hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1344-17K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 12, 16, 17, 18, 19, 20 & 22mm Vehicle Application Information:  Fitment Difficulty- Fitting Position: Front
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1344-18K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 12, 16, 17, 18, 19, 20 & 22mm Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Front | Sway Bar Mount Bush Kit
| SPF1344-19K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 12, 16, 17, 18, 19, 20 & 22mm Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Front
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Link
Standard Replacement | TRC4006 | 2 |  |
Sway Bar Stabiliser KitSway Bar LinkStandard Replacement 10mm Ball Joint Link
65-70mm center to center - Fitment Difficulty
- Fitting Position: Rear
- 0.5hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Link Bush Kit
| SPF2092BK | 1 | |
Bush, shock absorberSway Bar Link Bush Kit- Fitment Difficulty
- Fitting Position: Rear
- 0.75hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Link Kit - Heavy Duty Adjustable
| TRC1025 | 1 | |
Sway Bar Stabiliser KitSway Bar Link Kit - Heavy Duty Adjustable10mm Ball Joint Adjustable Link
Minimum Length 75 mm - Maximum Length 85 mm Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.
Features & Benefits- 6060-T5 Alloy Link
- Ball for low friction and long life
- Spanner provision for on-car adjustment
- Eliminates sway bar link flex
- Allows for neutral sway bar positioning
- Maximises all positions on adjustable Sway Bars
- Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.  Fitment Difficulty- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF2004-19K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 17, 18, 19 & 20mm Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Sway Bar Mount Bush Kit
| SPF2004-20K | 1 | |
Sway Bar Bush KitSway Bar Mount Bush Kitavailable Sizes 17, 18, 19 & 20mm Vehicle Application Information: - Fitment Difficulty
- Fitting Position: Rear
- 1hrs Fitment Time
- Part of kit: (x)
|
| Rear | Trailing Arm Lower-Front Bush Kit
| SPF1574K | 1 | |
Control Arm-/Trailing Arm BushTrailing Arm Lower-Front Bush Kit- Axle alignment required after fitting
- Fitment Difficulty
- Fitting Position: Rear
- 3hrs Fitment Time
- Part of kit: (x)
|
